Open Access
Issue
MATEC Web Conf.
Volume 220, 2018
2018 The 2nd International Conference on Mechanical, System and Control Engineering (ICMSC 2018)
Article Number 01007
Number of page(s) 8
Section Functional Material Design and Modeling
DOI https://doi.org/10.1051/matecconf/201822001007
Published online 29 October 2018
  1. A.L. Wang, J.F. Zhao., Sci China Technol Sci 53(7), 1798-1808 (2010) [CrossRef] [Google Scholar]
  2. M.M. Yovanovich, IEEE Trans Compon Packaging Technol (28(2), 182-206 (2005) [CrossRef] [Google Scholar]
  3. Y. Chen, X. Huang, R. Kang, Chin J Aeronaut (25(4), 584-592 (2012) [CrossRef] [Google Scholar]
  4. J.F. Archard, Proc R Soc Lond A Math Phys Sci (243(1233), 190-205 (1957) [CrossRef] [Google Scholar]
  5. G. Zavarise, M. Borri-Brunetto, M. Paggi, Wear 257(3–4), 229-245 (2004) [CrossRef] [Google Scholar]
  6. M.V. Murashov, S.D. Panin, Proceedings of the International heat transfer conference IHTC14, 6, 387-392 (2010) [Google Scholar]
  7. M.V. Murashov, S.D. Panin, Int J Heat Mass Transf 90, 72-80 (2015) [CrossRef] [Google Scholar]
  8. W. Yan, K. Komvopoulos, J Appl Phys 84, 3617-3624 (1998) [CrossRef] [Google Scholar]
  9. M.S. Bobji, S.K. Biswas, J.B. Pethica, Appl Phys Lett 71, 1059-1061 (1997) [CrossRef] [Google Scholar]
  10. C. Ji, H. Zhu, W. Jiang, Chin J Mech Eng (26(1), 128-136 (2013) [CrossRef] [Google Scholar]
  11. C.K. Bora, E.E. Flater, M.D. Street, et al, Tribol Lett (19(1), 37-48 (2005) [CrossRef] [Google Scholar]
  12. W. Pan, X. Li, N. Guo, et al, Adv Mech Eng (9(3), 1-11 (2017) [Google Scholar]
  13. M. Ciavarella, V. Delfine, G.Demelio, J Mech Phys Solids 54, 2569-2591 (2006) [CrossRef] [Google Scholar]
  14. M. Bahrami, M.M. Yovanovich, J.R. Culham, Int J Heat Mass Transf 48(16), 3284-3293 (2005) [CrossRef] [Google Scholar]
  15. M.K. Thompson, PhD thesis. Cambridge, MA, USA: Massachusetts Institute of Technology (2007) [Google Scholar]
  16. S. Lee, Y.H. Jang, W. Kim, J Appl Phys 103, 074308 (2008) [Google Scholar]
  17. M.H. Müser, W.B. Dapp, R. Bugnicourt, et al, Tribol Lett 65, 118 (2017) [Google Scholar]
  18. G. Carbone, F. Bottiglione, J Mech Phys Solids 56, 2555-2572 (2008) [CrossRef] [Google Scholar]
  19. C. Yang, B. Persson, J PhysCondens Matter 20, 215-214 (2008) [Google Scholar]
  20. Y. Waddad, V. Magnier, Ph. Dufrénoy, et al, Tribol Lett 65, 155 (2017) [CrossRef] [Google Scholar]
  21. M. Liu, H. Proudhon, Mech Mater 103, 78-86 (2016) [CrossRef] [Google Scholar]
  22. J.A. Greenwood, Br J Appl Phys 17(12), 1621-1632 (1966) [CrossRef] [Google Scholar]
  23. A.J.W. Moore, Proc R Soc Lond A Math Phys Eng Sci 195, 231-244 (1948) [CrossRef] [Google Scholar]
  24. K.A. Kochergin, Contact Welding (Machine building Publ., Leningrad, Russia, 1987) [Google Scholar]
  25. S. Cai, PhD thesis. Columbus, Ohio, USA: The Ohio State University (2008) [Google Scholar]
  26. H. Ghaednia, X. Wang, S. Saha, et al, Appl Mech Rev (69(6), 060804 (2017) [CrossRef] [Google Scholar]
  27. H. Hertz, J Reine Angew Math (92(1), 156-171 (1882) [Google Scholar]
  28. H. Songa, A.I. Vakisb, X. Liuc, et al, J Mech Phys Solids 106, 1-14 (2017) [CrossRef] [Google Scholar]
  29. F. Sun, E. Van der Giessen, L. Nicola, Wear 296(1-2), 672–680 (2012) [CrossRef] [Google Scholar]
  30. L. Kogut, I. Etsion, J Appl Mech (69(5), 657-662 (2002) [CrossRef] [Google Scholar]
  31. R.L. Jackson, I. Green, J Tribol (127(2), 343-354 (2005) [CrossRef] [Google Scholar]
  32. P. Sahoo, B. Chatterjee, Eng 2, 205-211 (2010) [CrossRef] [Google Scholar]
  33. H. Ghaednia, A. Rostami R.L. Jackson, IEEE 58th Holm Conference on Electrical Contacts, Protland, OR, USA, 1-7 (2012) [Google Scholar]
  34. S.S. Wadwalkar, R.L. Jackson, L. Kogut, Proc Inst Mech Eng J 224, 1091-1102 (2010) [CrossRef] [Google Scholar]
  35. A. Goedecke, R.L. Jackson, R. Mock, Wear 268, 1285-1294 (2010) [CrossRef] [Google Scholar]
  36. J.A. Greenwood, J.B.R. Williamson. Proc R Soc Lond A Math Phys Sci 295, 300-319 (1966) [CrossRef] [Google Scholar]
  37. X. Zhang, P. Cong, S. Fujiwara, et al, Int J Heat Mass Transf 47(5), 1091-1098 (2004) [CrossRef] [Google Scholar]
  38. Y. Zhao, L. Chang, J Tribol 123, 857-864 (2001) [CrossRef] [Google Scholar]
  39. P. Sahoo, A. Banerjee, J Phys D Appl Phys 38, 4096-4103 (2005) [CrossRef] [Google Scholar]
  40. P. Sahoo, J Phys D Appl Phys 39, 2809-2818 (2006) [CrossRef] [Google Scholar]
  41. M. Ciavarella, J.A. Greenwood, M. Paggi, Wear 265, 729-734 (2008) [CrossRef] [Google Scholar]
  42. M. Paggi, M. Ciavarella, Wear 268(7), 1020-1029 (2010) [CrossRef] [Google Scholar]
  43. I. Manika, J. Maniks, Acta Mater 54(8), 2049-2056 (2006) [CrossRef] [Google Scholar]
  44. M.V. Murashov, Y.V. Kornev, Tech Phys (84(3), 75-81 (2014) [Google Scholar]
  45. Y.G. Kalpin, V.I. Perfilov, P.A. Petrov, et al, Resistance to deformation and plasticity of metals treated by pressure (Machine building Publ., Moscow, Russia, 2011) [Google Scholar]
  46. L. Wang, H. Liu, J. Zhang, et al. Precis Eng (37(4), 817-824 (2013) [CrossRef] [Google Scholar]
  47. G.E. Mase. Schaum’s outline of theory and problems of continuum mechanics. (New York: McGraw-Hill, 1970) [Google Scholar]
  48. T.J.R. Hughes. In: Nemat-Nasser S, Asaro RJ, Hegemier GA (eds) Mechanics of elastic and inelastic solids 6, 30-57 (Dordrecht, Springer, 1984) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.