Open Access
Issue
MATEC Web Conf.
Volume 203, 2018
International Conference on Civil, Offshore & Environmental Engineering 2018 (ICCOEE 2018)
Article Number 05006
Number of page(s) 8
Section Highway and Transportation Engineering
DOI https://doi.org/10.1051/matecconf/201820305006
Published online 17 September 2018
  1. A. Khodaii. and A. Mehrara, Evaluation of permanent deformation of unmodified and SBS modified asphalt mixtures using dynamic creep test. Construction and Building Materials, 23, 7, p. 2586-2592(2009). [CrossRef] [Google Scholar]
  2. N. Bala, et al., Rheological and rutting evaluation of composite nanosilica/polyethylene modified bitumen. Proceedings of the 7th International Conference on Key Engineering Materials (ICKEM 2017) held between 11th to 13th March 2017, Penang Malaysia. IOP Conference Series: Materials Science and Engineering, 201, 1 (2017) [Google Scholar]
  3. R. Imaninasab, Effect of granular polymers on rutting performance of SMA with respect to modification process. Construction and Building Materials. 130: p. 64-72 (2017). [CrossRef] [Google Scholar]
  4. N. Bala, I. Kamaruddin, and M. Napiah, The Influence of Polymer on Rheological and Thermo Oxidative Aging Properties of Modified Bitumen Binders. Jurnal Teknologi, 79, 6 p. 69-73 (2017). [CrossRef] [Google Scholar]
  5. Sengoz, B. and G. Isikyakar, Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen. Construction and Building Materials, 22 9: p. 1897-1905 (2008). [CrossRef] [Google Scholar]
  6. N. Bala, M. Napiah, and I. Kamaruddin, Effect of nanosilica particles on polypropylene polymer modified asphalt mixture performance. Case studies in construction materials, 8 p. 447-454 (2018). [CrossRef] [Google Scholar]
  7. G.G Al-Khateeb, and N.M. Al-Akhras, Properties of Portland cement-modified asphalt binder using Superpave tests. Construction and Building Materials, 25 2: p. 926-932 (2011). [CrossRef] [Google Scholar]
  8. N. Bala, I. Kamaruddin, and M. Napiah, THE INFLUENCE OF POLYMER ON RHEOLOGICAL AND THERMO OXIDATIVE AGING PROPERTIES OF MODIFIED BITUMEN BINDERS. Jurnal Teknologi, 79, 6 p. 69-73(2017). [CrossRef] [Google Scholar]
  9. G.D. Airey, Rheological properties of styrene butadiene styrene polymer modified road bitumens☆. Fuel. 82, 14: p. 1709-1719 (2003) [CrossRef] [Google Scholar]
  10. N. Bala, et al., Polymer Nanocomposite-Modified Asphalt: Characterisation and Optimisation Using Response Surface Methodology. Arabian Journal for Science and Engineering, p. 1-11(2018). [Google Scholar]
  11. J. Zhu, B. Birgisson, and N. Kringos, Polymer modification of bitumen: Advances and challenges. European Polymer Journal, 54: p. 18-38 (2014). [CrossRef] [Google Scholar]
  12. N. Bala, M. Napiah, and I. Kamaruddin, Nanosilica composite asphalt mixtures performance-based design and optimisation using response surface methodology. International Journal of Pavement Engineering, p. 1-12(2018). [Google Scholar]
  13. Y. Niazi, and M. Jalili, Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion. Construction and Building Materials, 23 3 p. 1338-1343 (2009). [CrossRef] [Google Scholar]
  14. M, A.S.T., “ASTM D5-13 “Standard Test Method for Penetration of Bituminous Materials”. ASTM International, 2013. 04, 03. [Google Scholar]
  15. M, A.S.T., “ASTM D36-14“ Standard Test Method for Softening Point of Bitumen (Ring and Ball Apparatus”. ASTM International, 2014. 04, 04. [Google Scholar]
  16. M, A.S.T., “ASTM D2872-12 “Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)”. ASTM International, 2012. [Google Scholar]
  17. T.W. Kennedy, et al., Superior performing asphalt pavements (Superpave): The product of the SHRP asphalt research program. Strategic Highway Research Program, National Research Council, Report No. SHRP-A-410, 1994. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.