EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 357 (2022) MATEC Web Conf., 357 (2022) 05001 References
Open Access
Issue
MATEC Web Conf.
Volume 357, 2022
25th Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2020)
Article Number 05001
Number of page(s) 7
Section Experimental Mechanics, Identification and Validation
DOI https://doi.org/10.1051/matecconf/202235705001
Published online 22 June 2022
  1. M. Sapieta, P. Sulka, M. Svoboda Localization of delamination in composite test specimen. XXII Slovak-Polish Scientific Conference On Machine Modelling And Simulations 2017 (MMS 2017) Book Series: MATEC Web of Conferences, 157, Article Number: 01015 (2018). [Google Scholar]
  2. T. Dodok, N. Cuboňová, I. Kuric Workshop programming as a part of technological preparation of production Advanced in Science and Technology Research Journal 11, 1, 111–116 (2017). [CrossRef] [Google Scholar]
  3. P. Krawiec, G. Domek, Ł. Warguła, K. Waluś, J. Adamiec The application of the optical system ATOS II for rapid prototyping methods of non-classical models of cogbelt pulleys MATEC Web of Conferences, 157, 01010 (2018). [CrossRef] [EDP Sciences] [Google Scholar]
  4. P. Krawiec, A. Marlewski Profile design of noncircular belt pulleys Journal of Theoretical and Applied Mechanics, 54, 2 561–570 (2016). [CrossRef] [Google Scholar]
  5. A. Sapietová, M. Sága, I. Kuric, et al. Application of optimization algorithms for robot systems designing. International Journal of Advanced Robotic Systems 15, 1 (2018). [Google Scholar]
  6. M. Sága, P. Kopas, M. Uhričik Modeling and experimental analysis of the aluminium alloy fatigue damage in the case of bending - torsion loading Procedia Engineering 48, 599–606 (2012). [CrossRef] [Google Scholar]
  7. P. Kopas, M. Blatnický, M. Sága M. Vaško Identification of mechanical properties of weld joints of AlMgSi07.F25 aluminium alloy. Metalurgija 56 (1-2), 99–102 (2017). [Google Scholar]
  8. M. Saga, M. Vasko, Z. Sagova, M. Handrik Effective algorithm for structural optimization subjected to fatigue damage and random excitation Scientific journal of Silesian University of Technology - Series Transport 99, 149–161 (2018). [CrossRef] [Google Scholar]
  9. M. Vaško, M. Blatnický, P. Kopas, M. Sága Research of weld joint fatigue life of the AlMgSi07.F25 aluminium alloy under bending-torsion cyclic loading Metalurgija 56, 1-2, 94–98 (2017). [Google Scholar]
  10. L. Jakubovičová, M. Sága, M. Vaško Numerical study of influence of mutual slewig of roller bearing rings on the principal stresses at contact area Scientific journal of Silesian University of Technology - Series Transport 84, 83–91 (2014). [Google Scholar]
  11. V. Dekýš, A. Sapietová, O. Števka Understanding of the dynamical properties of machines based on the interpretation of spectral measurements and FRF. Conference: 51st International Scientific Conference on Experimental Stress analysis (EAN 2013) Location: Litomerice, Czech Republic Date: Jun 11-13 (2013). [Google Scholar]
  12. A. Sapietová, R. Petrech, M. Petrovič Analysis of the dynamical effects on housing of the axial piston hydromotor Novel Trends In Production Devices And Systems Book Series: Applied Mechanics and Materials, 474, 357–362 (2014). [Google Scholar]
  13. M. Kekez, L. Radziszewski, A. Sapietova Fuel type recognition by classifiers developed with computational intelligence methods using combustion pressure data and the crankshaft angle at which heat release reaches its maximum. 20th International Conference Machine Modeling And Simulations, MMS 2015 Book Series: Procedia Engineering, 136 (2015). [Google Scholar]
  14. O. Stalmach, V. Dekys, P. Novak, M. Sapieta Processing of results from a thermal fem analysis using the lock-in method and comparison with experiment Scientific journal of silesian university of technology-series transport. 104, 159–168 (2019). [CrossRef] [Google Scholar]
  15. V. Dekýš, Z. Stankovičová, P. Novák, O. Stalmach The contribution to the modal analysis using an infrared camera. : MATEC Web of Conferences, 157, 05003 (2018)., [CrossRef] [EDP Sciences] [Google Scholar]
  16. V. Dekys, O. Stalmach, J. Soukup, A. Sapietova, L. Rychlikova Detection of composite damage by IR NDT using ultrasonic and optic excitation. XXIII Polish-Slovak Scientific Conference On Machine Modelling And Simulations (MMS 2018) Book Series: MATEC Web of Conferences, 254, 05004 (2018). [Google Scholar]
  17. M. Sapieta, V. Dekys, P. Pastorek Using of activ thermography and lock-in method with ultrasound exication for detection of material defects Scientific Reports, 7, 1386 (2014). [Google Scholar]
  18. M. Jurkovic, T. Kalina, L. Jancosek, R. Kadnar, P. Gorzelanczyk, K. Jerabek Proposal of Conversion the Tugboat Engines to Diesel - LNG Operation Advances In Science And Technology-Research Journal, 13, 4, 129–142 (2019). [CrossRef] [Google Scholar]
  19. EDEVIS Homepage https://www.edevis.com/content/en/ultrasound_thermography.php. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.