MATEC Web Conf.
Volume 363, 20225th International Conference on Advances in Materials, Machinery, Electronics (AMME 2022)
|Number of page(s)||4|
|Published online||29 August 2022|
Discussion on Causes and Solutions of the Biting Mechanism of Stainless Steel Bolts
1 Inner Mongolia Power (Group) Co., Ltd., Inner Mongolia Power Research Institute Branch, Hohhot 010020, China
2 Inner Mongolia Enterprise Key Laboratory of High Voltage and Insulation Technology, Hohhot 010020, China
* Corresponding author: email@example.com
Due to the influence of the peculiar material characteristics, austenitic stainless steel bolts are always easy to be locked during disassembly. This is not only seriously affected the service performance of austenitic stainless steel bolts, but also affects the reuse of bolts. In this paper, the main causes and mechanism of the locking of austenitic stainless steel blots in the process of fastening is summarized, and the effective measures containing correct material selection, carefully clean before assembly, spraying loosening agent, thermal expansion method, raw material belt tape winding and development of anti-locking austenitic stainless steel fastening bolt to prevent locking through theoretical analysis and experimental verification are also provided, which is hoped that certain guiding significance can be provided to prevent the phenomenon of bolt locking from the source as far as possible.
Key words: Austenitic stainless steel / bolt / locked / mechanism / measurement
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.