Open Access
| Issue |
MATEC Web Conf.
Volume 390, 2024
3rd International Scientific and Practical Conference “Energy-Optimal Technologies, Logistic and Safety on Transport” (EOT-2023)
|
|
|---|---|---|
| Article Number | 04012 | |
| Number of page(s) | 6 | |
| Section | Modeling and Computer Engineering, Modernization and Repair of Transport Facilities, Materials Science and Extension of the Resource of Structural Elements | |
| DOI | https://doi.org/10.1051/matecconf/202439004012 | |
| Published online | 24 January 2024 | |
- C.M Taylor. Automobile engine tribology—design considerations for efficiency and durability. Wear, 1998, Vol. 221, Issue 1, P. 1–8. [CrossRef] [Google Scholar]
- F.S. Silva. Fatigue on engine pistons – A compendium of case studies. Engineering Failure Analysis, 2006 . Vol. 13. p. 480–492. [CrossRef] [Google Scholar]
- M. Priest, C.M. Taylor. Automobile engine tribology — approaching the surface. Wear, 2000. Vol. 241, Issue 2. P. 193–203. [CrossRef] [Google Scholar]
- R. C. Singh, Roop. Lal, Ranganath M. S., Rajiv Chaudhary. Failure of Piston in IC Engines: A Review. International Journal Of Modern Engineering Research, 2014. Vol. 4 , Iss.9. P. 1 – 10. [Google Scholar]
- DSTU 3752-98. Aluminum alloys for the manufacture of pistons. Specifications. 1998. – 7 pp. [Google Scholar]
- DSTU 2839-94. Cast aluminum alloys. Specifications. The official publication. Kyiv: State Standard of Ukraine, 1994. – 48 pp. [Google Scholar]
- Spectrometer Elvax. http://www.zolotinka.net/ser01.html [Google Scholar]
- ASM Handbook Volume 9: Metallography and Microstructures, 9th ed. Edited by George F. Vander Voort. ASM International, 2004. Vol.9. 1184 p. [Google Scholar]
- DSTU ISO 6507-1:2007 Metallic materials. Determination of Vickers hardness. Part 1. Test method. K.: State Consumer Standard of Ukraine, 2018. – 20 pp. [Google Scholar]
- S. Manasijević, N. Dolić, K. Raić, R. Radiša. Identification of Phases Formed by Cu and Ni in Al−Si Piston Alloys. La Metallurgia Italiana - Issue 3, 2014. – P. 13 – 19. [Google Scholar]
- Yang Yang , Kuilong Yu , Yunguo Li , Degang Zhao , Xiangfa Liu. Evolution of nickel-rich phases in Al–Si–Cu–Ni–Mg piston alloys with different Cu additions. Materials & Design. 2012, Vol. 33. Pages 220–225. [CrossRef] [Google Scholar]
- Joyce, M.R., Styles, C.M. and Reed, P.A.S. Elevated temperature short crack fatigue behaviour in near eutectic Al-Si alloys. International Journal of Fatigue. 2003, Vol. 25, Issue 9-11, P.863–869. [CrossRef] [Google Scholar]
- Lu, L.; Nogita, K.; Dahle, A.K. Combining Sr and Na additions in hypoeutectic Al–Si foundry alloys. Materials Science Engineering. A 2005, 399, P 244 – 253. [CrossRef] [Google Scholar]
- G.K. Sigworth, Modification of Aluminum-Silicon Alloys, in: ASM Handbook, Vol. 15 Casting, 2008. pp. 240–254. [Google Scholar]
- H. S. Dai, X. F. Liu. Optimal holding temperatures and phosphorus additions for primary silicon refinement in Al–high Si alloys. Materials Science and Technology, 2009. Vol. 25, № 10. P. 1183 – 1188. [CrossRef] [Google Scholar]
- Sigworth G. K. The Modification of Al-Si Casting Alloys: Important Practical and Theoretical Aspects. International Journal of Metalcasting 2008. Vol. 2, Р. 19 – 40. [CrossRef] [Google Scholar]
- Nachiket K. Analysis of piston failure – A rewiew. – Maharashtra : Lokmanya Tilak College of Engineering, Department of Mechanical Engineering. International journal of innovations in engineering and technology (IJIET), 2016. P 138 – 146. [Google Scholar]
- Kovbasiuk T.M., Selivorstov V.Yu., Dotsenko Yu.V., Duriagina Z.A., Kulyk V.V., Kasai O.M., Voitovych V.V. The effect of the modification by ultrafine silicon carbide powder on the structure and properties of the Al-Si alloy // Archives of Materials Science and Engineering. – 2020. – Vol. 101. – № 2. – P.57–62. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.