MATEC Web Conf.
Volume 220, 20182018 The 2nd International Conference on Mechanical, System and Control Engineering (ICMSC 2018)
|Number of page(s)||5|
|Section||Mechanical and Electronic Engineering|
|Published online||29 October 2018|
Integrated Smart Plug Design
Electrical Engineering Department, Universitas Sumatera Utara, Jalan Almamater, 20155, Medan, Indonesia
Smart plug technology currently for user providing one plug module that is able to monitor and control the state of electrical appliance. The addition of plug number gives some deficiencies such as from cost point of view. By looking at the disadvantage made the tool which is able to monitor and control electrical appliance so that smart plug more than one integrated plug module. The manufacture of plug modules includes system design, sensor type selection in module, data delivery process, comparison of measurement module with measuring instrument and system test. From the results of the design is known that the module can perform data transmission, display the monitoring page and do the control and obtained percent accuracy of current readings obtained between 91.50% to 99.61% and the percent accuracy of the voltage readings obtained are ranged between 98.95% to 99.90%.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Initial download of the metrics may take a while.