EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 370 (2022) MATEC Web Conf., 370 (2022) 11001 References
Open Access
Issue
MATEC Web Conf.
Volume 370, 2022
2022 RAPDASA-RobMech-PRASA-CoSAAMI Conference - Digital Technology in Product Development - The 23rd Annual International RAPDASA Conference joined by RobMech, PRASA and CoSAAMI
Article Number 11001
Number of page(s) 10
Section AM Post Processing & Qualification
DOI https://doi.org/10.1051/matecconf/202237011001
Published online 01 December 2022
  1. I. Yadroitsev, P. Krakhmalev, and I. Yadroitsava, Selective laser melting of Ti6Al4V alloy for biomedical applications: Temperature monitoring and microstructural evolution, 583, 404–409 (2014) [Google Scholar]
  2. J. V. Gordon, Defect structure process maps for laser powder bed fusion additive manufacturing, 36, 101-552 (2020) [Google Scholar]
  3. H. Lee, C. H. J. Lim, M. J. Low, N. Tham, V. M. Murukeshan, and Y. J. Kim, Lasers in additive manufacturing, 4, 307–322 (2017) [Google Scholar]
  4. M. A. Obeidi, Results in Engineering Metal additive manufacturing by laser-powder bed fusion: Guidelines for process optimisation, 15 (2022) [Google Scholar]
  5. M. Shange, I. Yadroitsava, S. Pityana, I. Yadroitsev, and D. Bester, Surface morphology characterisation for parts produced by the high speed selective laser melting, 655, (2019) [Google Scholar]
  6. S. J. Davies, S. P. Jeffs, M. P. Coleman, and R. J. Lancaster, Effects of heat treatment on microstructure and creep properties of a laser powder bed fused nickel superalloy, 159, 39–46 (2018) [Google Scholar]
  7. I. van Zyl, I. Yadroitsava, and I. Yadroitsev, Residual stress in TI6AL4V objects produced by direct metal laser sintering, 27, 134–141 (2016) [Google Scholar]
  8. A. P. Nagalingam, M. S. Vohra, P. Kapur, and S. H. Yeo, Effect of cut-off, evaluation length, and measurement area in profile and areal surface texture characterization of as-built metal additive manufactured components, 11, (2021) [Google Scholar]
  9. E. Masiagutova, F. Cabanettes, A. Sova, M. Cici, G. Bidron, and P. Bertrand, Side surface topography generation during laser powder bed fusion of AlSi10Mg, 47 (2021) [Google Scholar]
  10. S. Pal The effects of locations on the build tray on the quality of specimens in powder bed additive manufacturing, 112, 1159–1170 (2021) [Google Scholar]
  11. Z. Chen, X. Wu, D. Tomus, and C. H. J. Davies, Surface roughness of Selective Laser Melted Ti-6Al-4V alloy components, 21, 91–103 (2018) [Google Scholar]
  12. N. M. Huang Analyzing the Surface Finish of Knee Implants to Determine Criteria for Applications in Direct Metal Laser Sintering, (2012) [Google Scholar]
  13. S. Mat, Shoulder Prostheses, 1–6, (2004) [Google Scholar]
  14. ISO 17757, INTERNATIONAL STANDARD iTeh STANDARD iTeh STANDARD PREVIEW, Int. Organ. Stand, 10406–1: 20, 3–6 2019. [Google Scholar]
  15. S. Standard, “iTeh STANDARD PREVIEW iTeh STANDARD PREVIEW,” 1 2–5 (2020) [Google Scholar]
  16. DRAFT INTERNATIONAL STANDARD ISO/DIS 21535 Non-active surgical implants — Joint replacement implants — Specific requirements for hip-joint replacement implants ISO/CEN PARALLEL PROCESSING, (2021) [Google Scholar]
  17. A. Wennerberg and T. Albrektsson, Effects of titanium surface topography on bone integration: A systematic review, 20, 172–184 (2009) [Google Scholar]
  18. M. I. Z. Ridzwan, S. Shuib, A. Y. Hassan, A. A. Shokri, and M. N. Mohammad Ibrahim, Problem of stress shielding and improvement to the hip implant designs, Journal of Medical Sciences, 7, 460–467, (2007) [CrossRef] [Google Scholar]
  19. A. Barfeie, J. Wilson, and J. Rees, Implant surface characteristics and their effect on osseointegration, 218 (2015) [Google Scholar]
  20. D. Rodriguez, F. J. Gil, J. M. Manero, J. A. Planell, C. Fonseca, and M. Barbosa, Improvement of hardness and wear resistance of titanium and Ti6Al4V by nitrogen diffusion, 2, 908–913 (1999) [Google Scholar]
  21. I. Yadroitsev, A. Du Plessis, and I. Yadroitsava, Basics of laser powder bed fusion, Fundamental Laser Powder Bed Fusion Met, 15–38 (2021) [CrossRef] [Google Scholar]
  22. S. Pal, As-fabricated surface morphologies of Ti-6Al-4V samples fabricated by different laser processing parameters in selective laser melting, 33 (2020) [Google Scholar]
  23. D. Simson and S. K. Subbu, Effect of Process Parameters on Surface Integrity of LPBF Ti6Al4V, Procedia CIRP, 108, 716–721, (2022) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.