Open Access
Issue
MATEC Web Conf.
Volume 165, 2018
12th International Fatigue Congress (FATIGUE 2018)
Article Number 14013
Number of page(s) 6
Section High Cycle Fatigue, Fatigue at Notches
DOI https://doi.org/10.1051/matecconf/201816514013
Published online 25 May 2018
  1. MR. Bayoumi, A.K. Abdellatif. Effect of surface finish on fatigue strength. Eng. Fract. Mech., 51, 861-70, (1995). [CrossRef] [Google Scholar]
  2. S.K. Ås, B. Skallerud, B.W. Tveiten, B. Holme. Fatigue life prediction of machined components using finite element analysis of surface topography. Int. J. Fatigue, 27, 1590-6, (2005). [CrossRef] [Google Scholar]
  3. D. Novovic, R.C. Dewes, D.K. Aspinwall, W. Voice, P. Bowen. The effect of machined topography and integrity on fatigue life. Int. J. Mach. Tool Manu., 44, 125-134, (2004). [CrossRef] [Google Scholar]
  4. H. Itoga, K. Tokaji, M. Nakajima, H.N. Ko. Effect of surface roughness on step-wise S–N characteristics in high strength steel. Int. J. Fatigue, 25, 379-385, (2003). [CrossRef] [Google Scholar]
  5. Y. Murakami, K. Takahashi, T. Yamashita. Quantitative evaluation of the effect of surface roughness on fatigue strength (Effect of depth and pitch of roughness). Nippon Kikai Gakkai Robunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers Part A, 63, 1612-1619, (1997). [CrossRef] [Google Scholar]
  6. M. Yukitaka. Effect of Surface Roughness on Fatigue Strength. Metal Fatigue, Elsevier Science Ltd, Oxford, pp. 305-320, (2002). [Google Scholar]
  7. TR. Thomas. Effect of scratches and of various workshop finishes upon the fatigue strength of steel. Eng., 16, 449-85, (1923). [Google Scholar]
  8. P.G. Fluck. The influence of surface roughness on fatigue life and scatter of test results of two steels. Proccedings ASTM, 51, 584-92, (1951). [Google Scholar]
  9. R. Konečná, M. Kokavec, G. Nicoletto. Surface conditions and the fatigue behavior of nodular cast iron. Procedia Eng., 10, 2538-43, 2011. [CrossRef] [Google Scholar]
  10. Y.L. Lee, ME Barkey, HT Kang. Metal Fatigue Analysis, Elsevier, (2012). [Google Scholar]
  11. D. Arola, C.L. Williams. Estimating the fatigue stress concentration factor of machined surfaces. Int. J. Fatigue, 24, 923-930, (2002). [CrossRef] [Google Scholar]
  12. M. Suraratchai, J. Lmido, C. Mabru, R. Chieragatti. Modelling the influence of machined Surface roughness on the fatigue life of aluminium alloy. Int. J. Fatigue, 30, 2119-2126, (2008). [CrossRef] [Google Scholar]
  13. ISO 4287: 1997. Geometrical Product Specifications (GPS)—Surface texture: Profile methoed—Terms, definitions and surface texture parameters. [Google Scholar]
  14. D. Novovic, R.C. Dewes, D.K. Aspinwall, W. Voice, P. Bowen. Effect of machined topography and integrity on fatigue life. Int. J. Mach. Tool Manu., 44, 125-34, (2004). [CrossRef] [Google Scholar]
  15. D. Socie, G. Marquis. Multiaxial Fatigue, SAE, Portland, OR, (2000). [CrossRef] [Google Scholar]
  16. S. Andrews, S. Huseyin. A computer model for fatigue crack growth from rough surfaces. Int. J. Fatigue, 22, 619-630, (2000). [CrossRef] [Google Scholar]
  17. D. Taylor, The theory of critical distances: a new perspective in fracture mechanics, Elsevier, (2010). [Google Scholar]
  18. K. Stout, L. Blunt. Three Dimensional Surface Topography. Butterworth-Heinemann, London, (2000). [Google Scholar]
  19. R.K. Leach. Characterisation of areal surface texture. Springer, (2013). [CrossRef] [Google Scholar]
  20. B. Bhushan. Introduction to tribology. John Wiley & Sons, (2013). [CrossRef] [Google Scholar]
  21. X. Jiang, P.J. Scott, D.J. Whitehouse, L. Blunt. Paradigm shifts in surface metrology. part i. historical philosophy. Proc. Royal Soc. A: Math. Phys. Eng. Sci., 463 (2085), 2071.2099, (2007). [CrossRef] [Google Scholar]
  22. ISO 25178-2 2012 Geometrical Product Specification (GPS)—Surface Texture: Areal (International Organisation for Standardization). [Google Scholar]
  23. K. Stout. The Development of Methods for the Characterisation of Roughness in Three Dimensions. Publisher, (1993). [Google Scholar]
  24. D.T. Ardi, YG. Li, L. Blunt, MR. Bache. Surface topography and the impact on fatigue performance. Surface Topography: Metrology and Properties, 3, 015007, (2015). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.