EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 378 (2023) MATEC Web Conf., 378 (2023) 05007 References
Open Access
Issue
MATEC Web Conf.
Volume 378, 2023
SMARTINCS’23 Conference on Self-Healing, Multifunctional and Advanced Repair Technologies in Cementitious Systems
Article Number 05007
Number of page(s) 8
Section Self-Sensing, Monitoring and Inspection of Concrete Structures and Infrastructure
DOI https://doi.org/10.1051/matecconf/202337805007
Published online 28 April 2023
  1. United Nations Environment Programme, “Sand and sustainability UNEP 2019,” UNEP. Sand and sustainability, 2019. [Google Scholar]
  2. “Readily implementable techniques can cut annual CO 2 emissions from the production of concrete by over 20%,” 2016, doi: 10.1088/1748-9326/11/7/074029. [Google Scholar]
  3. T. Dhondy, A. Remennikov, and M.N. Shiekh, “Benefits of using sea sand and seawater in concrete: a comprehensive review,” Australian Journal of Structural Engineering, vol. 20, no. 4. pp. 280–289, 2019. doi: 10.1080/13287982.2019.1659213. [CrossRef] [Google Scholar]
  4. T. Jose, M.P. Benny, and U.G. Scholar, “Feasibility of Sea-Sand Sea-Water Concrete,” vol. 8, no. 08, pp. 18–25, 2019. [Google Scholar]
  5. J. Xiao, C. Qiang, A. Nanni, and K. Zhang, “Use of sea-sand and seawater in concrete construction: Current status and future opportunities,” Constr Build Mater, vol. 155, pp. 1101–1111, 2017, doi: 10.1016/j.conbuildmat.2017.08.130. [CrossRef] [Google Scholar]
  6. U. Ebead, D. Lau, F. Lollini, A. Nanni, P. Suraneni, and T. Yu, “A review of recent advances in the science and technology of seawater-mixed concrete,” Cem Concr Res, vol. 152, Feb. 2022, doi: 10.1016/j.cemconres.2021.106666. [CrossRef] [Google Scholar]
  7. P. Li, W. Li, Z. Sun, L. Shen, and D. Sheng, “Development of sustainable concrete incorporating seawater : A critical review on cement hydration , microstructure and mechanical strength,” Cem Concr Compos, vol. 121, no. May, p. 104100, 2021, doi: 10.1016/j.cemconcomp.2021.104100. [CrossRef] [Google Scholar]
  8. A. Dasar, D. Patah, H. Hamada, Y. Sagawa, and D. Yamamoto, “Applicability of seawater as a mixing and curing agent in 4-year-old concrete,” Constr Build Mater, vol. 259, p. 119692, 2020, doi: 10.1016/j.conbuildmat.2020.119692. [CrossRef] [Google Scholar]
  9. T. Dhondy, A. Remennikov, and M.N. Shiekh, “Benefits of using sea sand and seawater in concrete: a comprehensive review,” Australian Journal of Structural Engineering, vol. 20, no. 4. pp. 280–289, 2019. doi: 10.1080/13287982.2019.1659213. [CrossRef] [Google Scholar]
  10. H. Allam, F. Duplan, S. Amziane, and Y. Burtschell, “Assessment of manufacturing process efficiency in the dispersion of carbon fibers in smart concrete by measuring AC impedance,” Cem Concr Compos, vol. 127, Mar. 2022, doi: 10.1016/j.cemconcomp.2021.104394. [CrossRef] [Google Scholar]
  11. J. Donnini, T. Bellezze, and V. Corinaldesi, “Mechanical, electrical and self-sensing properties of cementitious mortars containing short carbon fibers,” Journal of Building Engineering, vol. 20, pp. 8–14, Nov. 2018, doi: 10.1016/j.jobe.2018.06.011. [CrossRef] [Google Scholar]
  12. S. Erdem, S. Hanbay, and M.A. Blankson, “Self- sensing damage assessment and image-based surface crack quantification of carbon nanofibre reinforced concrete,” Constr Build Mater, vol. 134, pp. 520–529, 2017, doi: 10.1016/j.conbuildmat.2016.12.197. [CrossRef] [Google Scholar]
  13. D.D.L. Chung, “Self-monitoring structural materials,” Materials Science and Engineering R: Reports, vol. 22, no. 2, pp. 57–78, 1998, doi: 10.1016/S0927-796X(97)00021-1. [CrossRef] [Google Scholar]
  14. N. Banthia, S. Djeridane, and M. Pigeon, “ELECTRICAL RESISTIVITY OF CARBON AND STEEL MICRO-FIBER REINFORCED CEMENTS,” Cem Concr Res, vol. 5, no. 1, pp. 1–8, 1992, [Online]. Available: https://ejournal.poltektegal.ac.id/index.php/siklus/article/view/298%0Ahttp://repositorio.unan.edu.ni/2986/1/5624.pdf%0Ahttp://dx.doi.org/10.1016/j.jana.2015.10.005%0Ahttp://www.biomedcentral.com/1471-2458/12/58%0Ahttp://ovidsp.ovid.com/ovidweb.cgi?T=JS&P [Google Scholar]
