Open Access
Issue |
MATEC Web Conf.
Volume 278, 2019
2018 2nd International Conference on Building Materials and Materials Engineering (ICBMM 2018)
|
|
---|---|---|
Article Number | 01002 | |
Number of page(s) | 5 | |
Section | Building Materials and Applications | |
DOI | https://doi.org/10.1051/matecconf/201927801002 | |
Published online | 08 April 2019 |
- Takashi Sakuma, Shigeyuki Date, Shozaki Masunori: Study on crack prevention effect of low expansion type expansion material, Concrete engineering Vol.26, No. 1, (2004) [Google Scholar]
- Kazuo Togawa et al.: Influence of temperature on restraint expansion characteristics of expanded concrete, Report of JSCE papers, Vol.1962, No.321, pp.177-187, (1982). (5) in japanese [Google Scholar]
- Jun Isogai: Influence of Expansive Material on Concrete, Concrete Engineering, Vol. 19, No. 11, pp. 80-84, (1981) in japanese Figure 7. Restraint expansion by maximum curing temperature. [CrossRef] [Google Scholar]
- Kosuke Kobayashi Toshihiro Ito Expansion factors of cement pressure Civil engineering PapersReport No. 228 (1974) in Japanese [Google Scholar]
- A. Klein, T. Karby and M. Polivka: ACI Journal, July, (1961), pp. 59-82 [Google Scholar]
- V. Bertero and M. Polivka: Proccingings, ASTM, Vol. 64, (1964), 719 [Google Scholar]
- Nagakita et al.: Semet Technology Annual Report, No. 24, (1970) [Google Scholar]
- A. Bentur, M. Ish-Shalom, Properties of type K expansive cement ofpure components II. Proposed mechanism of ettringite formation andexpansion in unrestrained paste of pure expansive component, Cementand concrete research, Vol. 4, pp. 709-721, (1974) [CrossRef] [Google Scholar]
- Takayuki Higuchi, Morioka, Etsuro Sakai, Masami Ohmen: Influence of Expiration Mixing Timing on Expansion Behavior of Cement Paste Mixed with Expanding Material, Cement-Concrete Paper Types, No. 54, pp. 105 - 110, (2000) in japanese [Google Scholar]
- Takayuki Higuchi, Morioka, Etsuro Sakai, Masami Ohmen: Influence of Expiration Mixing Timing on Expansion Behavior of Cement Paste Mixed with Expanding Material, Cement-Concrete Paper Types, No. 54, pp. 105 - 110, (2000) in japanese [Google Scholar]
- Morioka Minoru, Hagiwara Hirotoshi, Sakai Etsuro, Daimon Masami Expansion characteristics and strength development of mortar mixed with expansion materials with different composition and particle size [Google Scholar]
- “Materials” (J. Soc. Mat. Sci., Japan), Vol. 48, No. 8, pp. 848-852, Aug. (1999) in japanese [CrossRef] [Google Scholar]
- Akihiro Yuri, Toshiyuki Tamaki, Hiroyasu Hagiwara Study on compensation of mortar's self-contraction by mixing expansion materials “Materials” (J. Soc. Mat. Sci., Japan), Vol.49, No. 10, pp. 1103-1108, Oct. (2000) in japanese [CrossRef] [Google Scholar]
- A. MATSUNAGA, T. OHNISHI and I. KUROKAWA, The 48th Annual Meeting of JCA, p. 218 (1994). In japanese [Google Scholar]
- E. Tazawa, S. Miyazawa, 9th International Congress on the Chemistry of Cement, IV, p. 712 (1992). In japanese [Google Scholar]
- Eiichi Tazawa, Shingo Miyazawa, Tsuyoshi Sato, Kenjiro Konishi, Annual report of concrete engineering papers, Vol.14, No. 1, p. 561 (1992). In japanese [Google Scholar]
- Takayuki Higuchi, Masataka Eguchi, Makoto Morioka, Etsuro Sakai [Google Scholar]
- Physical properties and cavitation structure of cement hardened material incorporating expanded material subjected to high temperature carbonation treatment under different conditions Cement Science and Concrete Technology, Vol. 68 in japanese [Google Scholar]
- Naotaka Kondo et al: Hydration reaction and expansion mechanism of cement mixed with cementitious expansion material, Concrete engineering annual paper, Vol. 22, No. 2, pp. 25 - 30 (2000) in japanese [Google Scholar]
