EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 67 (2016) MATEC Web Conf., 67 (2016) 06057 References
Open Access
Issue
MATEC Web Conf.
Volume 67, 2016
International Symposium on Materials Application and Engineering (SMAE 2016)
Article Number 06057
Number of page(s) 5
Section Chapter 6 Materials Science
DOI https://doi.org/10.1051/matecconf/20166706057
Published online 29 July 2016
  1. Fu SY, Lauke B, Mäder E, Yue CY, Hu X. Tensile properties of short-glass-fiber-and short-carbon-fiber-reinforced polypropylene composites[J]. Composites Part A: Applied Science and Manufacturing, 2000, 31: 1117–1125. [CrossRef] [Google Scholar]
  2. Gulrez S K, Mohsin M A, Al-Zahrani S. Studies on crystallization kinetics, microstructure and mechanical properties of different short carbon fiber reinforced polypropylene (SCF/PP) composites[J]. Journal of Polymer Research, 2013, 20: 1–9. [CrossRef] [Google Scholar]
  3. Ran Hongmeng, Liao Qiuhui, Tao Zhengang, Lian Daojun, Zhang Yishun, Wu Huijun. Research on Mechanical Properties of Carbon Fiber Reinforced PP Composites[J]. Engineering Plastics Application, 2015, 41: 47–50 [in Chinese]. [Google Scholar]
  4. Wang W, Zhao G, Guan Y, Wang J, Wang C. Study on effects of short glass fiber reinforcement on the mechanical and thermal properties of PC/ABS composites[J]. Journal of applied polymer science, 2014; 131(17): 40697. [Google Scholar]
  5. Nayak S K, Mohanty S. Sisal glass fiber reinforced PP hybrid composites: Effect of MAPP on the dynamic mechanical and thermal properties[J]. Journal of Reinforced Plastis and Composite, 2010, 29: 1551–1568. [CrossRef] [Google Scholar]
  6. Zhang S, Minus M L, Zhu L, Wong C-P, Kumar S. Polymer transcrystallinity induced by carbon nanotubes[J]. Polymer, 2008, 49: 1356–1364. [CrossRef] [Google Scholar]
  7. Saujanya C, Radhakrishnan S. Structure development and properties of PET fibre filled PP composites[J]. Polymer, 2001, 42: 4537–4548. [CrossRef] [Google Scholar]
  8. Bo Yang, Ling Sun. Influence of Processing Parameters on Short Glass Fiber Reinforced PP Injection Part Warpage [J]. CHINA PLASTICS, 2015, 1: 90–94. [Google Scholar]
  9. Aihua Xiong, Hesheng Liu, Xingyuan Huang, Yibin Huang, Qingsong Jiang, Jiamei Lai. Influence of Processing Parameters on Injection Pressure and Warpage of Short-Glass Fiber Reinforced PP Injection-Molded Part [J]. POLYMER MATERIALS SCIENCE AND ENGINEERING, 2012, 28: 163–168. [Google Scholar]
  10. Chen D, Lu G, He L, Li W, Yuan J Warpage of injection-molded automotive B pillar trim fabricated with ramie fiber-reinforced polypropylene composites[J]. Journal of Reinforced Plastics and Composites, 2015: 1144–1152. [CrossRef] [Google Scholar]
  11. Zuo Daping, Zhang Yihua, Rui Yulong. STUDY ON WARPAGE OF PA66/GF PART[J]. Engineering Plastics Application, 2006, 33: 23–25. [Google Scholar]
  12. HE Fangfang, Zhou Zhou, Jiang Bingyan. Prediction of melt flowability and fiber orientation for fiber reinforced polymer injection molding [J]. Acta Materiae Compositae Sinica, 2013, 1.128–133 [Google Scholar]
  13. Kim J, Kim H, Lee D. Study on fibre orientation of weld line parts during injection moulding of fibre reinforced plastic by image processing[J]. Materials Research Innovations, 2011, 15: 303–306. [CrossRef] [Google Scholar]
  14. Qiu Bin, Chen Feng.FIBREORIENTATION IN INJECTION MOULDING [J]. MODERN PLASTICS PROCESSING AND APPLICATIONS, 2005, 17: 50–52. [Google Scholar]
  15. Mortazavian S, Fatemi A. Effects of Fiber Orientation and Anisotropy on Tensile Strength and Elastic Modulus of Short Fiber Reinforced Polymer Composites[J]. Composites Part B: Engineering, 2015. 72: 116–129. [Google Scholar]
