Open Access
MATEC Web Conf.
Volume 278, 2019
2018 2nd International Conference on Building Materials and Materials Engineering (ICBMM 2018)
Article Number 01001
Number of page(s) 6
Section Building Materials and Applications
Published online 08 April 2019
  1. C. Vipulanandan, in Proceedings of Geo-Logan '97 conf., GSP 66, ASCE 337 (1997). [Google Scholar]
  2. N. P. Gil, Constr. Repair 10, 24-26 (1996). [Google Scholar]
  3. M. Mollamahmutoǧlu and E. Avci, KSCE J. Civ. Eng. 19, 2041-2050 (2015). [CrossRef] [Google Scholar]
  4. W. J. Clarke and A. C. McNally, in Proceedings of Low Permeability Reservoirs Symposium and Exhibition, Society of Petroleum Engineers 291-298 (1993). [Google Scholar]
  5. D. MacEachern and S. C. Young, Oil Gas J. 90, 49-51 (1992). [Google Scholar]
  6. E. Samari, D. L. T. Scott and D. Dalrymple, in Proceedings of 11th Symposium on Improved Oil Recovery, Part 2, Society of Petroleum Engineers 153-159 (1998). [Google Scholar]
  7. K. L. Harris and B. J. Johnson, presented at the SPE Mid-Continent Gas Symposium, Amarillo, Texas, (1992). [Google Scholar]
  8. K. H. Khayat, G. Ballivy and M. Gaudreault, Can. J. Civ. Eng. 24, 405-418 (1997). [CrossRef] [Google Scholar]
  9. J. Gołaszewski and J. Szwabowski, Cem. Concr. Res. 34, 235-248 (2004). [CrossRef] [Google Scholar]
  10. S. Nagataki and H. Gomi, Cem. Concr. Compos. 20, 163-170 (1998). [CrossRef] [Google Scholar]
  11. D. P. Bentz, M. R. Geiker and K. K. Hansen, Cem. Concr. Res. 31, 1075-1085 (2001). [CrossRef] [Google Scholar]
  12. B. Lothenbach, K. Scrivener and R. D. Hooton, Cem. Concr. Res. 41, 1244-1256 (2011). [CrossRef] [Google Scholar]
  13. M. C. G. Juenger and R. Siddique, Cem. Concr. Res. 78, 71-80 (2015). [CrossRef] [Google Scholar]
  14. Cement. Composition, specifications and conformity criteria for common cements, European Committee for Standardization, BS EN 197-1 (2011). [Google Scholar]
  15. D. Nagrockiene, I. Pundienė and A. Kicaite, Constr. Build. Mater. 45, 324-331 (2013). [CrossRef] [Google Scholar]
  16. Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling, Deutsches Institut für Normung e. V., EN 934-2 (2012). [Google Scholar]
  17. Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table), Deutsches Institut für Normung e. V., DIN EN 1015-3 (2007). [Google Scholar]
  18. R. Vogel, Concr. Plant + Concr. Technol. BFT01/2008, 124-126 (2008). [Google Scholar]
  19. Methods of testing cement - Part 1: Determination of strength, European Committee for Standardization, BS EN 196-1 (2005). [Google Scholar]
  20. Products and systems for the protection and repair of concrete structures test methods Part 4: Determination of shrinkage and expansion, Deutsches Institut für Normung e. V., DIN EN 12617-4 (2002). [Google Scholar]
  21. H. B. Bey, J. Hot, R. Baumann and N. Roussel, Cem. Concr. Compos. 54, 17-20 (2014). [CrossRef] [Google Scholar]
  22. K. H. Khayat, Cem. Concr. Compos. 20, 171-188 (1998). [CrossRef] [Google Scholar]
  23. T. Kawai and T. Okada, ACI Spec. Pub. 119, 583-604 (1989). [Google Scholar]
  24. S. Kubens, Interaction of cement and admixtures and its influence on rheological properties Göttingen: Cuvillier Verlag, (2010). [Google Scholar]
  25. A. Wang, C. Zhang and W. Sun, Cem. Concr. Res. 33, 2023-2029 (2003). [CrossRef] [Google Scholar]
  26. A. Allahverdi and S. Salem, Ceram.-Silikáty 54, 65-71 (2010). [Google Scholar]
  27. M. Collepardi, A. Borsoi, S. Collepardi, J. J. Ogoumah Olagot and R. Troli, Cem. Concr. Compos. 27, 704-708 (2005). [Google Scholar]
  28. A. B. Ribeiro, A. Gonçalves and A. Carrajola, Mater. Struct. 39, 179-187 (2006). [CrossRef] [Google Scholar]
  29. N. S. Berke, L. Li, M. C. Hicks and J. Bae, ACI Spec. Pub. 217, 37-50 (2003). [Google Scholar]
  30. K.-B. Park, in Proceedings of The third international research seminar, eds. B. Persson and G. Fagerlund, Lund University 93-101 (2002). [Google Scholar]
  31. B. Persson, Mater. Struct. 30, 293-305 (1997). [CrossRef] [Google Scholar]
  32. E.-i. Tazawa, S. Miyazawa and T. Kasai, Cem. Concr. Res. 25, 288-292 (1995). [CrossRef] [Google Scholar]
  33. S.-H. Kang, S.-G. Hong and J. Moon, Cem. Concr. Res. 108, 20-30 (2018). [CrossRef] [Google Scholar]
  34. P. Lura, O. M. Jensen and K. v. Breugel, in Proceedings of The third international research seminar, eds. B. Persson and G. Fagerlund, Lund University 127-137 (2002). [Google Scholar]
  35. P. Lura, O. M. Jensen and K. van Breugel, Cem. Concr. Res. 33, 223-232 (2003). [CrossRef] [Google Scholar]
  36. J. Hogancamp and Z. Grasley, Cem. Concr. Compos. 83, 405-414 (2017). [CrossRef] [Google Scholar]
  37. S. Li, F. Sha, R. Liu, Q. Zhang and Z. Li, Constr. Build. Mater. 153, 965-974 (2017). [CrossRef] [Google Scholar]
  38. D. P. Bentz, E. J. Garboczi, C. J. Haecker and O. M. Jensen, Cem. Concr. Res. 29, 1663-1671 (1999). [CrossRef] [Google Scholar]
  39. M. H. Zhang, C. T. Tam and M. P. Leow, Cem. Concr. Res. 33, 1687-1694 (2003). [CrossRef] [Google Scholar]
  40. L. Wu, N. Farzadnia, C. Shi, Z. Zhang and H. Wang, Constr. Build. Mater. 149, 62-75 (2017). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.