MATEC Web Conf.
Volume 333, 2021The 18th Asian Pacific Confederation of Chemical Engineering Congress (APCChE 2019)
|Number of page(s)||5|
|Published online||08 January 2021|
Solvent Extraction of Scandium and Yttrium Using Carboxylic Acid
Department of Chemical Engineering, The University of Kitakyushu, Hibikino 1-1, Kitakyushu 808-0135, Japan
* Corresponding author: email@example.com
Separation of scandium (Sc) from yttrium (Y) in aqueous chloride media by solvent extraction using Versatic acid 10 was investigated. Conventional slope analysis method revealed the extraction equilibrium formulation of the metals. Sc is more strongly extracted than Y by Versatic acid 10, and the separation factor of the metals is quite high at 1.93 × 104. Complete stripping of Sc from the loaded organic solution of Versatic acid 10 was achieved by 3M HCl solution. Then Versatic acid 10 was applied to solvent impregnated resin (SIR), separation of Sc was progressed via Langmuir adsorption model.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.