  16. YANG Jie, GAO Meng-luan, LI Zhi-tong, YIN Jing-jing, YAO Wen-hong, MA Ming-tu. Simulation of Injection Molding Process for Long /Short Fiber Reinforced Thermoplastic Composites [J]. CHINA PLASTICS INDUSTRY, 2015, 43: 81–84. [Google Scholar]
  17. Sharma R, Maiti S. Effects of crystallinity of polypropylene (PP) on the mechanical properties of PP/styrene-ethylene-butylene-styrene-g-maleic anhydride (SEBS-g-MA)/teak wood flour (TWF) composites[J]. Polymer Bulletin, 2015, 72: 627–643. [CrossRef] [Google Scholar]
  18. Choi J K, Lee B W, Choi Y S, Jo B W, Choi S K. Reinforcing properties of poly (trimethyleneterephthalate) by a thermotropic liquid crystal polymer[J]. Journal of applied polymer science, 2015, 132(5):41408. [Google Scholar]
  19. LI Jing, SHEN Shijie, LI Weina, YUAN Hui. Effects of acid modification on coupling agent amount of basalt fiber surface and mechanical property of BF/epoxy composites [J]. Acta Materiae Compositae Sinica, 31: 888–894. [Google Scholar]
  20. Varga J, Karger-Kocsis J. Interfacial morphologies in carbon fibre-reinforced polypropylene microcomposites[J]. Polymer, 1995, 36: 4877–4881. [CrossRef] [Google Scholar]
  21. Wu C-M, Chen M, Karger-Kocsis J. Interfacial shear strength and failure modes in sPP/CF and iPP/CF microcomposites by fragmentation[J]. Polymer, 2001, 42: 129–135. [CrossRef] [Google Scholar]
  22. Sun X, Li H, Wang J, Yan S. Shear-induced interfacial structure of isotactic polypropylene (iPP) in iPP/fiber composites[J]. Macromolecules, 2006, 39: 8720–8726. [CrossRef] [Google Scholar]
  23. Wang K, Guo M, Zhao D, Zhang Q, Du R, Fu Q, Dong X, Han C C. Facilitating transcrystallization of polypropylene/glass fiber composites by imposed shear during injection molding[J]. Polymer, 2006, 47: 8374–8379. [CrossRef] [Google Scholar]
  24. Zhao Xu, Xie Mancun, Sun Weidong, Zheng Guoqiang. Research Progress on interface β-transcrystallization in Fiber Reinforced Isotactic Polypropylene Composites [J]. Plastics Science and Technology, 2011, 39: 90–93. [Google Scholar]
  25. Ji C, Xie M, Chang B, Dai K, Wang B, Zheng G, Liu C, Shen C. β-Crystal in injection moulded poly (ethylene terephthalate) fibre/isotactic polypropylene composite[J]. Composites Part A: Applied Science and Manufacturing, 2013, 46: 26–33. [CrossRef] [Google Scholar]
  26. Stan F, Sandu L I, Fetecau C. Effect of processing parameters and strain rate on mechanical properties of carbon nanotube–filled polypropylene nanocomposites[J]. Composites Part B: Engineering, 2014, 59: 109–122. [CrossRef] [Google Scholar]
  27. Panaitescu D M, Vuluga Z, Ghiurea M, Iorga M, Nicolae C, Gabor R. Influence of compatibilizing system on morphology, thermal and mechanical properties of high flow polypropylene reinforced with short hemp fibers[J]. Composites Part B: Engineering, 2015, 69: 286–295. [CrossRef] [Google Scholar]
  28. LI Zheng-hong, CHEN Li-hui, HUANG Zu-tai. Dynamic Mechanical Thermal Analysis of Nylon Composite Reinforced with Bamboo Fiber [J]. Transactions of China Pulp and Paper, 2005, 20: 13–17. [Google Scholar]
  29. Khattab A, Liu C, Chirdon W, et al. Mechanical and thermal characterization of carbon nanofiber reinforced low-density polyethylene composites[J]. Journal of Thermoplastic Composite Materials, 2013, 26(7):954–967. [CrossRef] [Google Scholar]
  30. Ning N, Fu S, Zhang W, Chen F, Wang K, Deng H, Zhang Q, Fu Q. Realizing the enhancement of interfacial interaction in semicrystalline polymer/filler composites via interfacial crystallization[J]. Progress in Polymer Science, 2012, 37: 1425–1455. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.