Methods for Structural Stress Determination according to EN 13445-3 Annex NA – Comparison with other Codes for Unfired Pressure Vessels

Ralf Trieglaff; Jürgen Rudolph; Martin Beckert; Daniel Friers

doi:10.1051/matecconf/201816510003

All issues

Volume 165 (2018)

MATEC Web Conf., 165 (2018) 10003

References

Open Access

Issue		MATEC Web Conf. Volume 165, 2018 12^th International Fatigue Congress (FATIGUE 2018)


Article Number		10003
Number of page(s)		9
Section		Fatigue of Structures / Vibrations / in Service Fatigue Failures
DOI		https://doi.org/10.1051/matecconf/201816510003
Published online		25 May 2018

Hobbacher, A.: Recommendations for fatigue design of welded joints and components. IIW document IIW-1823-07 ex XII-2151r4-07/XV-1254r4-07, 2008. [Google Scholar]
Hobbacher, A.: Recommendations for Fatigue Design of welded joints and components. International Institute of Welding document IIW document IIW-1823-07. Welding Research Council Bulletin 520, New York (2009) [Google Scholar]
Hobbacher, A.: Recommendations for Fatigue Design of Welded Joints and Components. Second Edition. IIW document IIW-2259-15 ex XIII-2460-13/XV-1440-13, revision of XIII-2151r4-07/XV-1254r4-07, Springer Cham Heidelberg New York Dordrecht London, 2016 [CrossRef] [Google Scholar]
CEN/TC 54; EN 13445-3:2014/prA3:2015; 2015-10. Clause 18: „Detailed assessment of fatigue life “ Annex NA: „Instructions for determining structural hot-spot stress by finite element analysis using shell and brick elements “ Annex NB: „Cycle counting and determination of equivalent stress range “ [Google Scholar]
Rudolph, J.; Baylac, G.; Wilhelm, P.; Wintle, J.; Buennagel, E.: Recent Amendments of EN 13445-3, Clause 18 and Related Annexes: Detailed Assessment of Fatigue Life. Proceedings of PVP2014. Paper No. PVP2014-28129. ASME Pressure Vessels & Piping Conference. July 20-24, 2014, Anaheim, California, USA [Google Scholar]
Eurocode 3 - Design of steel structures - prEN 1993. European Committee for Standardization, Brussels, 1992 [Google Scholar]
Maddox, S. J.: Key developments in the fatigue design of welded constructions. 2003 IIW Portvin Lecture, Proc. IIW Int. Conf. on „Welded Construction for Urban Infrastructure “, ISIM, Timisoara, Romania, 2003. [Google Scholar]
Niemi, E.; Fricke, W.; Maddox, S. J.: Fatigue Analysis of welded Components - Designer’s guide to the structural hot-spot stress approach. IIW-1430-00, first published 2006, reprinted 2011 [Google Scholar]
J. Rudolph, M. Rauth, E. Weiβ: Modellgebundener Strukturspannungsnachweis für zyklisch beanspruchte Zylinder-Stutzen-Verbindungen ohne Schweiβnahtnachbearbeitung. TU-Zeitschrift 43 (2002), No. 6, pp. 19/26 [Google Scholar]
Haibach, E.: Die Schwingfestigkeit von Schweiβverbindungen aus der Sicht einer örtlichen Beanspruchungsmessung. (The fatigue strength of welded joints considered based on local stress measurement). LBF Report FB77, Fraunhofer-Inst. für Betriebsfestigkeit Darmstadt Germany (1968) [Google Scholar]
Hinnant, C.: Fatigue Testing and Life Estimates of Welded Flat Head Pressure Vessel Joints. Proceedings of PVP2006. Paper No. PVP2006-93967 [Google Scholar]
ASME Pressure Vessels & Piping Conference July 23-27, 2006, Vancouver, BC, Canada [Google Scholar]
Document CEN/TC 54 N 1715: Example of Application of EN 13445 - Vertical Vessel with Bracket Supports (Cen/Tr 13445-102), 10 February 2014 [Google Scholar]
Lidonnici, F.: The Simplified Method for Fatigue Assessment of the European Pressure Vessel Standard EN 13445, Proceedings of PVP2013. Paper No. PVP2013-97568, ASME Pressure Vessels & Piping Conference July 14-18, 2013, Paris, France [Google Scholar]
Trieglaff, R.; Rudolph, J.; Beckert, M.; Hauser, F.: Comparison of Methods for Structural Stress Determination according to EN13445-3 Annex NA Proceedings of PVP2017. Paper No. PVP2017-66112. ASME Pressure Vessels & Piping Conference. July 16-20, 2017, Hawaii, USA [Google Scholar]
Welding Research Council (WRC) bulletin 432 Fatigue strength reduction and stress concentration factors for welds in pressure vessels and piping, June 1998 [Google Scholar]
KTA Program of Standards, Standard No. 3201.2, Components of the Reactor Coolant Pressure Boundary of Light Water Reactors, Part 2: Design and Analysis, Issue November 2013 [Google Scholar]
ASME Boiler and Pressure Vessel Code Section III, Rules for Construction of Nuclear Facility Components, Div. 1 The American Society of Mechanical Engineers, New York, 2017 edition [Google Scholar]
EN 12952-3Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler; German version EN 12952-3:2011 [Google Scholar]
RCC-M, Design and Construction Rules for Mechanical Components of PWR Nuclear Islands, afcen, 2012 edition [Google Scholar]
AD 2000 Merkblatt S2 Analysis for cyclic loading German version TÜVIS Prüfgrundlagen, Edition 07.2012 [Google Scholar]
ASME Boiler and Pressure Vessel Code Section VIII-2, Rules for Construction of Pressure Vessels Division 2 - Alternative Rules The American Society of Mechanical Engineers, New York, 2017 edition [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] Hobbacher, A.: Recommendations for fatigue design of welded joints and components. IIW document IIW-1823-07 ex XII-2151r4-07/XV-1254r4-07, 2008. [Google Scholar]

