Open Access
Issue |
MATEC Web Conf.
Volume 276, 2019
International Conference on Advances in Civil and Environmental Engineering (ICAnCEE 2018)
|
|
---|---|---|
Article Number | 03004 | |
Number of page(s) | 13 | |
Section | Highway and Transportation Engineering | |
DOI | https://doi.org/10.1051/matecconf/201927603004 | |
Published online | 15 March 2019 |
- C. Yang, J. Xie, X. Zhou, Q. Liu, L. Pang, Materials (Basel) 11, 5 (2018) [Google Scholar]
- J.G. Speight, Asphalt materials science and technology (Butterworth-Heinemann, Oxford, 2016) [Google Scholar]
- J. Zak, J. Vavficka, Proc. of the Transcom 2011 (2011) [Google Scholar]
- J.R. Mattos, W.P. Nunez, J.A. Ceratti, A. Zingano, W. Fedrigo, Proc. of the 6th Eurasphalt Eurobitume Congress (2016) [Google Scholar]
- K. Su, L. Sun, Y. Hachiya, R. Maekawa, Proc. of the 6th ICPT (2008) [Google Scholar]
- J. Zhu, B. Birgisson, N. Kringos, Eur. Polym. J. 54 (2014) [Google Scholar]
- J. Read, R.N. Hunter, A. Self, The shell bitumen handbook (Thomas Telford, London, 2015) [Google Scholar]
- L.H. Lewandowski, Rubber Chem. Tech. 67 (1994) [Google Scholar]
- Y. Yildirim, Con. Build. Mat. 21 (2007) [Google Scholar]
- R. Dongre, J. D’Angelo, G. Reinke, A. Shenoy, Transp. Res. Rec. (2004) [Google Scholar]
- AASHTO, Standard Specification for Performance-Graded Asphalt Binder M320-16 (American Association of State Highway and Transportation Officials, Washington D.C., 2016) [Google Scholar]
- H.U. Bahia, D.I. Hanson, M. Zeng, H. Zhai, M.A. Khatri, R.M. Anderson, Characterization of modified asphalt binders in superpave mix design (Natl. Coop. Highw. Res. Progr. 2001) [Google Scholar]
- A. Shenoy, J. Transp. Eng. 127 (2001) [Google Scholar]
- M. Bouldin, R. Dongre, J. D’Angelo, Transp. Res. Rec. 1766 (2001) [Google Scholar]
- AASHTO, Standard Specification for Performance-graded Asphalt Binder using Multiple Stress Creep Recovery (MSCR) Test M332-14 (American Association of State Highway and Transportation Officials, Washington D.C., 2014) [Google Scholar]
- AASHTO, Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) T350-14 (American Association of State Highway and Transportation Officials, Washington D.C., 2014) [Google Scholar]
- J. Zhang, L.F. Walubita, A.N.M. Faruk, P. Karki, G.S. Simate, Con. Build. Mat. 94 (2015) O.-V. Laukkanen, H. Soenen, T. Pellinen, S. Heyrman, G. Lemoine, Mater. Struct. 48 (2015) [Google Scholar]
- J.A. D’Angelo, Development of a performance based binder specification for rutting using creep and recovery testing (University of Calgary, Calgary, 2009) [Google Scholar]
- J.A. D’Angelo, R.Q. Kluttz, R. Dongre, K. Stephens, J. Assoc. Asph. Paving Tech. 76 (2007) [Google Scholar]
- A.P. Duenas, A.P. Lepe, E.M. Martinez, V.C. Ibanez, Proc. of the 5th Eurasphalt Eurobitume Congress E&E2012 (2012) [Google Scholar]
- C. Robertus, R. Van Rooijen, L. Thimm, Proc.of the 5th Eurasphalt Eurobitume Congress E&E2012 (2012) [Google Scholar]
- S. Dreessen, T. Gallet, Proc.of the 5th Eurasphalt Eurobitume Congress E&E2012 (2012) [Google Scholar]
- G. Polacco, J. Stastna, D. Biondi, F. Antonelli, Z. Vlachovicova, L. Zanzotto, J. Colloid Interface Sci. 280 (2004) [Google Scholar]
- M. Jasso, R. Hampl, O. Vacin, D. Bakos, J. Stastna, L. Zanzotto, Fuel Process. Tech. 140 (2015) [Google Scholar]
- European Standard, Bitumen and Bituminous Binders - Determination of the Softening Point - Ring and Ball Method EN 1427 (European Committee for Standardization, 2015) [Google Scholar]
- European Standard, Bitumen and Bituminous Binders - Determination of needle penetration EN 1426 (European Committee for Standardization, 2015) [Google Scholar]
- European Standard, Bitumen and bituminous binders - Determination of the Elastic Recovery of Modified Bitumen EN 13398 (European Committee for Standardization, 2010) [Google Scholar]
- AASHTO, Standard Practice for Superpave Volumetric Design for Hot-Mix Asphalt (HMA) R35-12 (American Association of State Highway and Transportation Officials, Washington D.C., 2012) [Google Scholar]
- AASHTO, Standard Specification for Superpave Volumetric Mix Design M 323-12 (American Association of State Highway and Transportation Officials, Washington D.C., 2012) [Google Scholar]
- AASHTO, Standard Practice for Mixture Conditioning of Hot-Mix Asphalt (HMA) R 30-02 (American Association of State Highway and Transportation Officials, Washington D.C., 2002) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.