MATEC Web Conf.
Volume 310, 20204th International Scientific Conference Structural and Physical Aspects of Construction Engineering (SPACE 2019)
|Number of page(s)||9|
|Published online||05 March 2020|
Verification of the initial setup of experimental device compared to the FEM model
Faculty of Civil Engineering, Institute of Structural Engineering, Vysokoškolská 4, 042 00 Košice, Slovakia
* Corresponding author: email@example.com
This paper compares and verifies the experimental membrane device with the model created in FEM software. At first, the experimental device needs to be properly set up and prepared. This includes settings of all input factors such as the placement of the technical fabric, the pretensioning of the edge ropes, the functionality of the actuators or load cells placed on the anchor rods. The numerical model in FEM software was created to confirm the functionality of the experimental device. Based on the results obtained by simple load cells measurements and the load results in the numerical model, it was confirmed that the behaviour of the experimental device coincided with the assumed behaviour of the membrane structure.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.