MATEC Web Conf.
Volume 319, 20202020 8th Asia Conference on Mechanical and Materials Engineering (ACMME 2020)
|Number of page(s)||6|
|Published online||10 September 2020|
Research on Prediction Model of Conical Pick Cutting Force Based on Coulomb-Mohr Criterion
Jiangsu Xugong Construction Machinery Research Institute Co., Ltd, Xuzhou 221004, China
2 Sate Key Laboratory of Intelligent Manufacturing of Advanced Construction Machinery, Xuzhou 221004, China
* Corresponding author: firstname.lastname@example.org
Cutting force is one of the most important influence factors that affect the efficiency and service life of the conical pick. In order to accurately calculate the cutting force, through theoretical analysis and experimental research, a cutting force model consisted of the basic fracture parameters of rock, geometric parameters and installation parameters of pick is proposed based on the coulomb-mohr criterion, and the calculation model is corrected by whole cutting experimental data, and validated the corrected model by orthogonal test, the result show that the error of the cutting force model is about 10%, which meets the requirements of engineering data. At the same time, significant analysis on the cutting force is obtained by range method, cutting depth h > semi-tip angle β > cutting angle α.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.