EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 307 (2020) MATEC Web Conf., 307 (2020) 01055 References
Open Access
Issue
MATEC Web Conf.
Volume 307, 2020
International Conference on Materials & Energy (ICOME’17 and ICOME’18)
Article Number 01055
Number of page(s) 8
DOI https://doi.org/10.1051/matecconf/202030701055
Published online 10 February 2020
  1. Maydanik Y.F., Pastukhov V.G., Chernysheva M.A. Development and Investigation of a Miniature Copper-Acetone Loop Heat Pipe with a Flat Evapourator [J]. Journal of Electronics Cooling & Thermal Control, 2015, 05(4):77-88. [CrossRef] [Google Scholar]
  2. Yang Y, Zhu K, Wang Y, et al. Experimental investigation and visual observation of a vapour–liquid separated flat loop heat pipe evapourator [J]. Applied Thermal Engineering, 2016, 101:71-78. [Google Scholar]
  3. Singh R, Nguyen T, Mochizuki M. Capillary evapourator development and qualification for loop heat pipes[J]. Applied Thermal Engineering, 2014, 63(1):406-418. [CrossRef] [Google Scholar]
  4. Vasiliev, L, Lossouarn, D., Romestant, C., et al. Loop heat pipe for cooling of high-power electronic components, International Journal of Heat and Mass Transfer (2008), volume 52, Issues 1-2, 15 January 2009, pp. 301-308 [Google Scholar]
  5. Liu Z, Wang D, Jiang C, et al. Experimental study on loop heat pipe with two-wick flat evapourator[J]. International Journal of Thermal Sciences, 2015, 94:9-17. [CrossRef] [Google Scholar]
  6. Yu.F. Gerasimov, Yu.F. Maydanik, V.M. Kiseev, et al. Evapouration Chamber of a Heat Pipe, USSR Inventor Certificate 495522, 1975. [Google Scholar]
  7. Kiseev V.M., Vlassov V.V., Muraoka I. Experimental optimization of capillary structures for loop heat pipes and heat switches [J]. Applied Thermal Engineering, 2010, 30(11): 1312-1319. [CrossRef] [Google Scholar]
  8. Crepinsek M, Park C. Experimental analysis of pump-assisted and capillary-driven dual-evapourators two-phase cooling loop [J].Applied Thermal Engineering, 2012, 38: 133-142. [Google Scholar]
  9. Ren C, Wu Q.S., Hu M.B. Heat transfer with flow and evapouration in loop heat pipe’s wick at low or moderate heat fluxes [J]. International Journal of Heat and Mass Transfer, 2007, 50(11): 2296-2308. [CrossRef] [Google Scholar]
  10. Siedel B, Sartre V, Lefèvre F. Numerical investigation of the thermo-hydraulic behavior of a complete loop heat pipe [J]. Applied Thermal Engineering, 2013, 61(2): 541-553. [CrossRef] [Google Scholar]
  11. Yeh C.C., Liu B.H., Chen Y.M.. A study of loop heat pipe with bi-porous wicks [J]. Heat and Mass Transfer, 2008, 44(12): 1537-1547. [CrossRef] [Google Scholar]
  12. Boo J.H., Chung W.B.. Experimental study on the thermal performance of a small-scale loop heat pipe with polypropylene wick [J]. Journal of mechanical science and technology, 2005, 19(4): 1052-1061. [CrossRef] [Google Scholar]
  13. Liu Z, Gai D, Li H, et al. Investigation of impact of different working fluids on the operational characteristics of miniature LHP with flat evapourator[J]. Applied Thermal Engineering, 2011, 31(16): 3387-3392. [CrossRef] [Google Scholar]
  14. Joung W, Yu T, Lee J. Experimental study on the loop heat pipe with a planar bifacial wick structure [J]. International Journal of Heat and Mass Transfer, 2008, 51(7): 1573-1581. [CrossRef] [Google Scholar]
  15. V.M. Kiseev, A.S. Nepomnyashy, N.L. Gruzdova, K.S. Kim. Miniature loop heatpipes for CPU cooling, in: Proceedings of the 7th International Heat Pipe Symposium, Jeju, Korea, 2003, pp. 175e180. [Google Scholar]
