Open Access
| Issue |
MATEC Web Conf.
Volume 357, 2022
25th Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2020)
|
|
|---|---|---|
| Article Number | 03001 | |
| Number of page(s) | 7 | |
| Section | Machine Dynamics and Multibody Systems Simulation | |
| DOI | https://doi.org/10.1051/matecconf/202235703001 | |
| Published online | 22 June 2022 | |
- W. Piekarska, M. Kubiak, M. Vaško Numerical estimation of the shape of weld and heat affected zone in laser-arc hybrid welded joints. Procedia Engineering 177, 114–120 (2017). [CrossRef] [Google Scholar]
- L. Jakubovičová, M. Sága, M. Vaško Numerical study of influence of mutual slewing of roller bearing rings on the principal stresses at contact area. Scientific journal of Silesian University of Technology - Series Transport 84, 83–91 (2014). [Google Scholar]
- P. Kopas, M. Sága, V. Baniari, M. Vaško, M. Handrik A plastic strain and stress analysis of bending and torsion fatigue specimens in the low-cycle fatigue region using the finite element methods. Procedia Engineering 177, 526–531 (2017). [CrossRef] [Google Scholar]
- L. Jakubovicova, M. Vasko, M. Saga, P. Kopas, P. Novak, M. Handrik Design and stress analysis of wheeled compactor construction. MATEC Web of Conferences 254, 1–10 (2019). [Google Scholar]
- D. Barta, J. Dizo, J. Caban Piston kinematics of a combustion engine with unconventional crank mechanism. MATEC Web of Conferences, 244, 1–7 (2018). [Google Scholar]
- J. Vavro, Jr., J. Vavro, P. Kovacikova, R. Bezdedova Kinematic and dynamic analysis of planar mechanisms by means of the Solid Works software. Procedia Engineering 177, 476–481 (2017). [CrossRef] [Google Scholar]
- B. Paul, D. Krajcinovic Computer Analysis of Machines with Planar Motion-Part I: Kinematics., Part II: Dynamics. Journal of Applied Mechanics, 37, 697–712 (1970). [CrossRef] [Google Scholar]
- M.A. Chace, D. Smith DAMN-A Digital Computer Program for the Dynamic Analysis Of Generalized Mechanical Systems. SAE International 80, 2, 969–991 (1971). [Google Scholar]
- P.N. Sheth, J.J. Uicker, Jr. IMP (Integrated Mechanisms Program). A Computer Aided Design Analysis for Mechanisms and Linkages. Journal of Engineering for Industry 94, 454–464 (1972). [CrossRef] [Google Scholar]
- N. Orlandea, M.A. Chace, D.A. Calahan A Sparsity-Oriented Approach to the Dynamic Analysis and Design of Mechanical Systems, Parts I and II. Journal of Engineering for Industry 99, 773–784 (1977). [CrossRef] [Google Scholar]
- R.A. Wehage, E.J. Haug Generalized Coordinate Partitioning for Dimension Reduction in Analysis of Constrained Dynamic Systems. Journal of Mechanical Design, 104, 1, 247–255 (1982). [CrossRef] [Google Scholar]
- I.S. Chung et al. Dynamic Analysis of Three Dimensional Constrained Mechanical Systems Using Euler Parameters. Technical Report 81-11, Center for Computer Aided Design (1981). [Google Scholar]
- J.G. De Jalon, E. Bayo Kinematic and Dynamic Simulation of Multibody Systems. 2. Edn. Springer-Verlag, Springer-Verlag, New York (1993). [Google Scholar]
- E.J. Haug Computer-Aided Kinematics and Dynamics of Mechanical systems. 1. Edn. Allyn and Bacon, Massachusetts (1989). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.