| Issue |
MATEC Web Conf.
Volume 389, 2024
11th International Symposium on Occupational Health and Safety (SESAM 2023)
|
|
|---|---|---|
| Article Number | 00017 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/matecconf/202438900017 | |
| Published online | 10 January 2024 | |
Physico-chemical analysis and characterization of the flammability of metallic powders
National Institute for Research & Development in Mine Safety and Protection to Explosion – INSEMEX Petrosani, 32-34 G-ral. V. Milea Street, 332047, Romania
* Corresponding author: andrei.szollosi@insemex.ro
When fine particles known as flammable powders are suspended in the air under specific circumstances, they have the potential to explode. There could be many serious fatalities, injuries, and structural damage as a result of a dust explosion. By being aware of the flammability parameters and the physico-chemical analysis for flammable powders and taking additional protective measures as a result of the occurrence of these kinds of catastrophic mixes, the risk of such incidents can be decreased. The goal of this study was to determine the flammability characteristics of two combustible powders, magnesium and aluminum powder. These characteristics included the lowest ignition temperature of the dust cloud and dust layer as well as certain physicochemical studies of the composition.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.