- Kenji Yamamoto et al.: Expansion mechanism of cement mixed with expansion material, papers of Concrete Engineering, No. 14, pp. 23 - 31 (2003) in japanese [Google Scholar]
- T. Higuchi, et al. Hydration and properties of expansive additive treated high temperature carbonation, Cement and Concrete Reserch, Vol.64, pp.11-16 2014 in japanese [CrossRef] [Google Scholar]
- M. Morioka, E. Sakai, M. Daimon Influence of preparation method on performance of expansive additive containing free-lime, hauyne and anhydrite Concr. Res. Technol., 14 (2003), pp. 43-50 [Google Scholar]
- M. Morioka, T. Higuchi, Y. Nakashima, M. Eguchi, E. Sakai, M. Daimon Characteristics of expansive additives in the system of free lime-hydraulic compounds-anhydrite J. Soc. Inorg. Mater. Jpn., 10 (2003), pp. 225-232 in japanese [Google Scholar]
- T. Higuchi, R. Yoshino, M. Morioka [Google Scholar]
- Effects of the types of shrinkage reducers on the physical properties of mortar mixed with expansive additives [Google Scholar]
- Cement Sci. Concr. Technol., 65 (2011), pp. 196-202 in japanese [CrossRef] [Google Scholar]
- G. Le Saoût, B. Lothenbach, A. Hori, T. Higuchi, F. Winnefeld [Google Scholar]
- Hydration of Portland cement with additions of calcium sulfoaluminates Cem. Concr. Res., 43 (2013), pp. 81-94 in japanes [CrossRef] [Google Scholar]
- K. Suzuki, T. Horiuchi, T. Osaki, T. Sugiyama, M. Horio, S. Tomura [Google Scholar]
- Separation of CO2 at high temperature using MgO and CaO [Google Scholar]
- 69th National Meeting of the Chemical Society of Japan, 2 (1995), p. 1197 in japanese [Google Scholar]
- T. Higuchi, R. Yoshino, M. Morioka [Google Scholar]
- Effects of the types of shrinkage reducers on the physical properties of mortar mixed with expansive additives [Google Scholar]
- Cement Sci. Concr. Technol., 65 (2011), pp. 196-202 in japanese [CrossRef] [Google Scholar]
- Kentaro Kuwahara Yuji Tadoku Hideaki Hisakazawa Koichiro Tsuji A Study on Ultimate Value of Tensile Strain of Expanded Concrete Concrete Engineering Annual Proceedings, Vol. 34, No. 1, (2012) in japanese [Google Scholar]
- T. Maruyama, N. Nakajima, S. Hashimoto, S. Date: A Study on the Initial Strength Development of Precast Concrete, Annual Concrete Engineering Proceedings, Vol. 38, No. 2, pp. 577-582, (2016) in japanese [Google Scholar]
- T. Maruyama, K. Hirabe, N. Nakajima, S. Date: Influence of high temperature steam curing and early demolding on expanded concrete, Annual Concrete Engineering Proceedings, Vol. 39, No. 2, pp. 367-372, (2017).7 in japanese [Google Scholar]
- T. Maruyama, K. Hirabe, N. Nakajima, S. Date: Influence of steam curing and blast furnace slag fine powder on expanding material, next generation precast construction technology study group, PCT 1-8, (2017).12 in japanese [Google Scholar]
- T. Maruyama, N. Nakajima, S. Hashimoto, S. Date, PREDICTING THE EARLY STRENGTH DEVELOPMENT CHARACTERISTICS OF PRECAST CONCRETE PRODUCTS, ARPN Journal of Engineering and Applied Sciences, Vol.12, No.8, pp.2715-2719, (2017).4 in japanese [Google Scholar]
- T. Maruyama, H. Karasawa, S. Date, Effect of Type of Cement and Expansive Agent on the Hardening of Steam-Cured Concrete, Key Engineering Materials, Vol. 744, No.4, pp.105-113, (2017).7 in japanese [CrossRef] [Google Scholar]
- N. Nakajima, K. Hirabe, S. Hashimoto, S. Date, Effect of Curing Conditions and Addition of Fine Blast Furnace Slag Powder on the Initial Performance of Concrete Using Expanding Material, IOP Conference Series: Materials Science and Engineering (ISSN:1757-899X), Vol.246, conference1, 012011, (2017).10 in japanese [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.