Open Access
Issue
MATEC Web Conf.
Volume 254, 2019
XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
Article Number 06001
Number of page(s) 12
Section Modelling of Structural Materials, Composites and Nanomaterials
DOI https://doi.org/10.1051/matecconf/201925406001
Published online 15 January 2019
  1. J. Górecki, I. Malujda, K. Talaśka, D. Wojtkowiak, Dry ice compaction in piston extrusion process, Acta mechanica et automatica 11, 4, 313-316 (2017) [Google Scholar]
  2. L. Chen, X. Zhang, A review study of solid-gas sublimation flow refrigeration: Form basic mechanism to applications, International Journal of Refrigeration, 40, 61-83, (2014) [CrossRef] [Google Scholar]
  3. J. Vansant, Carbon dioxide emission and merchant market in the European union. In Aresta M. (eds) Carbon Dioxide Recovery and Utilization, Springer Science & Business Media. (2013) [Google Scholar]
  4. Y. Liu, H. Maruyama, S. Matsusaka, Agglomeration process of dry ice particles produced by expanding liquid carbon dioxide, Advanced Powder Technology, 21, 652-657 (2010) [CrossRef] [Google Scholar]
  5. J. Górecki, I. Malujda, K. Talaśka, M. Kukla, P. Tarkowski, Static compression tests of concentrated crystallized carbon dioxide, Applied Mechanics and Materials, 816, 490-495 (2015) [CrossRef] [Google Scholar]
  6. J. Górecki, I. Malujda, K. Talaśka, D. Wilczyński, D. Wojtkowiak, Influence of geometrical parameters of convergent sleeve on the value of limit stress, MATEC Web of Conferences 157: 05006 (2018) [CrossRef] [EDP Sciences] [Google Scholar]
  7. Y. Liu, G. Calvert, C. Hare, M. Ghadiri, S. Matusaka, Size measurement of dry ice particles produced form liquid carbon dioxide, Journal of Aerosol Science, 48, 1-9 (2012) [CrossRef] [Google Scholar]
  8. V. Masa, P. Kuba, Efficient use of compressed air for dry ice blasting, Journal of Cleaner Production, 111, 76-84 (2016) [CrossRef] [Google Scholar]
  9. A. Mazzoldi, T. Hill, J. Colls, CO2 transportation for carbon capture and storage: Sublimation of carbon dioxide from a dry ice bank, International Journal of Greenhouse Gas Control, 2, 210-218 (2008). [CrossRef] [Google Scholar]
  10. S. Dong, B. Song, B. Hansz, et al., Modeling of dry ice blasting and its application in thermal spray, Material Research Innovations, 16, 61-66 (2012) [CrossRef] [Google Scholar]
  11. J. Górecki, I. Malujda, K. Talaśka, Influence of the Value of Limit densification Stress on the Quality of Pellets During the Agglomeration Process of CO2, Procedia Engineering, 136, 269-274 (2016) [CrossRef] [Google Scholar]
  12. M. Li, W. Liu, X. Qing, et al., Feasibility study of a new approach to removal of paint coatings in remanufacturing, Journal of Materials Processing Technology, 234, 102-112 (2016) [CrossRef] [Google Scholar]
  13. Y. Liu, D Hirama D., Matusaka S., Particle removal process during application of impinging dry ice jet, Powder Technology, 2017, 607-613, 2012. [CrossRef] [Google Scholar]
  14. C. Otto, S. Zahn, F. Rost, et al., Physical Methods of cleaning And Disinfection of Surfaces, Food Engineering Review, 3, 171-188 (2011) [CrossRef] [Google Scholar]
  15. G. Spur, E. Uhlmann, F. Elbing, Dry-ice blasting for cleaning: process, optimization and application, Wear, 233-235, 402-411 (1999) [CrossRef] [Google Scholar]
  16. E. Uhlmann, M. Kretzschmar, F. Elbing, V Mihotovic, Deburring with CO2 Snow Blasting. In: J. Aurich, D. Dornfeld (eds) Burrs Analysis, Control and Removal. Springer, Berlin, Heidelberg. [Google Scholar]
  17. A. Witte, M. Bobal, R. David, et al., ), Investigation of the potential of dry ice blasting for cleaning and disinfection in the food production environment, LWT Food Science and Technology, 75, 735-741 (2017). [CrossRef] [Google Scholar]
  18. H. Yamaguchi, X. Niu, K. Sekimoto, P. Neksa, Investigation of dry ice blockage in an ultra-low temperature cascade refrigeration system using CO2 as a working fluid, International Journal of refrigeration, 34, 466-475, (2011). [CrossRef] [Google Scholar]
  19. J. Górecki, Doctoral Thesis: Shaping of the geometrical parameters of the working assembly of the CO2 agglomeration machine using the modeling of the limit stress (in polish), Poznan University of Technology, (2017) [Google Scholar]
  20. K. Talaśka, Study of research and modelling of compaction processes ofpowder and shredded materials, Poznan University of Technology (2018) [Google Scholar]
  21. Z. Drzymała, Basics of Compaction Engineering of Material Compaction (in polish), PWN, (1988) [Google Scholar]
  22. I. Malujda, Modeling of limit stress fields and temperature in plasticizing and compaction processes oriented to the needs of machine design (in polish), Poznan University of Technology, (2012) [Google Scholar]
  23. J. Piwnik, Theory of the experiment in the analysis of extrusion processes (in polish), Bialystock University of Technology, (2010) [Google Scholar]
  24. J. Górecki, I. Malujda, K. Talaśka, M. Kukla, P. Tarkowski, Investigation of internal friction of agglomerated dry ice, Procedia Engineering 136, 275-279 (2016) [CrossRef] [Google Scholar]
  25. V. Baniari, M. Blatnicka. M. Sajgalik, et al., Measurement and numerical analyses of residual stress distribution near weld joint, Procedia Engineering 192, 22-27 (2017) [CrossRef] [Google Scholar]
  26. T. Domański, A. Sapietova, M. Saga, Application of Abaqus Software for the Modeling of Surface Progressive Hardening, Procedia Engineering 177, 64-69 (2017) [CrossRef] [Google Scholar]
  27. W. Piekarska, D. Goszczyńska-Króliszewska, Z. Saternus, et al. Numerical analysis of laser welding with consideration analytical methods of determining phase transformations and mechanical properties of welded joint, MATEC Web of Conferences, 157: 02039 (2018) [CrossRef] [EDP Sciences] [Google Scholar]
  28. J. Górecki, I. Malujda, K. Talaśka, M. Kukla, P. Tarkowski, Influence of the Compression Length on the Ultimate Stress in the Process of Mechanical Agglomeration of Dry Ice, Procedia Engineering 177, 363-368 (2017) [CrossRef] [Google Scholar]
  29. J. Górecki, I. Malujda, K. Talaśka, D. Wilczyński, D. Wojtkowiak, Influence of geometrical parameters of convergent sleeve on the value of limit stress, MATEC Web of Conferences 157: 05006 (2018) [CrossRef] [EDP Sciences] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.