Open Access
Issue
MATEC Web Conf.
Volume 292, 2019
23rd International Conference on Circuits, Systems, Communications and Computers (CSCC 2019)
Article Number 01009
Number of page(s) 5
Section Circuits and Systems
DOI https://doi.org/10.1051/matecconf/201929201009
Published online 24 September 2019
  1. Type certificate data sheet no. 3a19, http://www.airweb.faa.gov/Regulatory_and_Guidance_Library/rgMakeModel.nsf/0/9145d78f43cafe5e8625724300634b5e/$FILE/3a19.pdf [Google Scholar]
  2. M. Hinz, Concept for Machine Learning and Field Data Driven Adjustment of Testing Conditions of Technical Prototypes, Berichte aus der Zuverläs-sigkeitsanalytik und Risikoforschung (Shaker Verlag, 2018), ISBN 9783844060225 [Google Scholar]
  3. Instrukcja obsługi technicznej samolotu cessna 150l, http://www.aeroklub2.home.pl/pliki/cessna150l.pdf [Google Scholar]
  4. M. Hinz, F. Hienzsch, S. Bracke, Detection of Distinctions in Car Fleets Based on Measured and Simulated Data, in RAMS 2017 – 63rd Annual Reliability and Maintainability Symposium (Orlando, Florida, U.S.A., 2017) [Google Scholar]
  5. M. Koucky, D. Valis, Reliability of sequential systems with a restricted number of renewals, in Proceedings and Monographs in Engineering, Water and Earth Sciences 2007, edited by T. Aven, J.E. Vinnem (Stavanger, Norway, 2007), pp. 1845–1849 [Google Scholar]
  6. C.A. Company, 150 series 1969 thru 1976 service manual, https://www.redskyventures.org/doc/cessna-maintenance-manuals/Cessna_150_1969-1976_MM_D971-3-13.pdf [Google Scholar]
  7. Vališ, D. and Žák, L. and Pokora, O., Failure prediction of diesel engine based on occurrence of selected wear particles in oil, in Engineering Failure Analysis (2015), Vol. 56, pp. 501 – 511, the Sixth International Conference on Engineering Failure Analysis [CrossRef] [Google Scholar]
  8. A.V. Kozyrev, V.Y. Kozhevnikov, N.S. Semeniuk, L.A. Zyulkova, Theoretical Simulation of a Gas Breakdown Initiated by External Plasma Source in the Gap With Combined Metal-Dielectric Electrodes, in IEEE Transactions on Plasma Science (2015), Vol. 43, No. 8, pp. 2294–2298, ISSN 0093-3813 [CrossRef] [Google Scholar]
  9. Z. Vintr, D. Valis, Modeling and Analysis of the Reliability of Systems with One-shot Items, in 2007 Annual Reliability and Maintainability Symposium (2007), pp. 380–385, ISSN 0149-144X [CrossRef] [Google Scholar]
  10. A. Kalinska, A. Wojcik, J. Slosarz, B. Kruzinska, M. Michalczuk, S. Jaworski, M. Wierzbicki, M. Golebiewski, Occurrence and aetiology of Staphylococcal mastitis a review, in Animal Science Papers and Reports (2018), Vol. 36, No. 3, pp. 263– 273 [Google Scholar]
  11. D. Valis, Z. Vintr, Dependability of mechatronics systems in military vehicle design, in Proceedings and Monographs in Engineering, Water and Earth Sciences, SAFETY AND RELIABILITY FOR MANAGING RISK, European Safety and Reliability Conference (ESREL 2006) (Estoril, PORTUGAL, 2006), Vol. 1-3, pp. 1703–1707 [Google Scholar]
  12. B. Babiarz, Aspects of Heat Supply Security Management Using Elements of Decision Theory, in Energies (2018), Vol. 11, No. 10, pp. 1–14, article Number: 2764 [CrossRef] [Google Scholar]
  13. Z. Vintr, D. Valis, A Tool for Decision Making in K-Out-of-N System Maintenance, in Mechanical and Aerospace Engineering, ICMAE2011 (Trans Tech Publications, 2012), Vol. 110 of Applied Mechanics and Materials, pp. 5257–5264 [Google Scholar]
  14. V.Y. Kozhevnikov, A.V. Kozyrev, N.S. Semeniuk, A.V. Batrakov, V.M. Karaban, D.S. Kosov, Design and diagnostics of arc-resistant electronics for satellite telecommunication systems, in 2016 18th Mediterranean Electrotechnical Conference (MELE-CON) (2016), pp. 1–5 [Google Scholar]
  15. A. Mueller, M. Hinz, S. Bracke, Optimization of the dental implant testing based on FEM simulation of fatigue and accelerated life, in Risk, Reliability and Safety: Innovating Theory and Practice (Glasgow, Scotland, 2017), pp. 16–22, ESREL 2017 [Google Scholar]
  16. F. Grabski, Semi-Markov Processes: Applications in System Reliability and Maintenance (Elsevier Science, 2014), ISBN 9780128005187 [Google Scholar]
  17. F. Maturo, S. Hošková-Mayerová, Fuzzy regression models and alternative operations for economics and social sciences, in Recent Trends in Social Systems: Quantitative Theories and Qualitative Models (2017), Vol. 66 of Studies in Systems, Decision and Control, pp. 235–247 [Google Scholar]