  15. A. Belli, A. Mobili, T. Bellezze, and F. Tittarelli, “Commercial and recycled carbon/steel fibers for fiber-reinforced cement mortars with high electrical conductivity,” Cem Concr Compos, vol. 109, no. September 2019, p. 103569, 2020, doi: 10.1016/j.cemconcomp.2020.103569. [CrossRef] [Google Scholar]
  16. H. Nguyen, V. Carvelli, T. Fujii, and K. Okubo, “Cement mortar reinforced with reclaimed carbon fibres, CFRP waste or prepreg carbon waste,” Constr Build Mater, vol. 126, pp. 321–331, 2016, doi: 10.1016/j.conbuildmat.2016.09.044. [CrossRef] [Google Scholar]
  17. A. Al-Dahawi, F. Emami, G. Yildirim, and S. Mustafa, “Effect of mixing methods on the electrical properties of cementitious composites incorporating different carbon-based materials,” vol. 104, pp. 160–168, 2016, doi: 10.1016/j.conbuildmat.2015.12.072. [Google Scholar]
  18. L. Montanari, P. Suraneni, and M.T. Chang, “Hydration , Pore Solution, and Porosity of Cementitious Pastes Made with Seawater,” no. May, 2019, doi: 10.1061/(ASCE)MT.1943-5533.0002818. [Google Scholar]
  19. F. Yousuf, X. Wei, and J. Tao, “Evaluation of the influence of a superplasticizer on the hydration of varying composition cements by the electrical resistivity measurement method,” Constr Build Mater, vol. 144, pp. 25–34, Jul. 2017, doi: 10.1016/j.conbuildmat.2017.03.138. [CrossRef] [Google Scholar]
  20. F. Emami, G. Yildirim, and S. Mustafa, “Effect of mixing methods on the electrical properties of cementitious composites incorporating different carbon-based materials,” vol. 104, pp. 160–168, 2016, doi: 10.1016/j.conbuildmat.2015.12.072. [Google Scholar]
  21. H. Yu, Y. Lei, C. Pei, L. Wei, J.H. Zhu, and F. Xing, “Enhancing the mechanical and functional performance of carbon fiber reinforced cement mortar by the inclusion of a cost-effective graphene nanofluid additive,” Cem Concr Compos, vol. 134, Nov. 2022, doi: 10.1016/j.cemconcomp.2022.104777. [Google Scholar]
  22. B. Chen, K. Wu, and W. Yao, “Conductivity of carbon fiber reinforced cement-based composites,” Cem Concr Compos, vol. 26, no. 4, pp. 291–297, May 2004, doi: 10.1016/S0958-9465(02)00138-5. [CrossRef] [Google Scholar]
  23. W. Pichor, M. Frac, and M. Radecka, “Determination of percolation threshold in cement composites with expanded graphite by impedance spectroscopy,” Cem Concr Compos, vol. 125, no. February 2021, 2022, doi: 10.1016/j.cemconcomp.2021.104328. [Google Scholar]
  24. F. Rajabipour, J. Weiss, J.D. Shane, T.O. Mason, and S.P. Shah, “Procedure to Interpret Electrical Conductivity Measurements in Cover Concrete during Rewetting”, doi: 10.1061/ASCE0899-1561200517:5586. [Google Scholar]
  25. McCarter and Brousseau, “THE A.C. RESPONSE OF HARDENED CEMENT PASTE,” Cem Concr Res, vol. 20, 1990. [Google Scholar]
  26. D.D.L. Chung, “Electrically conductive cement- based materials,” no. 4, pp. 167–176, 2004. [Google Scholar]
  27. K.M. Emran and H. AL-Refai, “Electrochemical and surface investigation of Ni-Cr glassy alloys in nitric acid solution,” Int J Electrochem Sci, vol. 12, no. 7, pp. 6404–6416, Jul. 2017, doi: 10.20964/2017.07.43. [CrossRef] [Google Scholar]
  28. N. Naderi, M.R. Hashim, K.M.A. Saron, and J. Rouhi, “Enhanced optical performance of electrochemically etched porous silicon carbide,” Semicond Sci Technol, vol. 28, no. 2, Feb. 2013, doi: 10.1088/0268-1242/28/2/025011. [CrossRef] [Google Scholar]
  29. S. Sen and P.K. Dutta, “Realization of a Constant Phase Element and Its Performance Study in a Differentiator Circuit,” IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 53, no. 9, pp. 802–806, 2006, doi: 10.1109/TCSII.2006.879102. [CrossRef] [Google Scholar]
  30. B. Han, S. Ding, and X. Yu, “Intrinsic self-sensing concrete and structures: A review,” Measurement, vol. 59, pp. 110–128, Jan. 2015, doi: 10.1016/J.MEASUREMENT.2014.09.048. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.