EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 333 (2021) MATEC Web Conf., 333 (2021) 11004 References
Open Access
Issue
MATEC Web Conf.
Volume 333, 2021
The 18th Asian Pacific Confederation of Chemical Engineering Congress (APCChE 2019)
Article Number 11004
Number of page(s) 6
Section Materials Processing and Interface Control
DOI https://doi.org/10.1051/matecconf/202133311004
Published online 08 January 2021
  1. Beng, G.; “UV-curable Encapsulants for LED,” Orient. J. Chem., 28, 1135–1140 (2012) [CrossRef] [Google Scholar]
  2. Chang, M.-H., D. Das, P.V. Varde, and M. Pecht; “Light Emitting Diodes Reliability Review,” Microelectronics Reliability, 52, 762–782 (2012) [CrossRef] [Google Scholar]
  3. Chen, D., W. Xiang, X. Liang, J. Zhong, H. Yu, M. Ding, H. Lu, and Z. Ji; “Advances in Transparent Glass– Ceramic Phosphors for White Light-Emitting Diodes—A Review,” Journal of the European Ceramic Society, 35, 859–869 (2015) [CrossRef] [Google Scholar]
  4. Corcione, C. E., R. Striani, and M. Frigione; “Organic– Inorganic UV-cured Methacrylic-Based Hybrids as Protective Coatings for Different Substrates,” Progress in Organic Coatings, 77, 1117–1125 (2014) [CrossRef] [Google Scholar]
  5. Hara, D.; “Development of Gas Barrier Materials,” Tosoh research & technology review, 57, 39–44 (2013) [Google Scholar]
  6. Hsueh, H.-B., C.-Y. Chen, C.-C. Wang, and T.-J. Chu; “Preparation and Properties of APPSSQ-like/Polyimide Hybrid Composites,” Journal of Applied Polymer Science, 89, 2865–2874 (2003) [CrossRef] [Google Scholar]
  7. Huang, J.-C., Y.-P. Chu, M. Wei, and R. D. Deanin; “Comparison of Epoxy Resins for Applications in LightEmitting Diodes,” Adv. in Polym. Technol., 23, 298–306 (2004) [CrossRef] [Google Scholar]
  8. JIS Z 0208:1976 Testing Methods for Determination of the Water Vapour Transmission. Rate of Moisture −Proof Packaging Materials (Dish Method), JIS (1976) [Google Scholar]
  9. Kanezashi, M.; “Sol–Gel Derived Silica Membranes: Control of Silica Network Size and Hydrothermal Stability,” MEMBRANE, 36, 97–103 (2011) [CrossRef] [Google Scholar]
  10. Kim, J., B. Ma, and K. Lee; “Comparison of Effect of Epoxy and Silicone Adhesive on the Lifetime of Plastic LED Package,” Electronic Materials Letters, 9, 429–432 (2013) [CrossRef] [Google Scholar]
  11. Kim, J.-S., S. C. Yang, and B.-S. Bae; “Thermally Stable Transparent Sol–Gel Based Siloxane Hybrid Materialwith High Refractive Index for Light Emitting Diode (LED) Encapsulation,” Chem. Mater., 22, 3549–3555 (2010) [CrossRef] [Google Scholar]
  12. Kim, S. K., C. Baguenard, and C. A. Guymon; “Influence of Photopolymerization Characteristics on ThermoMechanical Properties of Nanocomposites Utilizing Polymerizable Organoclays in Thiol-Acrylate Systems,” Macromol. Symp., 329, 173–192 (2013) [CrossRef] [Google Scholar]
  13. Kinoshita, Y., H. Ashihara, A. Hashimoto, and K. Kuraoka; “Preparation of Silica/Poly (Vinyl Alcohol) Hybrid Gas Barrier Membrane with Cross-Linked Structure-Effect of Addition of Maleic Acid,” Journal of Packaging Science & Technology, Japan, 20, 35–41 (2010) [Google Scholar]
  14. Li, T., J. Zhang, H. Wang, Z. Hu, and Y. Yu; “HighPerformance Light-Emitting Diodes Encapsulated with Silica-Filled Epoxy Materials,” Appl. Mater. Interfaces, 5, 8968−8981 (2013) [CrossRef] [Google Scholar]
  15. Liang, L., C. Zeng, X. Xiaohui, C. Guolong, Y. Rogqian, Z. Rui, Z. Lei, M. Yu, and Y. Min; “Effects of Oxidation Curing and Sintering Temperature on the Microstructure Formation and Heat Transfer Performance of Freestanding Polymer-Derived SiC Films for High-Power LEDs,” Ceramics International, 44, 6072–6080 (2018) [CrossRef] [Google Scholar]
  16. Liu, H., Z. Wang, and C. Sun; “Robust Water-Repellent Treatment of Cotton Fabrics with Polysiloxane Modified via Thiol-Ene Click Reaction,” Fibers and Polymers, 19, 580–586 (2018) [CrossRef] [Google Scholar]
