Open Access
Issue |
MATEC Web Conf.
Volume 199, 2018
International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2018)
|
|
---|---|---|
Article Number | 04004 | |
Number of page(s) | 6 | |
Section | Reinforcement Corrosion: Mechanisms, Prediction and Modelling | |
DOI | https://doi.org/10.1051/matecconf/201819904004 | |
Published online | 31 October 2018 |
- M. Torres-Luque, E. Bastidas-Arteaga, F. Schoefs, M. Sánchez-Silva, and J. F. Osma, Constr. Build. Mater., 68, pp. 68–81, (2014) [CrossRef] [Google Scholar]
- J. P. Broomfield, “Corrosion of Steel in Concrete Understanding, Investigation and Repair”, (2nd Edition. London and New York: Taylor & Francis Group, 2007) [Google Scholar]
- L. Peng and M. G. Stewart, Conc. Inst. of Australia, 41, 3, pp. 36–47, (2015) [Google Scholar]
- A. Castel, T. Vidal., R. François, and G. Arliguie, “Mag. of Conc. Res., 55, 2, pp. 151–159, (Apr-2003) [CrossRef] [Google Scholar]
- A. Castel and D. Jenkins, Conc. Inst. of Australia, 41, 3, pp. 36–64, (2015) [Google Scholar]
- K. G. Papakonstantinou and M. Shinozuka, Eng. Struct., 57, pp. 306–326, (2013) [Google Scholar]
- S. Caré and A. Raharinaivo, Cem. Concr. Res., 37, 12, pp. 1598–1612, (2007) [Google Scholar]
- C. Andrade and C. Alonso, Mater. Struct., 37, 9, pp. 623–643, (2004) [Google Scholar]
- M. Otieno, H. Beushausen, and M. Alexander, Mater. Struct., 49, 6, pp. 1–18, (2015) [Google Scholar]
- M. B. Otieno, “The Development of Empirical Chloride-induced Corrosion Rate Prediction Models for Cracked and Uncracked Steel Reinforced Concrete Structures in the Marine Tidal Zone,” (University of Cape Town, 2014) [Google Scholar]
- N. T. Tran and Q. Huang, “Influence of Cracks on Chloride-Induced Corrosion in Reinforced Concrete Structures,” (Chalmers University of Technology, Gothenburg, Sweden, 2006) [Google Scholar]
- K. Hornbostel, C. K. Larsen, and M.R. Geiker, Cem. Concr. Compos., 39, pp. 60–72, (2013) [Google Scholar]
- H. Zhang, W. Zhang, X. Gu, X. Jin, and N. Jin, Struct. Infrastruct. Eng., 12, 11, pp. 1428–1438, (2016) [Google Scholar]
- B. Kang and H. Shim, Int. J. Railw., 4, 4, pp. 86–92, (2011) [Google Scholar]
- L. Jin, R. Zhang, X. Du, and Y. Li, Constr. Build. Mater., 95, pp. 171–185, (2015) [Google Scholar]
- D. V. Val and P. A. Trapper, 3rd International Conference on Bridge Maintenance, Safety and Management-Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost, pp. 527–528 (2006) [CrossRef] [Google Scholar]
- D. V. Val and P. A. Trapper, Reliab. Eng. Syst. Saf., 93, 3, pp. 364–372, (2008) [Google Scholar]
- Y. Zhang, W. Sun, Z. Liu, and S. Chen, J. Zhejiang Univ. Sci. A, Applied Phys. Eng., 12, 9, pp. 692–701, (2011) [Google Scholar]
- Y. Zhang, W. Sun, S. Chen., and F. Guo., J. Wuhan Univ. Technol. Sci. Ed., 26, 5, pp. 978–982, (2011) [Google Scholar]
- J. Gulikers, Mater. Corros., 56, 6, pp. 393–403, (2005) [Google Scholar]
- M. Pour-Ghaz, O. B. Isgor, and P. Ghods, Corros. Sci., 51, 2, pp. 415–425, (2009) [Google Scholar]
- M. Pour-Ghaz, O. Burkan Isgor, and P. Ghods., Corros. Sci., 51, 2, pp. 426–433, (2009) [Google Scholar]
- A. N. Scott and M. G. Alexander, Mag. Concr. Res., 59, 7, pp. 495–505, (2007) [Google Scholar]
- M. Otieno, “Corrosion Propagation in Cracked and Un-cracked Concrete,” (Univeristy of Cape Town, 2008) [Google Scholar]
- Y. Liu and R. E. Weyers, ACI Mater. J., 95, 6, pp. 675–680, (1998) [Google Scholar]
- ASTM G1-90, “Standard Practice for Preparing, Cleaning, and Evaluation Corrosion Test Specimens,” (ASTM, p. 8, 2003) [Google Scholar]
- G. Golden, “The Effect of Cyclic Wetting and Drying on the Corrosion Rate of Steel in Reinforced Concrete,” (University of Cape Town, South Africa, 2015) [Google Scholar]
- ASTM C876-09, “Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete,” (ASTM 2009) [Google Scholar]
- P. Azarsa and R. Gupta, Adv. Mater. Sci. Eng., 2017, (2017) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.