Issue |
MATEC Web Conf.
Volume 222, 2018
3rd International Workshop on Flexibility in Sustainable Construction (ORSDCE 2018)
|
|
---|---|---|
Article Number | 01015 | |
Number of page(s) | 8 | |
DOI | https://doi.org/10.1051/matecconf/201822201015 | |
Published online | 29 October 2018 |
Analysis of selected input data impact on energy demand in office building - case study
Institute of Environmental Engineering, Poznan University of Technology, Berdychowo 4, 60–965 Poznan, Poland
* Corresponding author: joanna.sinacka@put.poznan.pl
In the building designing process special attention should be paid to energy calculations - with analysis of different input data low energy or passive house can be obtained and decision of which parameters can or cannot be changed may be made. The following input data was analysed: shape factor A/V, glazed area, internal heat gains, air tightness, efficiency of heat recovery. The results show that the input data for the energy calculations are crucial for the obtained result.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.