| Issue |
MATEC Web Conf.
Volume 232, 2018
2018 2nd International Conference on Electronic Information Technology and Computer Engineering (EITCE 2018)
|
|
|---|---|---|
| Article Number | 04021 | |
| Number of page(s) | 5 | |
| Section | Circuit Simulation, Electric Modules and Displacement Sensor | |
| DOI | https://doi.org/10.1051/matecconf/201823204021 | |
| Published online | 19 November 2018 | |
Stress relaxation of the infusion tube with a pressure sensor
Georgetown Preparatory School, Bethesda MD, US
We studied stress relaxation of the infusion tube with a pressure sensor using FEA method. The stress distribution in the tube, the contact pressure on the wall of the pressure sensor, the decay of the reaction force on the wall of the pressure sensor were determined, respectively. Due to the stress relaxation of the infusion tube, the reaction force generated by the tube deformation was decreased by over 75% as compared with the original reaction force in the first several seconds after the infusion tube was set into the pressure sensor.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.