Open Access
| Issue |
MATEC Web Conf.
Volume 234, 2018
BulTrans-2018 – 10th International Scientific Conference on Aeronautics, Automotive and Railway Engineering and Technologies
|
|
|---|---|---|
| Article Number | 04005 | |
| Number of page(s) | 8 | |
| Section | Dynamics, Strength and Reliability of Vehicles | |
| DOI | https://doi.org/10.1051/matecconf/201823404005 | |
| Published online | 21 November 2018 | |
- A. Guljaev, Physical Metallurgy (Mashinostroenie, Moskow, 1977) [Google Scholar]
- H. Cary, Modern welding technology, 4th ed., (Prentice Hall, Englewood Cliffs, NJ, 1998) [Google Scholar]
- A. Zhelev, Materials Engineering. Manufacturing processes and processability, Sofia (2002) [Google Scholar]
- D. Kotecki, F. Armao, Stainless steels properties - how to weld them where to use them (The Lincoln Electric Company, 2003) [Google Scholar]
- A. Lakshminarayanan, K. Shanmugam, V. Balasubramanian, Effect of autogenous arc welding processes on tensile and impact properties of ferritic stainless steel joints, Journal of Iron and Steel Research, 16(1), 62-68 (2009) [CrossRef] [Google Scholar]
- K. Tseng, C. Chou, The effect of pulsed GTA welding on the residual stress of a stainless steel weldment, Journal of Materials Processing Technology, 123, 346–353 (2002) [CrossRef] [Google Scholar]
- V. Vinokurov, Weld stresses and deformations (Machinostroenie, Moskow, 1968) [Google Scholar]
- D. Radaj, Welding residual stresses and distortion. Calculation and measurement, (DVS Verlag, 2003) [Google Scholar]
- T. Toyooka, T. Tsunerari, R. Ide, T. Tange, Fatugue test of residual stress induced specimens in carbon steel, Welding Journal, 64 (1), 29-36 (1985) [Google Scholar]
- ASTM Standard E837-13a, Determining residual stresses by the hole-drilling strain-gage method. [Google Scholar]
- Y. Arai, M. Kikuchi, T. Watanabe, M. Nagaki, Residual stresses due to welding and its effect on the assessment of cracks near the weld interface, International Journal of Pressure Vessels and Piping, 63, 237–248 (1995) [CrossRef] [Google Scholar]
- P. Withers, H. Bhadeshia, Residual stress. Part 1 Measurement techniques, Materials Science and Technology, 17, 355–365 (2001) [CrossRef] [Google Scholar]
- T. Holden, J. Root, V. Fidleria, R. Holt, G. Roy, Application of neutron diffraction to engineering problems, Material Science Forum, 27-28, 359-370 (1988) [Google Scholar]
- M. Park, H. Yang, D. Jang, J. Kim, T. Jin, Residual stress measurement on welded specimen by neutron diffraction, Journal of Materials Processing Technology, 155-156, 1171-1177 (2004) [CrossRef] [Google Scholar]
- J. Goldak, M. Akhalaghi, Computational welding mechanics, (Springer Verlag, 2005) [Google Scholar]
- C. Schwenk, M. Rethmeier, Material properties for welding simulation - measurement, analysis, and exemplary data, Welding Journal, 90 (6), 220-227 (2011) [Google Scholar]
- M. Onsøien, M. M`hamdi, O. Akselsen, Residual stresses in weld thermal cycle simulated specimens of X70 pipeline steel, Welding Journal, 89 (6), 127-132 (2010) [Google Scholar]
- V. Tsonev, Determination of mechanical characteristics of a new alloy steel at high temperatures and static load, BulTrans-2010 Proceedings, 209-211 (2010) [Google Scholar]
- P. Ghosh, K. Devakumaran, A. Pramanick, Effect of pulse current on shrinkage stress and distortion in multipass GMA welds of different groove size, Welding Journal, 89 (3), 43-53 (2010) [Google Scholar]
- V. Goyal, P. Ghosh, J. Sainic, Analytical studies on thermal behaviour and geometry of weld pool in pulsed current gas metal arc welding, Journal of Materials Processing Technology, 209, 1318–1336 (2009) [CrossRef] [Google Scholar]
- P. Ghosh, A. Ghosh, Control of residual stresses affecting fatigue life of pulsed current gas metal arc weld of high strength aluminum alloy, Metallurgical and Materials Transactions A, 35 (8), 2439-2444 (2004) [CrossRef] [Google Scholar]
- S. Kulkarni, P. Ghosh, S. Ray, Improvement of weld characteristics by variation in welding processes and parameters in joining of thick wall 304LN stainless steel pipe, ISIJ International, 48 (11), 1560-1569 (2008) [CrossRef] [Google Scholar]
- P. Ghosh, S. Gupta, H. Randhawa, Analytical studies on characteristics of vertical up bead on plate weld deposition using pulsed current GMAW, International Journal for the Joining of Materials, 12 (3), 76-85 (2000) [Google Scholar]
- L. Lazov, I. Muhtarov, V. Tsonev, Method for examination of forces in butt single pass arc welded joins, Journal of the Technical University Sofia, branch Plovdiv, 14, 179-184 (2009) [Google Scholar]
- L. Lazov, I. Muhtarov, P. Petrov, Modeling of Temporary and Residual Stresses and Strains in Arc Welded Joints, Journal of the Technical University Sofia, branch Plovdiv, 14, 173-178 (2009) [Google Scholar]
- T. Iamboliev, I. Muhtarov, T. Petrov, Investigation of the temperature field and forces under GMAW of double pass butt welds, Proceedings of the 2nd SE IIW Congress, Sofia, 272-276 (2010) [Google Scholar]
- L. Yajiang, W. Juan, C. Maoai, S. Xiaoqin, Finite element analysis of residual stress in the welded zone of high strength steel, Bulletin of Materials Science, 27, 127–132 (2004) [CrossRef] [Google Scholar]
- ISO 15614-1:2004, Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys [Google Scholar]
- ANSYS User’s manual, (Swanson Analysis Systems, Inc., Houston, 1998) [Google Scholar]
- Lucefin Group catalog data, www.lucefin.com [Google Scholar]
- T. Iamboliev, Optimizing pulse GTA welding of austenitic stainless steel 1. 4404, Proceedings of science conference, Ruse University, 51(2), 196-200 (2012) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.