| Issue |
MATEC Web Conf.
Volume 165, 2018
12th International Fatigue Congress (FATIGUE 2018)
|
|
|---|---|---|
| Article Number | 02002 | |
| Number of page(s) | 6 | |
| Section | Additive Manufacturing | |
| DOI | https://doi.org/10.1051/matecconf/201816502002 | |
| Published online | 25 May 2018 | |
Influence of as-built surface on fatigue strength and notch sensitivity of Ti6Al4V alloy produced by DMLS
1
University of Parma, Parma, Italy
2
University of Žilina, Žilina, Slovakia
3
Institute of Physics of Materials, Brno, Czech Republic
* Corresponding author: gianni.nicoletto@unipr.it
Direct Metal Laser Sintering (DMLS) is one of the additive manufacturing technologies involving a metal powder bed and a laser source to obtain components of complex geometry. The fatigue life of an as-built DMLS part is negatively influenced by the rough surface compared to a machined surface. Since most DMLS components are expected to have also stress concentrations, here the combined effect on fatigue of a as-built surface and a geometrical notch in as-built DMLS Ti6Al4V was investigated using a new test methodology. Miniature specimens having three different directions with respect to build direction were fabricated and tested determining the directional fatigue notch sensitivity of as-built DMLS Ti6Al4V Optical inspection of notch surface quality and roughness measurements demonstrated a ranking of the directional notches that inversely correlated to the measured fatigue performance. The link among the curved surface orientation, the peculiar layer-wise additive manufacturing fabrication and the fatigue notch sensitivity is clarified.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.