Open Access
MATEC Web Conf.
Volume 254, 2019
XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
Article Number 01017
Number of page(s) 10
Section Methods and Systems in Machine Design
Published online 15 January 2019
  1. R. Halama, M. Fusek, Z. Poruba, Influence of mean stress and stress amplitude on uniaxial and biaxial ratcheting of ST52 steel and its prediction by the AbdelKarim–Ohno model. International Journal of Fatigue 91, 313-321 (2016) [CrossRef] [Google Scholar]
  2. J. Gerlici, T. Lack, J. Harušinec, Realistic simulation of railway operation on the RAILBCOT test stand. Applied mechanics and materials 486, 387-395 (2014) [CrossRef] [Google Scholar]
  3. A. Sapietová, V. Dekýš, M. Sapieta, P. Pecháč, Application of computational and design approaches to improve carrier stability. Procedia Eng. 96, 410-418 (2014) [CrossRef] [Google Scholar]
  4. J. Czerniak, D. Ewald, M. Macko, G. Śmigielski, K. Tyszczuk, Approach to the Monitoring of Energy Consumption in Eco-grinder Based on ABC optimization, in: S. Kozielski et al. (Eds.): BDAS 2015, Communications in Computer and Information Science 521, Springer International Publishing Switzerland, 516-529, (2015) [Google Scholar]
  5. P. Šťastniak, M. Moravčík, Freight bogie prototype properties analysis by means of simulation computations. Manufacturing technology 17 (3), 381-388 (2017) [Google Scholar]
  6. G. Domek, A. Kołodziej: Design of the tendon structure in timing belts Procedia Engineering 136, 365-369 (2016) [CrossRef] [Google Scholar]
  7. J. Galliková, R. Poprocký, P. Volna, Implementation of FMEA method in maintenance of semi-trailer combination. Diagnostyka 17 (4), 85-92 (2016) [Google Scholar]
  8. M. Macko, J. Flizikowski, Z. Szczepański, K. Tyszczuk, G. Śmigielski, A. Mroziński, J. Czerniak, A. Tomporowski, CAD/CAE applications in mill’s design and investigation. Proceedings of the 13th International Scientific Conference on Computer Aided Engineering Editors: Rusinski, Eugeniusz, Pietrusiak, Damian (Eds.). Series Title: Lecture Notes in Mechanical Engineering. Chapter 35 DOI: 10.1007/978-3-319-50938-9_35. ISBN: 978-3-319-50937-2, Springer International Publishing AG, 343-351 (2017) [Google Scholar]
  9. J. Vavro Jr., J. Vavro, P. Kováčiková, P. Kopas, M. Handrik, R. Bezdedová, Numerical analysis of stress states for graphitic cast iron structures. Applied Mechanics and Materials 611, 252-255 (2014) [CrossRef] [Google Scholar]
  10. J. Gerlici, T. Lack, Railway wheel and rail head profiles development based on the geometric characteristics shapes. Wear: an international journal on the science and technology of friction, lubrication and wear 271 (1-2) Sp. iss., 246-258 (2011) [Google Scholar]
  11. G. Śmigielski, W. Toczek, R. Dygdała, K. Stefański, Metrological analysis of precision of the system of delivering a water capsule for explosive production of water aerosol. Metrology and Measurement Systems, 23 (1), 47-58 (2016) [Google Scholar]
  12. M. Sapieta, A. Sapietová, L. Gajdoš, Determine the fatigue life of flange of bearings test station. Procedia Engineering 177, 548-553 (2017) [CrossRef] [Google Scholar]
  13. R. Halama, M. Fusek, F. Fojtík, An industrial application of a method for spatial motion measurement. EAN 2010: 48th International Scientific Conference on Experimental Stress Analysis, 75-80 (2010) [Google Scholar]
  14. M. Handrik, M. Vaško, P. Kopas, V. Mozer, The linear and nonlinear stability loss of structures due to thermal load. Procedia Engineering 136, 359-364 (2016) [CrossRef] [Google Scholar]
  15. J. Vavro, J. Vavro Jr, P. Kováčiková, P. Kopas, M. Handrik, Simulation and analysis of defect distribution in passenger car tire under dynamic loading. Applied Mechanics and Materials 611, 544-547 (2014) [CrossRef] [Google Scholar]
  16. M. Dudziak, G. Domek, A. Kołodziej, K. Talaśka, Contact Problems Between the Hub and the Shaft with a Four-Angular Shape of Cross-Section for Different Angular Positions. Applied Mechanics and Materials 816, 54-62 (2015) [CrossRef] [Google Scholar]
  17. P. Krawiec, Numerical Analysis of Geometrical Characteristics of Machine Elements Obtained Through CMM Scanning. Progress in Industrial Mathematics, Springer-Verlag, Berlin–Heidelberg, 925-930 (2010) [Google Scholar]
  18. V.P. Mateichyk, V.P. Volkov, P.B. Komov, I.V. Gritsuk, et al., Special features of vehicle condition monitoring using onboard diagnostics systems. Project management, systems analysis and logistics: Scientifc journal, K.: NTU, 13, 126-138, (2014) [Google Scholar]
  19. Y. Turygin, P. Božek, I. V. Abramov, Y. Nikitin, Reliability determination and diagnostics of a mechatronic system. In Advances in Science and Technology Research Journal. Vol. 12, Iss. 2, 274-290, ISSN (2018) [CrossRef] [Google Scholar]
  20. E. Kalentev, Š. Václav, P. Božek, A. I. Korshunov, V. Tarasov, Numerical analysis of the stress-strain state of a rope strand with linear contact under tension and torsion loading conditions. In Advances in Science and Technology Research Journal. Vol. 11, iss. 2, 231-239, ISSN 2299-8624, DOI: 10.12913/22998624/71181 (2017) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.