Issue |
MATEC Web Conf.
Volume 262, 2019
64 Scientific Conference of the Committee for Civil Engineering of the Polish Academy of Sciences and the Science Committee of the Polish Association of Civil Engineers (PZITB) (KRYNICA 2018)
|
|
---|---|---|
Article Number | 05011 | |
Number of page(s) | 6 | |
Section | Transportation Engineering | |
DOI | https://doi.org/10.1051/matecconf/201926205011 | |
Published online | 30 January 2019 |
High temperature properties of modified bituminous binders produced in Poland
Warsaw University of Technology, ul. Lecha Kaczyńskiego 16, 00-637 Warsaw, Poland
* Corresponding author: p.pokorski@il.pw.edu.pl
Bitumen used for the construction of road pavements should exhibit adequate resistance to loads at high operating temperatures. An effective method of improving the properties of bitumen is their modification. To evaluate the high-temperature properties of bitumen, standard consistency tests and advanced rheological tests under dynamic load are conducted. The main purpose of the article is to assess the high temperature properties of modified binders produced by two major Polish producers. The assessment was based on the tests results of modified binders in the range of the standard softening point temperature test and tests in the dynamic shear rheometer (DSR) according to the requirements of Strategic Highway Research Program (SHRP) and Multiple Stress Creep Recovery Test (MSCR). It has been shown that due to the highest operating temperatures of road pavements in Poland, produced bituminous binders meet the requirements of resistance to permanent deformation with a great reserve.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.