Open Access
Issue
MATEC Web of Conferences
Volume 45, 2016
2016 7th International Conference on Mechatronics and Manufacturing (ICMM 2016)
Article Number 04012
Number of page(s) 5
Section Machinery manufacturing and automation
DOI https://doi.org/10.1051/matecconf/20164504012
Published online 15 March 2016
  1. Bayati I., Belloli M., Ferrari D., Fossati F. & Giberti H., “Design of a 6-DoF robotic platform for wind tunnel tests of floating wind turbines”, Energy Procedia, pp. 313 (2014). [CrossRef]
  2. Merlet J. P., Parallel Robots, Springer, (2006).
  3. Bonev I. A., Mechanism and Machine Theory, 36, 1 (2001). [CrossRef]
  4. Merlet J. P., Gosselin C., Handbook of Robotics, (2008).
  5. Legnani G., Tosi D., Fassi I., Giberti H., Cinquemani S., “The “point of isotropy” and other properties of serial and parallel manipulators”, Mechanism and Machine Theory, vol. 45, no. 10, pp. 1407–1423, (2010). [CrossRef]
  6. Legnani G., Fassi I., Giberti H., Cinquemani S., Tosi D., “A new isotropic and decoupled 6-DoF parallel manipulator”, Mechanism and Machine Theory, vol. 58, pp. 64–81 (2012). [CrossRef]
  7. Fassi I., Legnani G., Tosi D., “Geometrical conditions for the design of partial or full isotropic hexapods”, Journal of Robotic Systems, vol. 22, no. 10, pp. 507–518, (2005). [CrossRef]
  8. Cinquemani S., Ferrari D., “A genetic algorithm optimization for IMSC technique”, 2014 IEEE Conference on Control Applications, CCA 2014, pp. 1942.
  9. Giberti H., Ferrari D., “A novel hardware-in-the-loop device for floating offshore wind turbines and sailing boats”, Mechanism and Machine Theory, vol. 85, pp. 82–105, (2015). [CrossRef]
  10. Giberti H., Cinquemani S., Legnani G., “A practical approach to the selection of the motor-reducer unit in electric drive systems”, Mechanics Based Design of Structures and Machines, vol. 39, no. 3, pp. 303–319, (2011). [CrossRef]
  11. Giberti H., Cinquemani S., Legnani G., “Effects of transmission mechanical characteristics on the choice of a motor-reducer”, Mechatronics, vol. 20, no. 5, pp. 604–610, (2010). [CrossRef]
  12. Giberti H., Ferrari D., Fiore E., “Dynamics Modeling and Accuracy Evaluation of a 6-DoF Hexaslide Robot”, Conference Proceedings of the Society for Experimental Mechanics Series, vol. 1, pp. 473, (2015).
  13. Tarabini M., Roure A., Pinhede C. Active control of noise on the source side of a partition to increase its sound isolation (2009) Journal of Sound and Vibration, 320 (4-5), pp. 726–743 [CrossRef]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.