EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 370 (2022) MATEC Web Conf., 370 (2022) 10005 References
Open Access
Issue
MATEC Web Conf.
Volume 370, 2022
2022 RAPDASA-RobMech-PRASA-CoSAAMI Conference - Digital Technology in Product Development - The 23rd Annual International RAPDASA Conference joined by RobMech, PRASA and CoSAAMI
Article Number 10005
Number of page(s) 10
Section Product Development
DOI https://doi.org/10.1051/matecconf/202237010005
Published online 01 December 2022
  1. P. Kumaar, Study of the effect of brazing on mechanical properties of Aluminium alloys for automotive heat exchangers, (2017), PhD Thesis. [Google Scholar]
  2. R.D Tait, C.J Rogers, A.J Cottone, J.P Henkes, Z.P Saperstein. Corrosion resistance of the as brazed pf heat exchanger as achieved by alloy selection. Warrendale, PA: Society of Automotive Engineers [SAE]; 1991. SAE technical paper 910594. [Google Scholar]
  3. S.D Meijers, C.E Calcedo Martinez, S Desikan. Tube-fin interaction – a closer look at the corrosión mechanism. Warrendale, PA: Society of Automotive Engineers [SAE]; 2005. SAE technical paper 2005-01-2027. [Google Scholar]
  4. W S Miller, L Zhuang, J Bottema, A J Wittebrood, P De Smet, A Haszler and A Vieregge. (2000), Recent Development in Aluminium Alloys for the Automotive Industry. Materials Science and Engineering A, 280, 37-49. https://doi.org/10.1016/S0921-5093(99)00653-X [CrossRef] [Google Scholar]
  5. V C Gudla, K Rechendorff, Z I Balogh, T Kasama and R Ambat, Brown band characteristics of aluminum cladding alloys, Materials Science and Engineering 572 (2019) 012034, Des 89 1071–1078 [Google Scholar]
  6. J. S. Yoon, S. H. Lee, and M. S. Kim, Fabrication and brazeability of a three-layer 4343/3003/4343 aluminum clad sheet by rolling, Journal of Materials Processing Technology, 111, 85 (2001). [CrossRef] [Google Scholar]
  7. J. Lacaze and S. Tierce, Study of the microstructure resulting from brazed aluminium materials used in heat exchangers, Materials Science and Engineering: A Volumes 413–414, 15 December 2005, Pages 317-321 [CrossRef] [Google Scholar]
  8. M Bane; F Miculescu; Ai Blajan; M Dinu; I Antoniac; Failure analysis of some retrieved orthopedic implants based on materials characterization, solid state phenomena, volume 188, pages 114-117, 2012 [CrossRef] [Google Scholar]
  9. N.L Sukiman; X Zhou; N Birbilis, J.M.; Mol, S.J.; Garcia, X Zhou; Thompson, G.E. Durability and corrosion of aluminium and its alloys: Overview, property space, techniques and developments. In Aluminium Alloys—New Trends in Fabrication and Applications; Ahmad, Z., Ed.; InTech: Rijeka, Croatia, 2013; pp. 47–97. ISBN 978-953-51-0861-0. [Google Scholar]
  10. R. Jamaati, and M. Reza, Manufacturing of high-strength aluminum/alumina composite by accumulative roll bonding, (2010), Materials Science and Engineering A 527 (2010) pp. 4146–4151 [Google Scholar]
  11. R. Jamaati, M.R. Toroghinejad, Mater. Sci. Eng. A 527 (2010) 2320–2326. [CrossRef] [Google Scholar]
  12. N. Bay, Met. Construct. 18 (6) (1986) 625–629 [Google Scholar]
  13. Aluminium brazing sheet construction (https://www.aluminiumbrazing.com/2010/09/29/cladding-alloys, Accessed 26 June 2020. [Google Scholar]
  14. K. Schäuble, Silica passivation layer on aluminium brazing sheets, 2010 [Google Scholar]
  15. ASTM G85 Annex A3: Acidified Synthetic Sea Water (Fog) Testing. 2003, ASTM International. [Google Scholar]
  16. ASTMG5. (2013). Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements, available from ASTM Headquarters Order PCN 12-700050-00. [Google Scholar]
  17. Q. Shi, F. Liang, B Cheadle, Electrochemical behaviors of quad-layer aluminum brazing sheet composite for automotive applications. Corrosion 2004; 60:492–500. [CrossRef] [Google Scholar]
  18. K Fushimi, S Yamamoto, R Ozaki, H Habazaki, Cross-section corrosionpotential profiles of aluminum alloy brazing sheets observed by the flowing electrolyte scanning-droplet-cell techniques. Electrochim Acta, 2008; 53:2529–37. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.