Open Access
Issue
MATEC Web of Conferences
Volume 14, 2014
EUROSUPERALLOYS 2014 – 2nd European Symposium on Superalloys and their Applications
Article Number 07001
Number of page(s) 6
Section Session 7: Process - Microstructure Interactions
DOI https://doi.org/10.1051/matecconf/20141407001
Published online 29 August 2014
  1. R. B. Thompson and D. O. Thompson: Proc. IEEE, 1985, vol. 73, pp. 1716–55 [CrossRef] [Google Scholar]
  2. J. P. Monchalin: Rev. Quant. Nondestruct. Eval., 2004, vol. 23, pp. 3–31 [CrossRef] [Google Scholar]
  3. A Moreau, D Lévesque, M Lord, M Dubois, J P Monchalin, C Padioleau, and J F Bussière: Ultrasonics, 2002, vol. 40, pp. 1047–56 [CrossRef] [Google Scholar]
  4. M. Dubois, M. Militzer, A. Moreau, and J. F. Bussière: Scripta. Mater., 2000, vol. 42, pp. 867–74 [CrossRef] [Google Scholar]
  5. S. Kruger, G. Lamouche, J.P. Monchalin, R. Kolark, G. Jeskey, and M. Choquel: Iron Steel Technol., 2005, vol. 2, pp. 25–31 [Google Scholar]
  6. S. Sarkar, A. Moreau, M. Militzer, and W.J. Poole: Metall. Mater. Trans. A, 2008, vol. 39, pp. 897–907 [CrossRef] [Google Scholar]
  7. M. Maalekian, R. Radis, M. Militzer, A. Moreau, and W.J. Poole: Acta Mater., 2012, vol. 60, pp. 1015–26 [CrossRef] [Google Scholar]
  8. S.E. Kruger and E.B. Damm: Mater. Sci. Eng. A, 2006, vol. 425, pp. 238–43 [Google Scholar]
  9. S.E. Kruger, S. Bolognini, G. Lamouche, and A. Moreau: in Quant. Nondestruct. Eval. AIP Conf. Proceedings, Vol. 615, AIP, 2002, pp. 1518–25 [CrossRef] [Google Scholar]
  10. S.E. Kruger, A. Moreau, M. Militzer, and T. Biggs: Mater. Sci. Forum, 2003, vol. 426, pp. 483–488 [CrossRef] [Google Scholar]
  11. A. Moreau, C. Bescond, S. Bolognini, M. Lord, S.E. Kruger, and C.S. Man: Automation & Control/ Advanced OnLine Metallurgical Models/Sensors, 2005, Materials Science & Technology, pp. 3–10 [Google Scholar]
  12. A. Moreau, P.J. Kielczynski, J.F. Buissiere, and J.H. Root: in Nondestruct. Charact. Mater. VI, R.E. Green, ed., Plenum Press, New York, 1994, pp. 119–128 [CrossRef] [Google Scholar]
  13. R. C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, 2006, p. 372 [Google Scholar]
  14. B. Geddes, H. Leon, and X. Huang: Superalloys: Alloying and Performance, ASM International, 2010, p. 176 [Google Scholar]
  15. R. Cozar and A. Pineau: Metall. Trans., 1973, vol. 4, pp. 47–59 [CrossRef] [Google Scholar]
  16. M.S. Lewandowski and R.A. Overfelt: Acta Mater., 1999, vol. 47, pp. 4695–4710 [CrossRef] [Google Scholar]
  17. R. A. P. Djaic and J. J. Jonas: Metall. Trans., 1973, vol. 4, pp. 621–24 [CrossRef] [Google Scholar]
  18. N.K. Park, I.S. Kim, Y.S. Na, and J.T. Yeom: J. Mater. Process. Technol., 2001, vol. 111, pp. 98–102 [CrossRef] [Google Scholar]
  19. N. Spath, V. Zerrouki, P. Poubanne, and J.Y. Guedou: in Superalloys 718, 625, 706 Var. Deriv., E.A. Loria, ed., TMS, 2001, pp. 173–83 [CrossRef] [Google Scholar]
  20. D. Zhao and P.K. Chaudhury: in Superalloys 718, 625, 706 Var. Deriv., TMS, Warrendale, PA, 1994, pp. 301–13 [Google Scholar]
  21. H. Yuan and W.C. Liu: Mater. Sci. Eng. A, 2005, vol. 408, pp. 281–89 [Google Scholar]
  22. S.C. Medeiros, Y.V.R.K. Prasad, W.G. Frazier, and R Srinivasan: Mater. Sci. Eng. A, 2000, vol. 293, pp. 198–207 [CrossRef] [Google Scholar]
  23. J. De Jaeger, “Contribution à l'étude mésoscopique de la recristallisation dynamique de l'Inconel 718 lors du forgeage à chaud: Approches expérimentale et numérique”, Ph.D. Dissertation, Ecole Centrale Paris (2013) [Google Scholar]
  24. R.K. Ing and J.P. Monchalin: Appl. Phys. Lett., 1991, vol. 59, pp. 3233–35 [CrossRef] [Google Scholar]
  25. S. Azadian, L.Y. Wei, and R. Warren: Mater. Charact., 2004, vol. 53, pp. 7–16 [CrossRef] [Google Scholar]
  26. D. Cai, W. Zhang, P. Nie, W. Liu, and M. Yao: Mater. Charact., 2007, vol. 58, pp. 220–25 [CrossRef] [Google Scholar]
  27. A.W. Dix, J.M. Hyzak, and R.P. Singh: in Superalloys 1992, E.A. Loria, ed., TMS, Warrendale, PA, 1992, pp. 23–32 [Google Scholar]
  28. E.P. Papadakis: J. Acoust. Soc. Am., 1965, vol. 37, pp. 703–10 [CrossRef] [Google Scholar]
  29. F.E. Stanke and G.S. Kino: J. Acoust. Soc. Am., 1984, vol. 75, pp. 665–81 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.