Issue |
MATEC Web Conf.
Volume 165, 2018
12th International Fatigue Congress (FATIGUE 2018)
|
|
---|---|---|
Article Number | 21003 | |
Number of page(s) | 5 | |
Section | Welding | |
DOI | https://doi.org/10.1051/matecconf/201816521003 | |
Published online | 25 May 2018 |
Notch effect of welded joint
Faculty of Mechanical Engineering, Department of Applied Mechanics and Mechatronics, Námestie slobody 17, 812 31 Bratislava, Slovakia
* Corresponding author: vladimir.chmelko@stuba.sk
In general, the welded joints are multifactorial notches. This study is focused to separate the geometrical influence (when the weld can be seen on the surface) and technological factors (internal defects of the weld, structural changes of the material and residual stress) on its fatigue life. Proposed methodology of this separation comes out from the cyclic test of three specimens – group with existing weld, group without weld joint (base material) and another group where was removed outer geometry of the weld.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.