Issue |
MATEC Web Conf.
Volume 272, 2019
2018 2nd International Conference on Functional Materials and Chemical Engineering (ICFMCE 2018)
|
|
---|---|---|
Article Number | 01044 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/matecconf/201927201044 | |
Published online | 13 March 2019 |
The method of forming probing signals of georadars on the basis of direct digital synthesizers for geodynamic monitoring
1 Belgorod State University, 85 Pobedy St, Belgorod, 308015, Russia
2 Vladimir State University, 87 Gor’kogo St, Vladimir, 600000, Russia
* Corresponding author: 1155464@bsu.edu.ru
The features of the formation of probing signals based on direct digital synthesizers for geodynamic monitoring of medias using georadar probing are considered in the article. The basic requirements for the formers of probing signals and the shortcomings of known technical solutions are shown. To eliminate them, as a former of probing signals of georadars was suggested to use direct digital synthesizers with improved spectral characteristics, achieved by introducing circuit of an automatic compensation of phase distortion with a control device in the form of a phase-locked loop. With this construction, the device contains a combination of autocompensation and filter methods of improving the spectral characteristics of the output signal of the synthesizer. To analyze the effectiveness of the proposed solutions, were obtained the necessary mathematical relationships describing the functioning of the device under research and implemented its schematic simulation, which showed the possibility of improving the spectral characteristics of the proposed former of probing signals by 10-15 dB.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.