| Issue |
MATEC Web Conf.
Volume 277, 2019
2018 International Joint Conference on Metallurgical and Materials Engineering (JCMME 2018)
|
|
|---|---|---|
| Article Number | 03009 | |
| Number of page(s) | 10 | |
| Section | Material and Mechanics | |
| DOI | https://doi.org/10.1051/matecconf/201927703009 | |
| Published online | 02 April 2019 | |
Comparison of harmonic limits and evaluation of the international standards
1
Industrial Technology Research Institute of Zhengzhou University, P.R. China
2
State Grid Electric Power Research Institute of Henan Electric Power Company, P.R. China
* Corresponding author: wzj23@126.com
The paper takes the Chinese standard GB/T 14549-1993, the British Engineering Recommendation G5/4-1, the Institute of Electrical and Electronics Engineers IEEE Std 519-2014 and the part of IEC 61000-3 series standard as an example. Then summarize the difference of harmonic limits, the different processing methods of harmonic impedance, and the different summation law of each standard. Compare the harmonic limit calculation and evaluation methods of Chinese GB/T 14549-1993, British G5/4-1 and IEEE Std 519-2014 standard in detail, summarize the characteristics of the three standards in disturbance emission evaluation and introduce examples to verify the conclusion. Finally, summarize the characteristics and differences of mentioned harmonic standards.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.