Issue |
MATEC Web Conf.
Volume 272, 2019
2018 2nd International Conference on Functional Materials and Chemical Engineering (ICFMCE 2018)
|
|
---|---|---|
Article Number | 01043 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/matecconf/201927201043 | |
Published online | 13 March 2019 |
The method and mathematical support for calibration of a goniometric system based on the accelerometers
1 Belgorod State University, 85 Pobedy St, Belgorod, 308015, Russia
2 Vladimir State University, 87 Gor’kogo St, Vladimir, 600000, Russia
* Corresponding author: mailto:1155464@bsu.edu.ru
The article is devoted to the development of a calibration method for the goniometric system, which includes accelerometers. The complexity of the technological process of mechanical calibration of accelerometers was noted. It is proposed to apply software-algorithmic correction of measurement results. A mathematical model of signals of an accelerometer converter is described, which takes into account the influence of measurement errors. It is noted that in order to find the parameters of the mathematical model of an accelerometer signal, it is necessary to perform calibration. A mathematical model and the principle of calibration of the misalignment angle of the axes of the accelerometer are proposed and described. To evaluate the effectiveness of the proposed calibration method, experimental studies and data processing of the accelerometer were carried. As a result of experimental studies, an estimation of the degree of error compensation of the ADIS 16534 accelerometer measurements was performed with the application of the modified multi-position calibration method and the calibration method proposed by the authors of this article.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.