| Issue |
MATEC Web Conf.
Volume 225, 2018
UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018)
|
|
|---|---|---|
| Article Number | 03023 | |
| Number of page(s) | 11 | |
| Section | Energy Management and Conservation | |
| DOI | https://doi.org/10.1051/matecconf/201822503023 | |
| Published online | 05 November 2018 | |
EFFECT of DG Optimizing on overload Transmission line Stability
Faculty of Engineering Technology, University Malaysia Pahang, Gambang 26300, Malaysia.
* Corresponding author: dramaide@yahoo.com
Typical steady state studies always treat the peak power demands as the worst case conditions. Periods of light load are also critical in the assessment of the possible state of a power system. While heavy load conditions are generally associated with overload, low voltage and generation deficiency, light load conditions may give rise to over-voltage and undesirable reactive power requirements at generation side. This paper focus on study the effect of DG Optimizing on overload Transmission line Stability. The system dispatch constraints should be taken into account to compensate or varying DG generation output and to enhance the operational performance of power systems. This dispatching operation depends on the change of DG generation and the dispatching strategy. The impact of DG generation uncertainty is limited with the generation dispatching operation and should not be neglected in system analysis.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.