Open Access
Issue
MATEC Web Conf.
Volume 361, 2022
Concrete Solutions 2022 – 8th International Conference on Concrete Repair, Durability & Technology
Article Number 06004
Number of page(s) 6
Section Theme 6 - Durability Performance of Concrete
DOI https://doi.org/10.1051/matecconf/202236106004
Published online 30 June 2022
  1. Custódio, J. & Ribeiro, A. B., “Internal expansive reactions in concrete structures - Deterioration of the mechanical properties”. Ciência & Tecnologia dos Materiais, vol. 27, (2), pp. 108–114, 2015. https://doi.org/10.1016/j.ctmat.2015.07.003 [CrossRef] [Google Scholar]
  2. Bauer, S.; Cornell, B.; Figurski, D.; Ley, T.; Miralles, J. & Folliard, K., “Preventing Alkali-Silica Reaction and Delayed Ettringite Formation in New Concrete: A Literature Review (CTR Technical Report 0-4085-1)”, The University of Texas at Austin, Center for Transportation Research: Red River, Austin, TX, 2006. [Google Scholar]
  3. LNEC, “Especificação LNEC E 461:2021 Betões. Metodologias para prevenir reações químicas expansivas de origem interna (LNEC Specification E 461:2021 Concrete. Methodologies to prevent expansive chemical reactions of internal origin) (in Portuguese)”. Laboratório Nacional de Engenharia Civil, I.P. (LNEC): Lisboa, Portugal, 2021. [Google Scholar]
  4. Gonçalves, A. & Custódio, J., “As reacções expansivas internas no betão. Prevenção dos riscos (Internal Expansive Reactions in Concrete. Risks prevention). Workshop – Prevenção dos riscos e gestão das estruturas afectadas (Risks prevention and management of affected structures)”, in Encontro Nacional sobre Conservação e Reabilitação de Estruturas – REABILITAR 2010 (National Encounter on Structures Conservation and Rehabilitation). Lisboa, Portugal. 2010. [Google Scholar]
  5. Renaud-Pierre, M.; Bazin, C. & Toutlemonde, F., “Alkali aggregate reaction and delayed ettringite formation: common features and differences”, in 14th International Conference on Alkali-Aggregate Reaction – ICAAR 2012. France. 2012. [Google Scholar]
  6. Lindgård, J., “RILEM TC 219-ACS-P Literature survey on performance testing (Technical Report No. 27)”. SINTEF Building and Infrastructure: Oslo, Norway, 2011. [Google Scholar]
  7. Giannini, E. R.; Bentivegna, A. F. & Folliard, K. J., “Coatings and Overlays for Concrete Affected by Alkali-Silica Reaction”, in 4th International Conference on Concrete Repair. Dresden, Germany. 2011. [Google Scholar]
  8. Lute, R. D.; Folliard, K. J.; Drimalas, T. & Rust, C. K., “Coatings and sealers for mitigation of alkali-silica reaction and/or delayed ettringite formation”, in 15th International Conference on Alkali-Aggregate Reaction – ICAAR 2016. São Paulo, Brazil. 2016. [Google Scholar]
  9. Custódio, J.; Bettencourt Ribeiro, A.; Costa, D.; Santos Silva, A. & Gonçalves, A., “Methodologies for avoiding the deleterious development of expansive chemical reactions in concrete - LNEC Specification E 461:2020”, in Webinar of the 4th International Dam World Conference - DW 2020. Lisbon, Portugal. 2020. [Google Scholar]
  10. CEN, “EN 1504-2:2004 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Part 2: Surface protection systems for concrete”. European Committee for Standardization (CEN): Brussels, Belgium, 2004. [Google Scholar]
  11. CEN, “EN 1062-3:2008 Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Part 3: Determination of liquid water permeability”. European Committee for Standardization (CEN): Brussels, Belgium, 2008. [Google Scholar]
  12. CEN, “EN ISO 7783:2018 Paints and varnishes. Determination of water-vapour transmission properties. Cup method”. European Committee for Standardization (CEN): Brussels, Belgium, 2018. [Google Scholar]
  13. CEN, “EN 1062-7:2004 Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Part 7: Determination of crack bridging properties”. European Committee for Standardization (CEN): Brussels, Belgium, 2004. [Google Scholar]
  14. CEN, “EN 1766:2000 Products and systems for the protection and repair of concrete structures. Test methods. Reference concretes for testing”. European Committee for Standardization (CEN): Brussels, Belgium, 2000. [Google Scholar]
  15. CEN, “EN 197-1:2011 Cement. Composition, specifications and conformity criteria for common cements”. European Committee for Standardization (CEN): Brussels, Belgium, 2011. [Google Scholar]
  16. CEN, “EN 206:2013+A2:2021 Concrete. Specification, performance, production and conformity”. European Committee for Standardization (CEN): Brussels, Belgium, 2013. [Google Scholar]
  17. CEN, “EN 12390-3:2019 Testing hardened concrete. Part 3: Compressive strength of test specimens”. European Committee for Standardization (CEN): Brussels, Belgium, 2019. [Google Scholar]
  18. Custódio, J.; Francinete, P.; Ribeiro, A.; Gonzalez, A. & Silva, E., “Comparison of Sorption Assessment Methods for Superabsorbent Polymers”, in 3rd International Conference on the Application of Superabsorbent Polymers (SAP) and Other New Admixtures Towards Smart Concrete, vol. 24 RILEM Bookseries, Boshoff, W. P., Combrinck, R., Mechtcherine, V. & Wyrzykowski, M. (Eds.). Springer International Publishing: Cham, Switzerland, 2020. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.