Open Access
Issue
MATEC Web Conf.
Volume 254, 2019
XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
Article Number 02012
Number of page(s) 10
Section Modelling and Simulation, Structural Optimization
DOI https://doi.org/10.1051/matecconf/201925402012
Published online 15 January 2019
  1. K. J. Bathe, Finite Element Procedures. (Prentice Hall, New Jersey, 1982) [Google Scholar]
  2. A. Sapietová, V. Dekýš, Dynamic analysis of rotating machines in MSC.ADAMS. Procedia Engineering 136, 143-149 (2016) [CrossRef] [Google Scholar]
  3. K. Jeřábek, F. Helebrant, J. Jurman, V. Voštová: Stroje pro zemní práce, silniční stroje, I. vydání. Ostrava: VŠB-TUO, Ostrava 1996. 466 s [Google Scholar]
  4. J. R. Johanson. A rolling theory for granular solids. Journal of Applied Mechanics 32, 842–848, 1965 [CrossRef] [Google Scholar]
  5. R. Grega, J. Homisin, J. Krajnak, M. Urbansky, Analysis of the impact of flexible couplings on gearbox vibrations, Scientific journal of silesian university of technology-series transport 91, 43-50 (2016) [CrossRef] [Google Scholar]
  6. W. Piekarska, M. Kubiak, M. Žmindák, Issues in numerical modeling of phase transformations in welded joint. XXI Polish-Slovak Scientific conference machine modeling and simulations MMS 2016, Procedia Engineering, 177, 141-148 (2017) [Google Scholar]
  7. P. Kovacikova, R. Bezdedova, J. Vavro,Jr. J. Vavro, Comparison of numerical analysis of stress-strain states of cast iron with vermicular graphite shape and globular graphite shape. 20 th International conference machine modeling and simulations MMS 2015, Procedia Engineering 136, 28-32 (2016) [Google Scholar]
  8. M. Dudziak, G. Domek, A. Kołodziej, K. Talaśka, Contact Problems Between the Hub and the Shaft with a Four-Angular Shape of Cross-Section for Different Angular Positions, Applied Mechanics and Materials 816, 54-62 (2015) [CrossRef] [Google Scholar]
  9. R. Grega, J. Krajňák, L. Žuľová, G. Fedorko, V. Molnár, Failure analysis of driveshaft of truck body caused by vibrations. Engineering Failure Analysis 79, 208-215 (2017) [CrossRef] [Google Scholar]
  10. L. Zuľova, R. Grega, J. Krajňák, G. Fedorko, V. Molnár, Optimization of noisiness of mechanical system by using a pneumatic tuner during a failure of piston machine. Engineering Failure Analysis 79, 845-851 (2017) [CrossRef] [Google Scholar]
  11. E. Kalentev, Š. Václav, P. Božek, A. I. Korshunov, V. Tarasov, Numerical analysis of the stress-strain state of a rope strand with linear contact under tension and torsion loading conditions. In Advances in Science and Technology Research Journal. 11, Issue 231-239 (2017) [CrossRef] [Google Scholar]
  12. V.P. Mateichyk, V.P. Volkov, P.B. Komov, I.V. Gritsuk, et al. Special features of vehicle condition monitoring using onboard diagnostics systems. Project management, systems analysis and logistics, scientific journal, NTU, 13, 126-138 (2014) [Google Scholar]
  13. Y. Turygin, P. Božek, I. V. Abramov, Y. R. Nikitin, Reliability determination and diagnostics of a mechatronic system. In Advances in Science and Technology Research Journal. 12, Issue 2, 274-290 (2018) [CrossRef] [Google Scholar]
  14. P. Krawiec, G. Domek, Ł. Warguła, K. Waluś, J. Adamiec: The application of the optical system ATOS II for rapid prototyping methods of non-classical models of cogbelt pulleys. In: MATEC Web of Conferences, 157, art. no 01010 (2018) [Google Scholar]
  15. P. Krawiec, Numerical Analysis of Geometrical Characteristics of Machine Elements Obtained Through CMM Scanning, Progress in Industrial Mathematics, Springer-Verlag, Berlin–Heidelberg, 925-930 (2010) [Google Scholar]
  16. Flizikowski J., Macko M., Czerniak J., Mroziński, A.: Implementation of genetic algorithms into development of mechatronic multi-edge’s grinder design, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE, Nov. 11-17, 2011, Denver, Colorado, USA [Google Scholar]
  17. R. Halama, J. Podešva, R. Suzuki, M. Matsubara, R. Čech, Mechanics of Herbert Pendulum Hardness Tester and its Application. In: Engineering Materials, 741, 122-127 (2017) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.