MATEC Web Conf.
Volume 263, 2019Research, Production and Use of Steel Ropes, Conveyors and Hoisting Machines (VVaPOL 2018)
|Number of page(s)||7|
|Published online||30 January 2019|
Design of machine to remove sharp edges
TU Košice, Faculty of Manufacturing Technologies with seat in Prešov,
2 TU Košice, Faculty of Mining, Ecology, Process Control and Geotechnologies, Košice, Letná 9, 04201, Slovakia
3 Michalovce, Podjavorinskej 25, 071 01, Slovakia
* Corresponding author: firstname.lastname@example.org
This article deals with the design of machine to remove sharp edges of components for manufacturing. After working with any technology, pressing, casting or machining, sharp edges and dirty surfaces of the finished parts need to be clean and removed by sharp edges. Serial production machines are expensive and are unprofitable for piece and small-lot production. Design materials, electric drives, coupling and damping components selected for the design.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.