Open Access
| Issue |
MATEC Web Conf.
Volume 167, 2018
2018 3rd International Conference on Mechanical, Manufacturing, Modeling and Mechatronics (IC4M 2018) – 2018 3rd International Conference on Design, Engineering and Science (ICDES 2018)
|
|
|---|---|---|
| Article Number | 02004 | |
| Number of page(s) | 5 | |
| Section | Mechanical and Manufacturing Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201816702004 | |
| Published online | 23 April 2018 | |
- T. Teng, P. Chang, W. Tseng, “Effect of welding sequences on residual stresses,” Computers and Structures, (81),(2003). [Google Scholar]
- W. Jiang, K. Yahiaoui, “Effect of welding sequence on residual stress distribution in a multipass welded piping branch junction”, International Journal of Pressure Vessels and Piping, (95), (2012). [Google Scholar]
- D. Deng, “Influence of deposition sequence on welding residual stress and deformation in an austenitic stainless steel J-groove welded joint”, Materials and Design, (49),(2013). [Google Scholar]
- A.H. Yaghi, T.H. Hyde, A.A. Becker, W. Sunb, “Finite element simulation of residual stresses induced by the dissimilar welding of a P92 steel pipe with weld metal IN625”, International Journal of Pressure Vessels and Piping, (2013). [Google Scholar]
- A. Skouras, P.E.J. Flewitt, M. Peel, M.J. Pavier, “Residual stress measurements in a P92 steel-In625 superalloy metal weldment in the as-welded and after post weld heat treated,” International Journal of Pressure Vessels and Piping, (123-124), (2014). [Google Scholar]
- D.f. Fu, Ch. Zhou, C. LI, G. Wang, L. LI, “Effect of welding sequence on residual stress in thin-walled octagonal pipe-plate structure,” Transactions of Nonferrous Metals Society of China, 3(24), (2014). [Google Scholar]
- T. Bajpei, H. Chelladurai, M. Zahidansari, “Mitigation of residual stresses and distortions in thin aluminium alloy GMAW plates using different heat sink models,” Journal of Manufacturing Processes, (22), (2016) [Google Scholar]
- S.h. Cho, J.w. Kim, “analysis of residual stress in carbon steel weldment incorporating phase transformation,” science and technology of welding and joining, 4(7), (2002). [Google Scholar]
- L. Yajiang, W. Lura, C. Maoi, S. Xiaoqin, “finite element analysis of residual stress in the welded zone of high strength steel,” Bulletin of Materials Science, 2(27),(2004). [Google Scholar]
- Ansys, Rev 17.0, Ansys, Inc., Canonburg, PA, (2000). [Google Scholar]
- D. Naeem, “Analysis of weld-induced residual stresses and distortions in thin-walled cylinders,”, Journal of Mechanical Science and Technology, (23), (2009). [Google Scholar]
- B. Taljat, B. Radhakrishnan, T. Zacharia, “numerical analysis of GTA welding process with emphasis on post solidification phase transformation effects on residual stresses,” materials science and engineering, 1-2(246),, (1998) [Google Scholar]
- B.A.B. Andersson, “thermal stresses in submerged-arc welded joint considering phase transformations,” Journal of Engineering Materials and Technology, (100), (1978). [Google Scholar]
- J. Goldak, A. Chakrorati, M.G. Bibby, “A new finite element model for welding heat sources,” metallurgical tranctions, 2(15), (1984). [Google Scholar]
- P.H. Chang, T.L. Teng, “numerical and experimental investigations on the residual stresses of butt-welded joints,” computational materials science, 4 (29), (2004). [Google Scholar]
- S. Wen, P. Hilton, D. C Farragia, “finite element modeling of submerged arc welding process,” journal of materials processing technology, 1(119), (2001). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.