Analysed statistically Modelling and Optimization of Laser Machining by Response Surface Methodology

Hani Mizhir; Kamil Jawad; Zuhair H Obaid

doi:10.1051/matecconf/201815305005

All issues

Volume 153 (2018)

MATEC Web Conf., 153 (2018) 05005

References

Open Access

Issue		MATEC Web Conf. Volume 153, 2018 The 4^th International Conference on Mechatronics and Mechanical Engineering (ICMME 2017)


Article Number		05005
Number of page(s)		5
Section		Modeling and Simulation of Mechanical System
DOI		https://doi.org/10.1051/matecconf/201815305005
Published online		26 February 2018

Choudhury, I. A., & Shirley, SLaser cutting of polymeric materials: An experimental investigation. Optics & Laser Technology, 42(3), 503-508. (2010). [CrossRef] [Google Scholar]
Eltawahni, H. A., Hagino, M., Benyounis, K. Y., Inoue, T., & Olabi, A. G. Effect of CO2 laser cutting process parameters on edge quality and operating cost of AISI316L. 44(4), 1068-1082. (2012). [Google Scholar]
Madić, M., Radovanović, M., & Nedić, B. Correlation between Surface Roughness Characteristics in CO2 Laser Cutting of Mild Steel. Tribology in Industry vol. 34, No. 4. (2012). [Google Scholar]
Samant, A. N., & Dahotre, N. B. Laser machining of structural ceramics: a review. Journal of the European Ceramic Society, 29(6), 969-993. (2009). [CrossRef] [Google Scholar]
Tulasiramarao, B., Srinivas, K., Effect of Processing Parameters on Surface Finish of the Components Processed By CNC Turning Machine. IJMEAR. Vol 04, Issue 01. (2013), [Google Scholar]
Dubey, A. K., & Yadava, V. Laser beam machining: a review. International Journal of Machine Tools and Manufacture, 48(6), 609-628. (2008). [Google Scholar]
Samant, A. N., & Dahotre, N. B. (2009). Laser machining of structural ceramics: a review. Journal of the European Ceramic Society, 29(6), 969-993 [CrossRef] [Google Scholar]
Ghany KA, Newish M. Cutting of1.2 mm thick austenitic stainless steel sheet using pulsed and CWNd:YAG laser. Journal of Materials Processing Technology; 168:438-47. (2005). [CrossRef] [Google Scholar]
Gok, A., Gologlu, C., Demirci, H. I., & Kurt, M. Determination of Surface Qualities on Inclined Surface Machining with Acoustic Sound Pressure. Strojniški vestnik - Journal of Mechanical Engineering, 58(10), 587-597. (2012). [CrossRef] [Google Scholar]
Eltawahni H. A., A. G. Olabi, and K. Y. Benyounis, 2011. “Investigating the CO2 laser cutting parameters of MDF wood composite material,” Optics & Laser Technology, vol. 43, no. 3, pp. 648-659, Apr. (2011). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] Choudhury, I. A., & Shirley, SLaser cutting of polymeric materials: An experimental investigation. Optics & Laser Technology, 42(3), 503-508. (2010). [CrossRef] [Google Scholar]

[2] Eltawahni, H. A., Hagino, M., Benyounis, K. Y., Inoue, T., & Olabi, A. G. Effect of CO2 laser cutting process parameters on edge quality and operating cost of AISI316L. 44(4), 1068-1082. (2012). [Google Scholar]

[3] Madić, M., Radovanović, M., & Nedić, B. Correlation between Surface Roughness Characteristics in CO2 Laser Cutting of Mild Steel. Tribology in Industry vol. 34, No. 4. (2012). [Google Scholar]

[4] Samant, A. N., & Dahotre, N. B. Laser machining of structural ceramics: a review. Journal of the European Ceramic Society, 29(6), 969-993. (2009). [CrossRef] [Google Scholar]

[5] Tulasiramarao, B., Srinivas, K., Effect of Processing Parameters on Surface Finish of the Components Processed By CNC Turning Machine. IJMEAR. Vol 04, Issue 01. (2013), [Google Scholar]

[6] Dubey, A. K., & Yadava, V. Laser beam machining: a review. International Journal of Machine Tools and Manufacture, 48(6), 609-628. (2008). [Google Scholar]

[7] Samant, A. N., & Dahotre, N. B. (2009). Laser machining of structural ceramics: a review. Journal of the European Ceramic Society, 29(6), 969-993 [CrossRef] [Google Scholar]

[8] Ghany KA, Newish M. Cutting of1.2 mm thick austenitic stainless steel sheet using pulsed and CWNd:YAG laser. Journal of Materials Processing Technology; 168:438-47. (2005). [CrossRef] [Google Scholar]

[9] Gok, A., Gologlu, C., Demirci, H. I., & Kurt, M. Determination of Surface Qualities on Inclined Surface Machining with Acoustic Sound Pressure. Strojniški vestnik - Journal of Mechanical Engineering, 58(10), 587-597. (2012). [CrossRef] [Google Scholar]

[10] Eltawahni H. A., A. G. Olabi, and K. Y. Benyounis, 2011. “Investigating the CO2 laser cutting parameters of MDF wood composite material,” Optics & Laser Technology, vol. 43, no. 3, pp. 648-659, Apr. (2011). [CrossRef] [Google Scholar]