[2] Hobbacher, A.: Recommendations for Fatigue Design of welded joints and components. International Institute of Welding document IIW document IIW-1823-07. Welding Research Council Bulletin 520, New York (2009) [Google Scholar]

[3] Hobbacher, A.: Recommendations for Fatigue Design of Welded Joints and Components. Second Edition. IIW document IIW-2259-15 ex XIII-2460-13/XV-1440-13, revision of XIII-2151r4-07/XV-1254r4-07, Springer Cham Heidelberg New York Dordrecht London, 2016 [CrossRef] [Google Scholar]

[4] CEN/TC 54; EN 13445-3:2014/prA3:2015; 2015-10. Clause 18: „Detailed assessment of fatigue life “ Annex NA: „Instructions for determining structural hot-spot stress by finite element analysis using shell and brick elements “ Annex NB: „Cycle counting and determination of equivalent stress range “ [Google Scholar]

[5] Rudolph, J.; Baylac, G.; Wilhelm, P.; Wintle, J.; Buennagel, E.: Recent Amendments of EN 13445-3, Clause 18 and Related Annexes: Detailed Assessment of Fatigue Life. Proceedings of PVP2014. Paper No. PVP2014-28129. ASME Pressure Vessels & Piping Conference. July 20-24, 2014, Anaheim, California, USA [Google Scholar]

[6] Eurocode 3 - Design of steel structures - prEN 1993. European Committee for Standardization, Brussels, 1992 [Google Scholar]

[7] Maddox, S. J.: Key developments in the fatigue design of welded constructions. 2003 IIW Portvin Lecture, Proc. IIW Int. Conf. on „Welded Construction for Urban Infrastructure “, ISIM, Timisoara, Romania, 2003. [Google Scholar]

[8] Niemi, E.; Fricke, W.; Maddox, S. J.: Fatigue Analysis of welded Components - Designer’s guide to the structural hot-spot stress approach. IIW-1430-00, first published 2006, reprinted 2011 [Google Scholar]

[9] J. Rudolph, M. Rauth, E. Weiβ: Modellgebundener Strukturspannungsnachweis für zyklisch beanspruchte Zylinder-Stutzen-Verbindungen ohne Schweiβnahtnachbearbeitung. TU-Zeitschrift 43 (2002), No. 6, pp. 19/26 [Google Scholar]

[10] Haibach, E.: Die Schwingfestigkeit von Schweiβverbindungen aus der Sicht einer örtlichen Beanspruchungsmessung. (The fatigue strength of welded joints considered based on local stress measurement). LBF Report FB77, Fraunhofer-Inst. für Betriebsfestigkeit Darmstadt Germany (1968) [Google Scholar]

[11] Hinnant, C.: Fatigue Testing and Life Estimates of Welded Flat Head Pressure Vessel Joints. Proceedings of PVP2006. Paper No. PVP2006-93967 [Google Scholar]

[12] ASME Pressure Vessels & Piping Conference July 23-27, 2006, Vancouver, BC, Canada [Google Scholar]

[13] Document CEN/TC 54 N 1715: Example of Application of EN 13445 - Vertical Vessel with Bracket Supports (Cen/Tr 13445-102), 10 February 2014 [Google Scholar]

[14] Lidonnici, F.: The Simplified Method for Fatigue Assessment of the European Pressure Vessel Standard EN 13445, Proceedings of PVP2013. Paper No. PVP2013-97568, ASME Pressure Vessels & Piping Conference July 14-18, 2013, Paris, France [Google Scholar]

[15] Trieglaff, R.; Rudolph, J.; Beckert, M.; Hauser, F.: Comparison of Methods for Structural Stress Determination according to EN13445-3 Annex NA Proceedings of PVP2017. Paper No. PVP2017-66112. ASME Pressure Vessels & Piping Conference. July 16-20, 2017, Hawaii, USA [Google Scholar]

[16] Welding Research Council (WRC) bulletin 432 Fatigue strength reduction and stress concentration factors for welds in pressure vessels and piping, June 1998 [Google Scholar]

[17] KTA Program of Standards, Standard No. 3201.2, Components of the Reactor Coolant Pressure Boundary of Light Water Reactors, Part 2: Design and Analysis, Issue November 2013 [Google Scholar]

[18] ASME Boiler and Pressure Vessel Code Section III, Rules for Construction of Nuclear Facility Components, Div. 1 The American Society of Mechanical Engineers, New York, 2017 edition [Google Scholar]

[19] EN 12952-3Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler; German version EN 12952-3:2011 [Google Scholar]

[20] RCC-M, Design and Construction Rules for Mechanical Components of PWR Nuclear Islands, afcen, 2012 edition [Google Scholar]

[21] AD 2000 Merkblatt S2 Analysis for cyclic loading German version TÜVIS Prüfgrundlagen, Edition 07.2012 [Google Scholar]

[22] ASME Boiler and Pressure Vessel Code Section VIII-2, Rules for Construction of Pressure Vessels Division 2 - Alternative Rules The American Society of Mechanical Engineers, New York, 2017 edition [Google Scholar]