Open Access
Issue
MATEC Web Conf.
Volume 66, 2016
The 4th International Building Control Conference 2016 (IBCC 2016)
Article Number 00009
Number of page(s) 8
DOI https://doi.org/10.1051/matecconf/20166600009
Published online 13 July 2016
  1. Abdul‐Aziz A. R., & Wong S. S. (2010). Exploring the internationalization of Malaysian contractors: The international entrepreneurship dimension. Construction Management and Economics, 28(1), 51–61. doi: 10.1080/01446190903460680 [CrossRef] [Google Scholar]
  2. Acha V., Gann D. M., & Salter A. J. (2005). Episodic innovation: R&D strategies for project‐based environments. Industry and Innovation, 12(2), 255–281. doi: 10.1080/13662710500087990 [CrossRef] [Google Scholar]
  3. Arditi D., Kale S., & Tangkar M. (1997). Innovation in construction equipment and its flow into the construction industry. Journal of Construction Engineering and Management, 123(4), 371–378. doi: 10.1061/(ASCE)0733-9364(1997)123:4(371) [CrossRef] [Google Scholar]
  4. Bossink B. A. G. (2004). Managing drivers of innovation in construction networks. Journal of Construction Engineering and Management, 130(3), 337. doi: 10.1061/(ASCE)0733-9364(2004)130:3(337) [CrossRef] [Google Scholar]
  5. El-Mashaleh M., O’Brien W. J., & Minchin Jr, R. E. (2006). Firm performance and information technology utilization in the construction industry. Journal of Construction Engineering and Management, 132(5), 499–507. doi: 10.1061/(ASCE)0733-9364(2006)132:5(499) [CrossRef] [Google Scholar]
  6. Gann D. M., & Salter A. J. (2000). Innovation in project-based, service-enhanced firms: The construction of complex products and systems. Research Policy, 29(7-8), 955–972. doi: 10.1016/S0048-7333(00)00114-1 [CrossRef] [Google Scholar]
  7. Hsieh H.-F., & Shannon S. E. (2005). Three approaches to qualitative content analysis. Qualitative Health Research, 15(9), 1277–1288. doi: 10.1177/1049732305276687 [CrossRef] [PubMed] [Google Scholar]
  8. Koskela L. J., & Vrijhoef R. (2001). Is the current theory of construction a hindrance to innovation? Building Research & Information, 29(3), 197–207. doi: 10.1080/09613210110039266 [CrossRef] [Google Scholar]
  9. Lim J. Y. (2006). Stimulating construction innovation in Singapore by developing the national system of innovation. (PhD Dissertation), National University of Singapore, Singapore. [Google Scholar]
  10. Ling F. Y. Y. (2003). Managing the implementation of construction innovations. Construction Management and Economics, 21(6), 635–649. doi: 10.1080/0144619032000123725 [CrossRef] [Google Scholar]
  11. Malerba F. (2002). Sectoral systems of innovation and production. Research Policy, 31(2), 247–264. doi: 10.1016/S0048-7333(01)00139-1 [CrossRef] [Google Scholar]
  12. Malerba F. (2004). Sectoral systems of innovation: Concepts, issues and analyses of six major sectors in Europe. Cambridge, UK: Cambridge University Press. [CrossRef] [Google Scholar]
  13. Malerba F. (2006). Innovation and the evolution of industries. Journal of Evolutionary Economics, 16(1), 3–23. doi: 10.1017/CBO9780511493270 [CrossRef] [Google Scholar]
  14. Malerba F. (2007, September). Catching up in different sectoral systems. Paper presented at the GLOBELICS International Conference: Regional and National Innovation Systems for Development, Competitiveness and Welfare: the Government-Academia-Industry Partnership, Saratov State Technical University, Saratov. http://csh.xoc.uam.mx/EII/globelicswp/wpg0801.pdf. [Google Scholar]
  15. Malerba F., & Nelson R. R. (2011). Learning and catching up in different sectoral systems: Evidence from six industries. Industrial and Corporate Change, 20(6), 1645–1675. doi: 10.1093/icc/dtr062 [CrossRef] [Google Scholar]
