MATEC Web Conf.
Volume 162, 2018The 3rd International Conference on Buildings, Construction and Environmental Engineering, BCEE3-2017
|Number of page(s)||5|
|Section||Geotechnical and Transportation Engineering|
|Published online||07 May 2018|
- G. Miller, S. Azad. “Influence of Soil type on Stabilization with Cement Kiln Dust”. Construction and Building Materials Journal, 14, 89-97 (2000). [CrossRef] [Google Scholar]
- N. Attoh. “Lime Treatment of Laterite Soils and Gravels-Revisited” Construction and Building Materials Journal, 9, 283-287 (1995). [CrossRef] [Google Scholar]
- S. Lahalih, N. Ahmed. “Effect of New Soil Stabilizers on the Compressive Strength of Dune Sand”. Construction and Building Materials Journal, 12, 321-328 (1998). [CrossRef] [Google Scholar]
- J. Tingle, K. Newman, S. Larson, C. Weiss, J. Rushing. “Stabilization Mechanisms of Nontraditional Additives”. Transportation Reaearch Recordion: Journal of the Transportat Research Board 2, 59-67 (2007). [CrossRef] [Google Scholar]
- S. Naeini, B. Naderinia, E. Izadi. “Unconfined Compressive Strength of Clay Soils Stabilized with Waterborn Polymer”. KSCE Journal of Civil Engineering 16, 943-949 (2012). [CrossRef] [Google Scholar]
- N. Naderi, S. Naeini. “The Influence of Polymer Inclusion and Plasticity Index on the Unconfined Compression Strength of Clays”. 2nd International Conference on New Developments in Soil Mechanics and Geotechnical Engineering, Near East University, Nicosia, North Cyprus. (2009). [Google Scholar]
- D. Matzen, E. Straube. “Mechanical Properties of SBR-Networks: I. Determination of Crosslink Densities by Stress-Strain-Measurements”. Colloid and Polymer Science 270, 1-8(1992). [CrossRef] [Google Scholar]
- B. Badmus. “Plasticity and Compressibility Characteristics of Lateritic Soil from Southwestern Nigeria”. Research journal of soil and water management 1, 10-14(2010). [Google Scholar]
- Y. Atemimi, F. Ahmad. “Influence of New Liquid Stabilizer on strength of Residual soils”. The Iraqi Journal for Mechanical and Material Engineering, Special Volume, Babylon First International Engineering Conference, Issue (C), 436-449 (2015). [Google Scholar]
- ASTM. Annual Book of ASTM standards. ASTM International, West Conshohocken, PA, www.astm.org.,04-08(2005). [Google Scholar]
- BS. Methods of Test for Soils for Civil Engineering Purposes 1377 (1990). British Standards Institution 2 park street London W1A 2BS (2000). [Google Scholar]
- M. Muazu. “Evaluation of Plasticity and Particle Size Distribution Characteristics of Bagasse Ash on Cement Treated Lateritic Soil”. Leonardo Journal of Sciences 10, 137-152(2007). [Google Scholar]
- A. Olarewaju, M. Balogun, S. Akinlou. “Suitability of Eggshell Stabilized Lateritic Soil as Subgrade Material for Road Construction”. EJGE 16, 899-908(2011). [Google Scholar]
- Y. Bagheri, Y. Atemimi, F. Ahmad, M. Ismail. “Soil Strength improvement by using a new compound stabilizer”. Caspian Journal of Applied Sciences Research, 2 (AICCE’12 & GIZ’ 12), 84-90, (2013) [Google Scholar]
- A. Rahman. “The Potential of Some Stabilizers for the Use of Lateritic Soil in Construction”. Building and environmental Journal, 21, 57-61(1986). [CrossRef] [Google Scholar]
- S. Nayak, B. Sunil, S. Shrihari. “Hydraulic and Compaction Characteristics of leachate-Contaminated Lateritic Soil”. Engineering Geology 94, 137-144(2007). [CrossRef] [Google Scholar]
- M. AL-Tai, A. Mohamed Ali, B. Albdean. Improvement of Selected Parts of Basrah Governorate Soil Using Resorcinol Resin. Basra Journal of Science, 27, 1-16(2009). [Google Scholar]
- Y. Atemimi, Y. Bagheri, F. Ahmad. “The Influence of Soil Stabilization Techniques by Styrene Butadiene Rubber on the Soil Strength”. Awam International Conference on Civil Engineering (AICCE’12) Geohazard Information Zonation (GIZ’12) Park Royal Penang Resort, 28th-30th(2012). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.