Open Access
MATEC Web Conf.
Volume 78, 2016
2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016)
Article Number 01044
Number of page(s) 7
Published online 07 October 2016
  1. A.K.M. Mohiuddin, M. Nurhafez, International Journal of Mechanical and Materials Engineering, 2, 1 (2007) [Google Scholar]
  2. M.A. Kalam, H.H. Masjuki, M. Redzuan, M.A. Fuad, M. Mohibah, K.H. Halim, M.I. Mahlia, A. Ishak, A. Yusoff, Sadhana Acad. P. Eng. S., 34, 467 (2009) [CrossRef] [Google Scholar]
  3. S. Chuepeng, American Journal of Applied Sciences 9(8), 1225 (2012) [CrossRef] [Google Scholar]
  4. M. Mansha, A.H. Qureshi, I.A. Chaudry, E.M. Shahid, J. Qual. Technol., 9(1), 57 (2013) [Google Scholar]
  5. K. Hakan, Ind. Lubr. Tribol., 53(6), 237 (2001) [CrossRef] [Google Scholar]
  6. S.R. Koteswara, R. Imam, K. Ramanathan, S. Pushpavanam, Ind. Eng. Chem. Res., 48(8), 3779 (2009) [CrossRef] [Google Scholar]
  7. M. Mansha, E.M. Shahid, A.H. Qureshi, Pak, J. Engg. & Appl. Sci., 11, 114 (2012) [Google Scholar]
  8. N. Gallopoulos. SAE Technical Paper, 920721 (1992) [Google Scholar]
  9. D. Boam, T. Clark, K. Hobbs. SAE Technical Paper, 950930 (1995) [Google Scholar]
  10. V. Ganessan, Internal Combustion Engine (McGraw Hill, New Delhi, 2004) [Google Scholar]
  11. R.M. Heck, R.J. Farrauto, Catalytic Air Pollution Control (John Wiley & Sons, New York, 2009) [Google Scholar]
  12. S.E. Golunski, Platinum Metals Review., 51(3), 162 (2007) [CrossRef] [Google Scholar]
  13. H. Shahar, Amran Ab. Majib, Malaysian Journal of Analytical Sciences, 11(1), 145 (2007) [Google Scholar]
  14. K. Ravindra, L. Bencs, R.V. Grieken, Sci. Total Environ., 318(1-3), 1 (2004) [CrossRef] [Google Scholar]
  15. R.M. Bagus Irawan, P. Purwanto, H. Hadiyanto, Procedia Environmental Sciences, 23, 86 (2015) [CrossRef] [Google Scholar]
  16. H. Bode, W. Maus, H. Swars, 17th International Engine Symposium, Vienna, (1996) [Google Scholar]
  17. Kamariah Noor Ismail, Ku Halim Ku Hamid, Sharifah Aishah S. A. Kadir, Mohibah Musa, Robert Mikhail Savory, The Malaysian Journal of Analytical Sciences, 11(1), 246 (2007) [Google Scholar]
  18. A. Firdianto, Ultrasonic Treatment With Nickel Electroplating Combined With Oxidation For Developing Gamma-Al2O3 Washcoat On Fe-Cr-Al Substrate (Diss UTHM, Batu Pahat, 2012). [Google Scholar]
  19. G.B. Froment, K.B. Bischoff, Chemical Reactor Analysis and Design (Wiley, New York, 1990) [Google Scholar]
  20. J.A.M. Kuipers, W.P.M. Van Swaaij, Advances in Chemical Engineering, 24, 227 (1998) [CrossRef] [Google Scholar]
  21. J.G. Eriksson, T.F. Mckenna, Ind. Eng. Chem. Res., 43, 7251 (2004) [CrossRef] [Google Scholar]
  22. Darwin Sebayang, Yanuandri Putrasari, Sulaiman Hasan, Mohd Ashraf Othman, Pudji Untoro, Preparation of NiO Catalyst on FeCrAl Substrate Using Various Techniques at Higher Oxidation Process, Electroplating (INTECH, Crotia, 2012) [Google Scholar]
  23. C. Syed Aalam, C.G. Saravanan, C. Mohamed Samath, International Journal For Research In Emerging Science And Technology, 2(7), 17 (2015) [Google Scholar]
  24. R.E. Hayes, S.T. Kolaczkowski, Introduction to Catalytic Combustion (CRC Press, Amsterdam, 1998). [Google Scholar]
  25. Mesut Durat, Zekeriya Parlak, Murat Kapsiz, Adnan Parlak, Ferit Fiçici, Journal of Thermal Science and Technology, 33(2), 89 (2013) [Google Scholar]
  26. K. Mohan Laxmi, V. Ranjith Kumar, Y.V. Hanumantha Rao, International Journal of Engineering Research and Applications, 3(3), 518 (2013) [Google Scholar]
  27. M.S. Simon Martinez, D. Ruben, A. Leal-Garza Fausto, Sanchez Cruz, Esteban Baez Villarreal, Journal of KONES., 17(4), 303 (2010) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.