MATEC Web Conf.
Volume 272, 20192018 2nd International Conference on Functional Materials and Chemical Engineering (ICFMCE 2018)
|Number of page(s)||6|
|Published online||13 March 2019|
The method of the phase control of the electrical installation during geodynamic monitoring
1 Belgorod State University, 85 Pobedy St, Belgorod, 308015, Russia
2 Vladimir State University, 87 Gor’kogo St, Vladimir, 600000, Russia
* Corresponding author: mailto:firstname.lastname@example.org
The paper substantiates the application of the phase control of the multipolar equipotential electrical installation to improve the geodynamic sensitivity of the geoelectric control method in geodynamic and geotechnical monitoring systems. The principle of the control of the source of sounding signals and the detection of geodynamics of the geological environment is shown in article. In this work is proposed the device on base of the phase modulator to eliminate the shortcomings of existing devices of the controlling of the phase of sound geoelectrical signals. The developed device contains two amplitude limiters, the integrating unit, the adder, the master oscillator and the amplitude modulator. In practice the application of the proposed device allow to obtain the technical and the economic efficiency by simplifying of the circuit of the generation of the signal with the phase-modulation, by increasing the linearity of the modulation characteristic, and by generating of the signal with the phase-modulate on output of the device.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.