EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 392 (2024) MATEC Web Conf., 392 (2024) 01029 References
Open Access
Issue
MATEC Web Conf.
Volume 392, 2024
International Conference on Multidisciplinary Research and Sustainable Development (ICMED 2024)
Article Number 01029
Number of page(s) 28
DOI https://doi.org/10.1051/matecconf/202439201029
Published online 18 March 2024
  1. F.J. Eshagh, R.Barry, E.Tanbour, Analytical and experimental vibration of sandwich beams having various boundary conditions, shock vibration, hindawi, Vol.1, 2018. https://doi.org/10.1155/2018/3682370 [Google Scholar]
  2. M.A. Maha, A. Nady, Free vibration analysis of sandwich beam structure using finite element approach, IOSR-JMCE, Vol. 12, pp. 34-42, 2015. 10.9790/1684-12613442 [Google Scholar]
  3. K.Mohan 1, T. H. Yip 1, I. Sridhar 2, and H. P. Seow, Design of Hybrid Sandwich Panel with Aluminum Foam Core and Carbon Fiber Reinforced Plastic Face Sheets under Three-Point Bending, Solid State Phenomena, Vol. 111, pp 63-66, 2006. 10.4028/www.scientific.net/SSP.111.63 [CrossRef] [Google Scholar]
  4. Isaac m. daniel, Influence of Core Properties on the Failure of Composite Sandwich Beams, Journal of Mechanics of Materials and Structures, vol. 4, no. 7-8, 2009. https://doi.org/10.2140/jomms.2009.4.1271 [Google Scholar]
  5. M.J. Cunningham, D.F.L. Jenkins, W.W. Clegg, M.M. Bakush, Active vibration control and actuation of a small cantilever for applications in scanning probe instruments, Sensor. Actuator. A 50 (1995) 147-150 [CrossRef] [Google Scholar]
  6. A.H. El-Sinawi, Active vibration isolation of a flexible structure mounted on a vibrating elastic base, J. Sound Vib. 271 (2004) 323-337. [CrossRef] [Google Scholar]
  7. P. Gardonio, S.J. Elliot, R.J. Pinnington, Active isolation of structural vibration on a multiple-degree-of-freedom system, part I: the dynamics of the system, J. Sound Vib. 207 (1) (1997) 61-93. [CrossRef] [Google Scholar]
  8. C.E. Kaplow, C.E. Velman Jr. , Active local vibration isolation applied to a flexible space telescope, AIAA J. Guid. Control 3 (1998) 227-233. [Google Scholar]
  9. Vincenzo Crupi, Roberto Montanini, Aluminum Foam Sandwiches Collapse Modes Under Static and Dynamic Three-Point Bending, International Journal of Impact Engineering, Vol. 34(3), pp 509-521, 2007. [CrossRef] [Google Scholar]
  10. P. Gardonio, S.J. Elliot, R.J. Pinnington, Active isolation of structural vibration on a multiple-degree-of-freedom system, part II: effectiveness of the active control strategies, J. Sound Vib. 207 (1) (1997) 95-121. [CrossRef] [Google Scholar]
  11. William D. Callister Jr. , Materials Science and Engineering –an Introduction, Hand book, Wiley, 8th Edition Binder Ready Version edition, 2010. [Google Scholar]
  12. P. Seshu, Textbook of Finite Element Analysis, PHI Learning Pvt. Ltd., 2003. [Google Scholar]
  13. Rivello, Robert M., Theory and Analysis of Flight Structures, McGraw-Hill College, 1969. [Google Scholar]
  14. Beards, C., Structural Vibration: analysis and Damping, Butterworth-Heinemann, 1996. [Google Scholar]
  15. R. Luck, E.I. Agba, On the design of piezoelectric sensors and actuators, ISA Trans. 37 (1998) 65 –72. [CrossRef] [Google Scholar]
  16. S. Hanagud, M.W. Obal, A.J. Calise, Optimal vibration control by the use of piezoelectric sensors and actuators, J. Guided Control Dyn. 15(5) (1992) 1199 –1206. [CrossRef] [Google Scholar]
  17. P. Gaudenzi, R. Carbonaro, Vibration control of an active laminated beam, Compos. Struct. 38 (1997) 413-420. [Google Scholar]
  18. Hari P. Konka, M.A. Wahab, K.Lian, Piezoelectric fiber composite transducers for health monitoring in composite structures, [Google Scholar]
  19. W.S. Hwang, H.C. Parkt, Finite element Modeling of piezoelectric sensors and actuators, AIAA J. 31 (5) (1993) 413-420. [Google Scholar]
  20. S. D.Senturia, CAD Challenges for microsensors, microactuators, and microsystems, IEEE 86 (8) (1998) 1611-1626. [CrossRef] [Google Scholar]
  21. O. Nagler, M. Trost, B.Hillerich, F. Kozlowski, Efficient design and optimization of MEMS by integrating commercial simulation tools, Sensors Actuators A 66 (1998) 5 –20. [Google Scholar]
  22. D.H. Wu, Y.J. Tsai, Y.T. Yen, Robust design of quartz crystal microbalance using finite element and Taguchi method, Sens. Actuat.B (2003) 337-344. [Google Scholar]
  23. S. Jun, Z. Zhaowei, Finite element analysis of a IBM suspension integrated with a PZT microactuator A 100 (2001) 257 –263. [Google Scholar]
  24. ANSYS® 2010. Academic Research, Release 13.0, Help System, Coupled Field Analysis Guide, ANSYS, Inc. [Google Scholar]
  25. Zuzana Lasova, Robert Zemcik, “Comparison of finite element models for piezoelectric materials. [Google Scholar]
  26. G. C. Sih and S. E. Hsu, “Advanced Composite Materials and Structures” – Publisher VNU Science Press BV. [Google Scholar]
  27. Kersey AD, Davis MA, Patrick HJ, LeBlanc M, Koo KP, Askins CG, Putnam MA, and Friebele EJ. Fiber grating sensors, Journal of Lightwave Technol., Vol. 15, No. 8, pp 1442-1463, 1997. [CrossRef] [Google Scholar]
  28. Allik H, Hughes TJ, Finite element method for piezoelectric vibration, Int J Numer Meth Eng 2:151-168. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.