Open Access
| Issue |
MATEC Web Conf.
Volume 254, 2019
XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
|
|
|---|---|---|
| Article Number | 02026 | |
| Number of page(s) | 9 | |
| Section | Modelling and Simulation, Structural Optimization | |
| DOI | https://doi.org/10.1051/matecconf/201925402026 | |
| Published online | 15 January 2019 | |
- V. Baniari, Contribution to evaluation of fatigue damage of welded joints of DOMEX high-strength steels in order to improve their bearing capacity. [Dissertation thesis] (University of Žilina, 110 p., 2018) [Google Scholar]
- V. Baniari, M. Blatnická, M. Šajgalík, M. Vaško, M. Sága, Measurement and numerical analyses of residual stress distribution near weld joint. Procedia Engineering 192, 22-27 (2017) [CrossRef] [Google Scholar]
- R. Halama, A. Markopoulos, F. Fojtik, M. Fusek, Z. Poruba, J. Famfulík, Effect of stress amplitude on uniaxial ratcheting of aluminum alloy 2124-T851. Materialwissenschaft und Werkstofftechnik 48 (8), 814-819 (2017) [CrossRef] [Google Scholar]
- J. Stancek, V. Bulej, Design of driving system for scissor lifting mechanism. Acad. J. of Manufacturing Eng. 13, 38-43 (2015) [Google Scholar]
- M. Macko, K. Tyszczuk, G. Śmigielski, J. Flizikowski, A. Mroziński, Utility of an unitary-shredding method to evaluate the conditions and selection of constructional features during grinding. MATEC Web of Conerences 157 (05016), 1-7 (2018) [CrossRef] [Google Scholar]
- M. Sapieta, V. Dekýš, A. Sapietová, Thermal-stress analysis of beam loaded by 3 point bending. Procedia Engineering 136, 216-219 (2016) [CrossRef] [Google Scholar]
- MATLAB. [online] https://www.mathworks.com/products/matlab.html [Google Scholar]
- P. Oršanský, B. Ftorek, P. Ďurčanský, Mathematical model of a closed hot air engine cycle using MATLAB Simulink. XIX. The Application of Experimental and Numerical Methods in Fluid Mechanics and Energetic 2014, AIP Conference Proceedings 1608, 173-176 (2014) [Google Scholar]
- P. Pecháč, M. Sága, Memetic algorithm with normalized RBF ANN for approximation of objective function and sedondary RBF ANN for error mapping. Procedia Engineering 177, 540-547 (2017) [CrossRef] [Google Scholar]
- K. J. Bathe, Finite Element Procedures. (Prentice Hall, New Jersey, 1982) [Google Scholar]
- ADINA, Theory and Modelling Guide, Vol. III, CFD and FSI. [Help manual] (2017) [Google Scholar]
- M. Bara, T. Kmita, J. Korzekwa, Microstructure and properties of composite coatings obtained on aluminium alloys. Archives of Metallurgy and Materials 61 (3), 1107-1112 (2016) [CrossRef] [Google Scholar]
- R. Grega, J. Krajňák, L. Žuľová, G. Fedorko, V. Molnár, Failure analysis of driveshaft of truck body caused by vibrations. Engineering Failure Analysis 79, 208-215 (2017) [CrossRef] [Google Scholar]
- W. Piekarska, M. Kubiak, Z. Saternus, Numerical simulation of deformations in T-joint welded by the laser beam. Archives of Metallurgy and Materials 58 (4) 1391-1396 (2013) [Google Scholar]
- ESI Group 2015 SysWeld Reference Manual [User Manual] (2015) [Google Scholar]
- M. Dudziak, A. Kołodziej, G. Domek, K. Talaśka, Multi-angularity identification of parameters and compatibility conditions of the axisymmetric connection with form deviations. Procedia Engineering 177, 431-438 (2017) [CrossRef] [Google Scholar]
- P. Krawiec, Numerical Analysis of Geometrical Characteristics of Machine Elements Obtained Through CMM Scanning. Progress in Industrial Mathematics at ECMI 2008, Mathematics in Industry 15, Springer, Berlin, Heidelberg, 933-938 (2010) [CrossRef] [Google Scholar]
- B. Leitner, The procedure of fatigue damage estimation for mechanical structures under service loading. Transport Means 2014, 54-58 (2014) [Google Scholar]
- E. Kalentev, Š. Václav, P. Božek, A. I. Korshunov, V. Tarasov, Numerical analysis of the stress-strain state of a rope strand with linear contact under tension and torsion loading conditions. Advances in Science and Technology Research Journal 11 (2), 231-239 (2017) [Google Scholar]
- J. Zapoměl, V. Dekýš, P. Ferfecki, A. Sapietová, M. Sága, M. Žmindák, Identification of material damping of a carbon composite bar and study of its effect on attenuation of its transient lateral vibrations. Int. Journal of Applied Mechanics 7 (6), (2015) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.