  16. Singh R, Akbarzadeh A, Mochizuki M. Operational characteristics of a miniature loop heat pipe with flat evapourator [J]. International Journal of Thermal Sciences, 2008, 47(11): 1504-1515. [CrossRef] [Google Scholar]
  17. Li J, Wang D, Peterson G.P.. Experimental studies on a high performance compact loop heat pipe with a square flat evapourator[J]. Applied Thermal Engineering, 2010, 30(6): 741-752. [CrossRef] [Google Scholar]
  18. Wang S, Zhang W, Zhang X, et al. Study on start-up characteristics of loop heat pipe under low-power [J]. International Journal of Heat and Mass Transfer, 2011, 54(4): 1002-1007. [CrossRef] [Google Scholar]
  19. Deeney, J. "Thermal Modeling and Measurement of High Power Silicon Devices with Asymmetric Power Distribution," Proc of 35th IMAPS International Symposium on Microelectronics, 2002 [Google Scholar]
  20. Prasher R. A Simplified Conduction Based Modeling Scheme for Design Sensitivity Study of Thermal Solution Utilizing Heat Pipe and Vapour Chamber Technology [J]. Electronic Packaging, Vol. 125, pp. 378-385, 2003 [CrossRef] [Google Scholar]
  21. Xu, G., Follmer, L., Cooley J., et al. Thermal solution development for the Sun FireTM E25K server, Proceedings of SEMI-THERM 21 (2005), San Jose, USA [Google Scholar]
  22. Randeep Singh, Thang Nguyen, Masataka Mochizuki. Capillary evapourator development and qualification for loop heat pipes [J]. Applied Thermal Engineering. 2014. 63(1): 406-418 [CrossRef] [Google Scholar]
  23. S. Becker, S. Vershinin, V. Sartreet al. Steady state operation of a copper–water LHP with a flat-oval evapourator[J]. Applied Thermal Engineering. 2011. 31(5): 686-695 [CrossRef] [Google Scholar]
  24. Maydanik Y.F., Chernysheva M.A., Pastukhov V.G.. Review: Loop heat pipes with flat evapourators [J].Applied Thermal Engineering, 2014, 67(1): 294-307. [CrossRef] [Google Scholar]
  25. J. Ku, D.M. Douglas, Michael Pauken, Miniature Loop Heat Pipe with Multiple Evapourators for Thermal Control of Small Spacecraft, N.G.S.F. Center, Editor. 2004 [Google Scholar]
  26. H. Nagano, J. Ku, Capillary limit of a multiple-evapourator and multiple-condenser miniature loop heat pipe [J]. Journal of Thermo-physics and Heat Transfer, 2007. 21(4), pp. 694 [CrossRef] [Google Scholar]
  27. Yu.F. Gerasimov, Yu.F. Maydanik, G.T. Shchogolev, et.al. Low-temperature heat pipes with separate channels for vapour and liquid, Eng.-Phys. J. 28 (6) (1975) 957–960 (in Russian). [Google Scholar]
  28. Singh R, Nguyen T, Mochizuki M. Capillary evapourator development and qualification for loop heat pipes [J]. Applied Thermal Engineering, 2014, 63(1): 406-418. [CrossRef] [Google Scholar]
  29. X.H. Nguyen, B.H. Sung, J. Choi, et al. Study on heat transfer performance for loop heat pipe with circular flat evapourator, Int. J. Heat Mass Transfer 55 (4) (2012) 1304e1315. [CrossRef] [Google Scholar]
  30. Xu J, Zhang L, Xu H. Performance of LHPs with a novel design evapourator [J]. International Journal of Heat and Mass Transfer, 2012, 55(23): 7005-7014. [CrossRef] [Google Scholar]
  31. Xu J, Zhang L, Xu H. Experimental investigation and visual observation of loop heat pipes with two-layer composite wicks [J]. International Journal of Heat and Mass Transfer, 2014, 72: 378-387 [CrossRef] [Google Scholar]
  32. Singh R, Akbarzadeh A, Mochizuki M. Operational characteristics of a miniature loop heat pipe with flat evapourator [J]. International Journal of Thermal Sciences, 2008, 47(11): 1504-1515. [CrossRef] [Google Scholar]
  33. Singh R, Akbarzadeh A, Dixon C, et al. Novel design of a miniature loop heat pipe evapourator for electronic cooling [J]. Journal of Heat Transfer, 2007, 129(10): 1445-1452 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.