| Issue |
MATEC Web Conf.
Volume 319, 2020
2020 8th Asia Conference on Mechanical and Materials Engineering (ACMME 2020)
|
|
|---|---|---|
| Article Number | 01004 | |
| Number of page(s) | 4 | |
| Section | Mechanical Design and Optimization | |
| DOI | https://doi.org/10.1051/matecconf/202031901004 | |
| Published online | 10 September 2020 | |
Identifying preventive maintenance guideline for a combine harvester with application of failure mode and effect analysis technique
Department of Industrial Engineering, Faculty of Engineering, Rajamangala University of Technology Thanyaburi (RMUTT), Klong-hok, Klong-luang, Thailand
* Corresponding author: voraya.w@en.rmutt.ac.th
The objective of this research was to study a risk assessment of the rice combine harvester using FMEA technique implementation and suggested the procedures to maintain the parts of the rice combine harvester by analyzing the causes of risk assessment of FMEA. The FMEA was also applied to specify failure causes and effects that occurred in the rice harvester. The obtained data were calculated for a risk priority number (RPN) and then sorted to be a descending order. The high RPN part was analyzed for the causes and effects and then suggested a preventive maintenance in near future. The results revealed that the highest RPN of 576 was found when a chain surface was considered and also showed the maximum risk among the considered parts in the rice combine harvester. While, the lowest RPN of 144 was found when a rice sieve part was considered but this RPN was still higher than that of 100 RPN which was required to specify the preventive maintenance.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.