  18. L. Hyncˇík, T. Bon´kowski, J. Vychytil, Virtual hybrid human body model for PTW safety assessment, in Applied and Computational Mechanics (2017), Vol. 11, No. 2, p. 137–144 [Google Scholar]
  19. D. Valis, L. Zak, O. Pokora, Engine residual technical life estimation based on tribo data, in Eksploatacja i Niezawodnosc - Maintenance and Reliability (2014), Vol. 16, No. 2, pp. 203–210 [Google Scholar]
  20. V.Y. Kozhevnikov, N. Semeniuk, A.V. Kozyrev, V.M. Karaban, D.S. Kosov, Novel automated software system for arcing simulation in spacecraft on-board electronics, in 2017 2nd International Conference on System Reliability and Safety (ICSRS) (2017), pp. 469–473 [CrossRef] [Google Scholar]
  21. B. Babiarz, Heat supply system reliability management, in Safety and Reliability: Methodology and Applications. Proc. of the European Safety and Reliability Conference, ESREL 2014, edited by e.a. Tomasz Nowakowski (CRC Press, 2015), pp. 513–520 [Google Scholar]
  22. L. Hyncˇík, T. Bon´kowski, W. Lv, Development of a simple motorcyclist helmet finite element model, in International Journal of Vehicle Safety (2018), Vol. 10, No. 3/4, p. 277–287 [CrossRef] [Google Scholar]
  23. S. Hošková-Mayerová, Education and Training in Crisis Management, in The European Proceedings of SocialBehavioural Sciences EpSBS (2016), Vol. XVI, pp. 849–856 [CrossRef] [Google Scholar]
  24. W. Lv, L. Hyncik, T. Bonkowski, Rider Stature Influence to Injury Risk in Motorcycle Rear Impact to Car, in Asia-Pacific Automotive Engineering Conference (SAE International, 2019), ISSN 0148-7191, https://doi.org/10.4271/2019-01-1436 [Google Scholar]
  25. B. Babiarz, P. Kut, District heating simulation in the aspect of heat supply safety, in VI International Conference of Science and Technology INFRAEKO 2018. Modern cities. Infrastructure and Environmental (2018), Cracov, E3S Web of Conferences 45, 00005 [Google Scholar]
  26. R. Urban, S. Hošková-Mayerová, Threat Life Cycle and Its Dynamics, in Deturope (2017), Vol. 9, pp. 93–109 [Google Scholar]
  27. M. Adamski, W. Lorenc, J. Cwiklak, Vertical take off reconnaissance Unmanned Air Vehicle, in 2014 IEEE Chinese Guidance, Navigation and Control Conference (CGNCC) (2014), pp. 986–990 [Google Scholar]
  28. R. Ocaña-Rilola, Two Methods To Estimate Homogenous Markov Processes, in Journal of Modern Applied Statistical Methods (2002), Vol. 1, No. 1, pp. 131–138, article 17 [CrossRef] [Google Scholar]
  29. J. Gajewski, D. Valis, The determination of combustion engine condition and reliability using oil analysis by MLP and RBF neural networks, in Tribology International (2017), Vol. 115, p. 557–572 [CrossRef] [Google Scholar]
  30. D. Tloczynski, Air Transport Service in Academic Research at Polish Airports, in Advances in Intelligent Systems and Computing, edited by G. Sierpinski (Katowice, Poland, 2017), Vol. 505, pp. 23–32, conference: 13th Scientific and Technical Conference on Transport Systems. Theory and Practice [CrossRef] [Google Scholar]
  31. B. Babiarz, Resilience to hazards in district heating systems, in Safety and Reliability of Complex Engineered Systems: ESREL 2015, edited by e.a. Luca Podofillini (CRC Press/Balkema, 2015), pp. 2525–2531 [CrossRef] [Google Scholar]
  32. S. Bracke, M. Hinz, M. Inoue, E. Patelli, S. Kutz, H. Gottschalk, B. Ulutas, C. Hartl, P. Moers, P. Bonnaud, Reliability engineering in face of shorten product life cycles: Challenges, technique trends and method approaches to ensure product reliability, in Risk, Reliability and Safety: Innovating Theory and Practice, edited by Walls, L and Revie, M and Bedford, T (Glasgow, Scotland, 2017), pp. 2884–2891, ESREL 2017 [Google Scholar]
  33. D. Tloczynski, Security as a determinant of choice of air transport service and air carrier on the basis of research, in Scientific Journal of Silesian University of Technology-Series Transport (2017), Vol. 95, pp. 213–222 [CrossRef] [Google Scholar]
  34. M. Hinz, F. Hienzsch, S. Bracke, Development of two methods for the characterisation of an automotive fleet behaviour based on the simulation of single car rides, in Risk, Reliability and Safety: Innovating Theory and Practice, edited by Walls, L and Revie, M and Bedford, T (Glasgow, Scotland, 2017), pp. 1593–1598, ESREL 2017 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.