  16. Nelson R. R. (2008). What enables rapid economic progress: What are the needed institutions? Research Policy, 37(1), 1–11. doi: 10.1016/j.respol.2007.10.008 [CrossRef] [Google Scholar]
  17. Oakland J. S., & Marosszeky M. (2006). Total quality in the construction supply chain. Burlington, MA: Butterworth-Heinemann. [Google Scholar]
  18. Reichstein T., Salter A. J., & Gann D. M. (2005). Last among equals: A comparison of innovation in construction, services and manufacturing in the UK. Construction Management and Economics, 23(6), 631–644. doi: 10.1080/01446190500126940 [CrossRef] [Google Scholar]
  19. Samuelsson P. (2003). Improvement processes in construction companies. In Atkin B., Borgbrant J. & Josephson P. E. (Eds.), Construction process improvement (pp. 225–239). Oxford, UK: Blackwell Science [CrossRef] [Google Scholar]
  20. Schumpeter J. A. (1961). The theory of economic development: An inquiry into profits, capital, credit, interest, and the business cycle. (R. Opie, Trans.). New York: Oxford University Press. (Original work published 1934). [Google Scholar]
  21. Seaden G., Guolla M., Doutriaux J., & Nash J. (2003). Strategic decisions and innovation in construction firms. Construction Management and Economics, 21(6), 603–612. doi: 10.1080/0144619032000134138 [CrossRef] [Google Scholar]
  22. Shapiro G. (1999). Inter-project knowledge capture and transfer: An overview of definitions, tools and practices CoPS Innovation Centre Working Paper No. 62 (pp. 42). Brighton: CoPS. http://www.researchgate.net/publication/253518640_InterProject_Knowledge_Capture_and_Transfer_An_Overview_of_Definitions_Tools_and_Practices [Google Scholar]
  23. Slaughter E. S. (1998). Models of construction innovation. Journal of Construction Engineering and Management, 124(3), 226–231. doi: 10.1061/(ASCE)0733-9364(1998)1243(226) [CrossRef] [Google Scholar]
  24. Tether B. S., & Metcalfe J. S. (2004). Services and systems of innovation. In Malerba F. (Ed.), Sectoral systems of innovation: Concepts, issues and analyses of six major sectors in Europe. Cambridge, UK: Cambridge University Press. [Google Scholar]
  25. Thomas S. R., Lee S.-H., Spencer J. D., Tucker R. L., & Chapman R. E. (2004). Impacts of design/information technology on project outcomes. Journal of Construction Engineering and Management, 130(4), 586–597. doi: 10.1061/(ASCE)0733-9364(2004)130:4(586) [CrossRef] [Google Scholar]
  26. Toole T. M. (1998). Uncertainty and home builders’ adoption of technological innovations. Journal of Construction Engineering and Management, 124(4), 323–332. doi: 10.1061/(ASCE)0733-9364(1998)124:4(323) [CrossRef] [Google Scholar]
  27. Toole T. M., Hallowell M., & Chinowsky P. (2013). A tool for enhancing innovation in construction organizations. Engineering Project Organization Journal, 3(1), 32–50. doi: 10.1080/21573727.2012.717531 [CrossRef] [Google Scholar]
  28. Veblen T. (1898). Why is economics not an evolutionary science? The Quarterly Journal of Economics, 12(4), 373–397. doi: 10.2307/1882952 [CrossRef] [Google Scholar]
  29. Widén K. (2006). Innovation diffusion in the construction sector. (PhD Dissertation), Lund University, Lund. [Google Scholar]
  30. Widén K. (2010). Construction Innovation: Statsbygg, the Driving Client. Lund, Sweden: Division of Construction Management, Lund University. [Google Scholar]
  31. Yin R. K. (2014). Case study research: Design and methods (5th ed.). Los Angeles: Sage. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.