  17. Luo, X. B., R. Hu, S. Liu, and K. Wang; “Heat and Fluid Flow in High-Power LED Packaging and Applications,” Prog. Energy Combust. Sci., 56, 1–32 (2016) [CrossRef] [Google Scholar]
  18. Matsukawa, K., T. Fukuda, S. Watase, and H. Goda; “Preparation of Photo-curable Thiolene Hybrids and their Application for Optical Materials,” Journal of Photopolymer Science and Technology, 23, 115–119 (2010) [CrossRef] [Google Scholar]
  19. Matsumoto, S., and N. Nakamura; “Glass for LED encapsulation,” NEW GLASS, 27, 11–14 (2012) [Google Scholar]
  20. Minamizaki, Y.; “Adhesives and Adhesion Mechanism,” Journal of Japan Institute of Electronics Packaging, 6, 349–354 (2003) [CrossRef] [Google Scholar]
  21. Okumura, K. and H. Maeshima; “Recent Improvement in the Epoxy Resins for LED Encapsulant,” Journal of the Adhesion Society of Japan, 46, 401–405 (2010) [CrossRef] [Google Scholar]
  22. Okumura, K.; “The Latest Developmental Trend of LED Encapsulants,” Journal of Japan Institute of Electronics Packaging, 14, 175–178 (2011) [CrossRef] [Google Scholar]
  23. Schmidt, H., G. Jonschker, S. Goedicke, and M. Mennig; “The Sol–Gel Process as a Basic Technology for Nanoparticle-Dispersed Inorganic-Organic Composites,” Journal of Sol-Gel Science and Technology, 19, 39–51 (2000) [CrossRef] [Google Scholar]
  24. Schroeder, W. F., I. E. dell´Erba, G. F. Arenas, S. V. Asmussen and C. I. Vallo; “Encapsulants for LightEmitting Diodes from Visible Light-Cured Epoxy Monomers,” Polym. Adv. Technol., 24, 430–436 (2013) [CrossRef] [Google Scholar]
  25. Schubert, E. F. and J. K. Kim; “Solid-State Light Sources Getting Smart,” Science, 308, 1274–1278 (2005) [CrossRef] [PubMed] [Google Scholar]
  26. Shang, X. X., S. Duan, M. Zhang, X. Y. Cao, K. Zheng, J. N. Zhang, Y. M. Ma, and R. B. Zhang; “UV-Curable Ladder-Like Diphenylsiloxane-Bridged MethacrylPhenyl-Siloxane for High Power LED Encapsulation,” RSC Adv., 8, 9049–9056 (2018) [CrossRef] [Google Scholar]
  27. Slocum, A.; A Technology Assessment of Light Emitting Diode (LED) Solid State Lighting for General Illumination, National Center for Environmental Economics (NCEE), Washington, DC (2005) [Google Scholar]
  28. Steranka, F. M., J. Bhat, D. Collins, L. Cook, M. G. Craford, R. Fletcher, N. Gardner, P. Grillot, W. Goetz, M. Keuper, R. Khare, A. Kim, M. Krames, G. Harbers, M. Ludowise, P. S. Martin, M. Misra, G. Mueller, R. Mueller-Mach, S. Rudaz, Y. C. Shen, D. Steigerwald, S. Stockman, S. Subramanya, T. Trotter, and J. J. Wierer; “High Power LEDs––Technology Status and Market Applications,” Phys. Status Solidi a-Appl.Mater. Sci., 194, 380–388 (2002) [CrossRef] [Google Scholar]
  29. Stolyarchuk, N. V., H. Kolev, M. Kanuchova, R. Keller, M. Vaclavikov, and I. V. Melnyk; “Synthesis and Sorption Properties of Bridged Polysilsesquioxane Microparticles Containing 3-Mercaptopropyl Groups in the Surface Layer,” Colloids and Surfaces A, 538, 694–702 (2018) [CrossRef] [Google Scholar]
  30. Yanagisawa, T. and T. Kojima; “Long-Term Accelerated Current Operation of White Light-Emitting Diodes,” Journal of Luminescence, 114, 39–42 (2005) [CrossRef] [Google Scholar]
  31. Yoo, H., Y. Kouhara, H. C. Yoon, S. J. Park, J. H. Oh, and Y. R. Do; “Sn-P-F Containing Glass Matrix for the Fabrication of Phosphor-in-Glass for Use in High Power LEDs,” RSC Adv., 6, 111640–111647 (2016) [CrossRef] [Google Scholar]
  32. Yoshida, M., T. Honda, Y. Uemura, Hatate, Y., and T. Sarata; “Formation of Lead-Free Sealing Glasses in the Quaternary System V2O5-ZnO-BaO-TeO2,” Kagaku Kogaku Ronbunshu, 30, 233–239 (2004) [CrossRef] [Google Scholar]
  33. Zhang, R., H. Lin, Y. Yu, D. Chen, J. Xu, and Y. Wang; “A New-Generation Color Converter for High-Power White LED: Transparent Ce3+: YAG Phosphor-in-Glass,” Laser and Photonics Reviews, 8, 158–164 (2014) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.